Garage Door Hardware
Open and close your garage door with ease from inside the garage, thanks to the Genie Universal Wall Button. This non-lit door wall button is universally compatible with most major garage door opener brands, and can be used in addition to any existing wall button or wall console. Installation is quick and easy, and all mounting hardware and installation instructions are included. The non-lit wall button mounts to a side wall and wires directly to the garage door opener. This universal wall push button is compatible with most Genie garage door openers and most major garage door opener brands. Cannot be used on Series III generation Genie units or Liftmaster/Chamberlain/Craftsman 2.0.
- Simple, push button operation
- Easy to install
- Direct wiring to the garage door opener required
- Designed for hassle-free installation; complete installation instructions included
- OPGSXT5001B 1/2HP 1PH Standard Duty Trolley Operator for 20' high Sectional Doors (with Brake)
- OPGSXT5003 Standard Duty Trolly 1/2 HP 3 PH for 12' high Sectional Door with Brake
- Commercial Timer to Close Module / plug & play / additional control options and edge interface
Monitor and control a second or third door with your Aladdin Connect Smart Device garage door system. The Door Position Sensor works with the Aladdin Connect Door Control Module. The sensor is easy to program and installs easily.
- Control up to 3-garage doors from your Aladdin connect smart device with additional sensors
- Uses Bluetooth technology to connect with the door control module
- Includes battery
- Includes mounting hardware
- A C-channel extension to be used in addition to 7 ft. (3-piece) rail to accommodate an 8 ft. high door
- The extension kit is designed specifically for the Genie c-channel belt-drive openers
- OPGSXT5003 Standard Duty Trolly 1/2 HP 3 PH for 16' high Sectional Door with Brake
- Medium Duty Trolly Operator Rail Assembly for 14' high sectional doors
- OPGSXJ5003B Standard Duty Jackshaft 1/2HP 3 PH (Brake) Right Hand for Sectional Doors
- OPGSXT5001B 1/2HP 1PH Standard Duty Trolley Operator for 18' high Sectional Doors (with Brake)
- Commercial Monitored Edge Module / used to interface door edge monitor in lue of photo eye
- OPGSXT5001B 1/2HP 1PH Standard Duty Trolley Operator for 12' high Sectional Doors (with Brake)
- OPGHXH5003B Heavy Duty Hoist Operator 1/2 3 PH (Brake) for Rolling Door
- OPGMXJ5011B 1/2 HP -1 PH Medium Duty Jackshaft Operator for Rolling doors (with brake)
- Commercial Retro-Reflective Safe-T-Beam System / doors up to 35' wide / NEMA 4 Rated
- Commercial Monitored Edge Link - Wireless Monitored Edge interface
- OPGHX5001B Heavy Duty Hoist Operator 1/2HP 1 PH (Brake) for Sectional Doors
- OPGSXH5001BL Standard Duty Hoist Operator 1/2HP 1PH (Brake) Left Hand Sectional Doors
The Universal Screw Drive Lubricant features a lithium-grease formula and is designed specifically for Genie screw drive opener rails. Apply it annually in 1 in. dabs at 3 points along the rail for best results. The lube prolongs the life of the screw drive rail and improves performance.
- Designed specifically for Genie screw drive opener rails
- Lithium-grease composition
- Applies easily; prolongs long life of screw drive rail and smooth operation
- Recommended for application in 1 in. dabs at 3 points along the rail once per year
- Sold as a 3-pack
- OPGHXH7503B Heavy Duty Hoist Operator 3/4 HP 3 PH (Brake) Rolling Door
- OPGSXT5003 Standard Duty Trolly 1/2 HP 3 PH for 14' high Sectional Door with Brake
- OPGMXT5011 - 1/2 HP 1 PH Medium Duty Trolly Operator for 12" high sectional door (no brake)
- OPGSXJ5003B Standard Duty Jackshaft 1/2HP 3 PH (Brake) Right Hand for Rolling Doors
The Genie Universal Garage Door Emergency Release Kit offers the means to release the garage door carriage from the drive system and open it manually. Has a keyed entry for ease of operation. Ideal for use with electrical power outage or operation failure.
- Compatible with all brands of garage door openers
- Keyed entry allows only the key holder to override the garage door; includes 2-keys
- Ideal for buildings that do not have an alternate entry-way to the garage
- Kit allows user to release the garage door carriage from the drive system and then manually lift the garage door open
- Non-corrosive, stainless steel faceplate
- Detailed installation instructions included
- Commerical Jackshaft - Hoise Chain tensioner / Structural reinforcement 1" door shaft
Genie's extension kit for tube belt drive rail is to be used in addition to a 7 ft. (5 piece) tube belt drive rail to accommodate an 8 ft. high door. This kit is designed for the Genie exposed belt garage door openers. This kit comes with everything needed to convert your standard 7 ft. Genie garage door opener to fully lift your 8 ft. high garage door. Kit contents; new longer garage door opener belt and snap together rail extension.
- Easy and quick to install rail system
- Works on ultra-quiet belt drive system
- Enables garage door operators to fully open 8 ft. tall doors
- Compatible with model numbers 2055,3053,3055,7055
- Includes rail extension, belt and hardware
- All US based technical service representatives are available 6 days a week at 1-800-354-3643
- OPGMXH5001BR 1/2HP 1 PH Medium Duty Hoist Operator for Rolling Doors (with Brake)
- OPGHXH5003B Heavy Duty Hoist Operator 1/2 3 PH (Brake) for Sectional Door
- Rail Kit for Standard Duty Trolley Operators 20' high Sectional Doors
- OPGMXT5011 - 1/2 HP 1 PH Medium Duty Trolly Operator for 10" high sectional door (no brake)
- The Genie Safe-T-Beam Replacement Kit to replaces broken or faulty safety beam's on your current Genie garage door system
- OPGSXT5001B 1/2HP 1PH Standard Duty Trolley Operator for 10' high Sectional Doors (with Brake)
- Rail Kit for Standard Duty Trolley Operators 10 high Sectional Doors
- Commercial Antenna Extension Kit / 20' coax with antenna mount F connector
- OPGSXH5003BL Standard Duty Hoist Operator 1/2HP 3 PH (Brake) Left Hand Sectional Doors
- OPGSXT5003 Standard Duty Trolly 1/2 HP 3 PH for 20' high Sectional Door with Brake
- Rail Kit for Standard Duty Trolley Operators 16' high Sectional Doors
- OPGSXT5001B 1/2HP 1PH Standard Duty Trolley Operator for 16' high Sectional Doors (with Brake)
The Screw Drive Rail Extension Kit is designed for Genie C-Channel screw drive rails and installs easily to extend a 7 ft rail for 8 ft doors. The Drive screw is included for added value and convenience. The Kit is compatible with the Genie PowerLift, MachForce and Excelerator screw drive garage door opener systems built after 2013.
- Extension for Genie C-channel screw drive rails
- Suitable for doors up to 8 ft. high, extends 7 ft. rails
- Drive screw included
- Easy installation, detailed instructions included
- OPGSXH5001BL Standard Duty Hoist Operator 1/2HP 1PH (Brake) Left Hand Rolling Doors
- OPGSXJ5001B Standard Duty Jackshaft 1/2HP 1 PH (Brake) Right Hand Sectional Door
- OPGMXT5011 - 1/2 HP 1 PH Medium Duty Trolly Operator for 14" high sectional door (no brake)
- OPGHXT5001 Heavy Duty Trolley Operator 1/2HP 1 PH (brake) for 20' high sectional doors
- OPGHXH1001B Heavy Duty Hoist Operator 1 HP 1 PH (Brake) for Rolling Door
- Commercial Auxiliary Output Module / plug & play / ADA - Lamp - Limit output interface
- OPGSXH5001BR Standard Duty Hoist Operator 1/2HP 1PH (Brake) Right Hand for Sectional Doors
- OPGMXJ5011B 1/2 HP -1 PH Medium Duty Jackshaft Operator for Sectional doors (with brake)
- OPGHXH1003B Heavy Duty Hoist Operator 1 HP 3PH (Brake) Rolling Door
