Electrical
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
This 6 ft. 50 Amp 4-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Black in color
- UL Listed
The Southwire 3/4 in. x 6 ft. Liquidtite Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Brand received (Cerrowire or Southwire) varies by zip code
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
- Brand received (Cerrowire or Southwire) varies by zip code
- Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
- Power, lighting, control and signal circuits
- Fished or embedded in plaster
- Concealed or exposed installations
- Environmental air-handling spaces per NEC 300.22 (C)
- Places of assembly per NEC 518.4 and theaters per NEC 520
- Installation in cable tray and approved raceways
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) and 645.5(D)(2)
- Conductors are cabled together and wrapped with a binder tape bearing the print legend
- Aluminum interlocking armor jackets
Southwire offset lugs are used in termination of a conductor. These lugs are designed for single hole mount. Durable copper alloy construction. Specified for use with #8 STR - #2 STR Wire.
- cULus Listed
- Wire range: # 8 STR - # 2 STR
- Single 1/4 in. hole mount
- Rated 600-Volt/90°C
- 2-pack
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
This 6 ft. 30 Amp 3-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Gray in color
- UL Listed
The Romex Type NM-B Copper Building Wire comes with a patented SIMpull Cable Jacket that significantly simplifies the process of pulling, stripping, and installation. This cable is a familiar choice in residential building wiring, frequently serving as a reliable branch circuit to power switches and outlets. Designed exclusively for above-ground installation in dry settings, it confidently carries a 600-volt voltage rating, emphasizing its durability and performance. Notably adaptable, the NM-B cable can be seamlessly routed through air voids within masonry block or tile walls, as long as these surfaces remain unaffected by moisture. Proudly displaying the Made in America label, this cable effortlessly blends innovation with a commitment to quality craftsmanship.
- NM-B has 2-conductors, 3-conductors and 4-conductors and available with 2-neutrals, construction designed for easier pulling
- Copper conductors are annealed (soft) copper, UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
Type NM-B (non-metallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
- Copper conductors are annealed (soft) copper and UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Run in air voids of masonry block and tile walls
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
- 12-Gauge
- NM-B has 2, 3 and 4-conductors and available with 2 neutrals, construction designed for easier pulling
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks, and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Southwire Ultratite Liquidtite Flexible Non-Metallic PVC Conduit, 1/2" X 100'. Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit. Brand Received (Cerrowire Or Southwire) Varies By Zip Code. Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less. Flexible, Rigid PVC Construction For Crush Resistance. Liquid-Tight Design Protects Against Vapors, Solids And The Weather For Use In Applications Requiring Movement, Crossover Connections Or Tight Bends. Accommodates Use In Motor Circuit Applications As Raceways For Motor Feeders, Branch And Control Circuits. Use For Conductors Of Motor Feeders, Branch And Control Circuits. UL And CSA Safety Listings. Mfg #55094201. Mfg #55094201
- Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit
- Brand Received (Cerrowire Or Southwire) Varies By Zip Code
- Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less
- Flexible, Rigid PVC Construction For Crush Resistance
The Southwire 500 ft. Brown 18/2 Thermostat and Bell Cable is rated to 150-Volt and is classified as class-2 power-limited circuit cable. This thermostat and bell cable offers solid copper conductors with PVC insulation. This thermostat wire is also sunlight resistant.
- For use in heating and air conditioning controls
- Rated -20 degree C to 60 degree C
- Used in bell and alarm systems
- UL Listed
- Flat design
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
This 6 ft. 30 Amp 4-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Black in color
- UL Listed
The Southwire 250 ft. 18/8 thermostat wire features inner conductor material encased in a brown PVC jacket. The solid wire is designed for use in interior residential applications such as thermostats. Thermostat wire is a class 2 power-limited circuit cable.
- Solid copper conductors with 6 mils of polypropylene insulation, conductors are paralleled and covered
- Rated 150-Volt
- Sunlight resistant from -20 degree C to +60 degree C
- UL listed, GreenSpec and RoHS compliant
This 4 ft. 50 Amp 4-wire range cord with right angle plug which allows installation closer to the wall. The strain relief bracket ensures safe installation. This item is UL certified.
- Flanged spade terminals
- Metal strain relief
- Black in color
- UL Listed
The Southwire 500 ft. Brown 18-5 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.
- UL listed
- Designated as class-2 power-limited circuit cable
- Rated at 150-Volt
- Solid copper conductors
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is constructed from a durable copper alloy. Specified for use with # 4 STR - 1/0 STR Equal Run and Tap.
- cULus listed
- # 4 STR - 1/0 STR equal run and tap
- Minimum tap with maximum main: # 14 SOL/STR
- Rated 600-Volt/90C
- 1-pack