Regulators & Regulator Attachments
The R3001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances. Its Higher Flow assure You better appliance performance. May be installed with a variety of inlet and outlet fittings and accessories.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 200,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- 1/4 in. FNPT inlet x 3/8 in. FNPT outlet
- UL listed
- Install outdoors only
The R3001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances. Its Higher Flow assure You better appliance performance. May be installed with a variety of outlet fittings or accessories.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 200,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- POL inlet and 3/8 in. FNPT outlet
- UL listed
- Install outdoors only
The R5002 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using a Quick connect type 1 connector on Inlet. Very easy to use. Just connect the hose to the Grill or Heater.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 60,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Quick connect type 1 inlet
- 24 in. L hose with 3/8 in. F flare end fitting on outlet
- UL and CSA listed
- Install outdoors only
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Twin stage compact regulator
- POL x ½"
- 750,000 BTU
- Made in Italy
The R3001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using a Quick connect type 1 connector on Inlet. Its Higher Flow assure You better appliance performance. Very easy to use.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 200,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Quick connect type 1-inlet x 3/8 in. FNPT outlet
- UL and CSA listed
- Install outdoors only
This has a 2PSI Application. This is a LP gas regulator with 11 in. water WC. This is for use after the 2nd stage regulator at the appliance.
- Use After The 2Nd Stage Regulator At The Appliance
- Use with Tracpipe System
- Must be installed in a horizontal position
- For Natural Gas gas
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ¾" x ¾" BM
- 1,000,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- POL x ¾"
- 2,250,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- ¼" x ½"
- 1,000,000 BTU
- Made in Italy
This has a 2PSI Application.. It reduces pressure to 7 in. W.C. For Natural Gas. This is for use after the 2nd stage regulator at the appliance.
- Use After The 2Nd Stage Regulator At The Appliance
- Use with Tracpipe System
- Must be installed in a horizontal position
- For Natural Gas gas
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ½" x ¾"
- 1,400,000 BTU
- Made in Italy
The R7003 LPG Adjustable Regulator is suggested for Cookers or Fryers using High Pressure LPG using a POL connector on inlet. High pressure 12 psi LGP outlet. Friendly operation knob.
- For cookers or fryers using LPG
- 500,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Adjustable from 0 to 12 psi outlet pressure
- Soft nose POL inlet x 1/4 in. FNPT outlet
- UL listed
- Install outdoors only
- Designed to serve typical domestic installations
- Constructed of corrosion-resistant and wear-resistant materials, includes inlet screen
- Easy system checks can be made on these units, which have built-in gauge taps on both the upstream and downstream sides
- Equipped with overpressure protection with an internal relief valve and a travel stop on the closing cap
- Operating inlet pressure 10 psig
- Temperature capabilites: -20 degree to 150 degree C or -29 degree to 66 degree C
- Compliant with NFPA 58 requirements
- Green, straight through design
- 20 year recommended replacement life
- 875,000 BTU/HR
- 1/2" FNPT Inlet
- 1/2" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage compact regulator
- ½" x ½"
- 800,000 BTU
- Made in Italy
- Designed for use as the first regulator of a two-stage regulator system
- Compact design provides easy installation in tight installations and underground tank installations
- For domestic applications, constructed of corrosion and wear resistant materials
- Positive draining spring case
- Red straight through design vent pointing down
- Features overpressure protection, inlet screen and built in 1/8" gauge taps in both the inlet and outlet sides
- 1,100,000 BTU/HR
- 1/4" FNPT Inlet
- 1/2" FNPT Outlet
- 10 psig Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Designed for regular weight kalamein doors and hollow metal frames
- Features beveled surface leaf
- Comes with a non-rising removable pin
- Includes all necessary hardware for convenient installation
- Designed for use as the first regulator of a two-stage regulator system
- For domestic applications, constructed of corrosion and wear resistant materials
- 3/4" FPT drip lip-vent reduces risk of blackage when properly installed
- Red straight through design vent pointing down
- Features overpressure protection, inlet screen and built-in 1/8" gauge taps in both the inlet and outlet sides
- 20 year replacement life and double failure protection
- 2,100,000 BTU/HR
- FPOL Inlet
- 1/2" FNPT Outlet
- 8-12 psig Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
These pigtails and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psi pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Pol x 1/4 in. MPT
- 7/8 hex
- 1/4 in. tube O.D.
- Short nipple
- Designed for installations with small capacity loads
- Compact design allows for easy installation in confined spaces and is ideal for ASME tanks used on small domestic loads
- Intermediate and outlet gauge taps for easy system testing
- Large orifice minimizes freeze problems
- Can be used on twin cylinder hook-ups on travel trailers and stationary applications
- Gray, straight through design
- 450,000 BTU/HR
- 1/4" FNPT Inlet
- 1/2" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This has a 2PSI Application. It reduces pressure to 7 in. W.C. for Natural Gas. Use after the 2nd stage regulator at the appliance.
- For Natural Gas
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Two pound full size regulator
- ½" x ½"
- 1,460,000 BTU
- Made in Italy
- Reduces outlet pressure from 10 psig to 11" W.C.
- Corrosion resistant with built-in 1/8" gauge taps on both the upstream and downstream sides
- Over pressure protection and inlet screen
- All models are color coded green for easy identification as a second stage regulator
- 20 year replacement life and double failure protection
- 1,000,000 BTU/HR
- 1/2" FNPT Inlet
- 3/4" FNPT Outlet
- 9.0"-13" W.C. Outlet Pressure Rating
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Twin stage full size regulator
- POL x ¾"
- 1,400,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ¾" x ¾"
- 1,400,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ½" x ¾" BM
- 800000 BTU
- Made in Italy
This has a 2PSI Application. It reduces pressure to 7" W.C. for Natural Gas. This is for use after the 2nd stage regulator at the appliance.
- Use After The 2Nd Stage Regulator At The Appliance
- Use with Tracpipe System
- Must be installed in a horizontal position
- For Natural Gas
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Two pound compact regulator
- ½" x ½"
- 700,000 BTU
- Made in Italy
- Designed to serve typical domestic installations
- Constructed of corrosion-resistant and wear-resistant materials, includes inlet screen
- Easy system checks can be made on these units, which have built-in gauge taps on both the upstream and downstream sides
- Equipped with overpressure protection with an internal relief valve and a travel stop on the closing cap
- Operating inlet pressure 10 psig
- Temperature capabilites: -20 degree to 150 degree C or -29 degree to 66 degree C
- Compliant with NFPA 58 requirements
- Green, straight through design
- 20 year recommended replacement life
- 1,400,000 BTU/HR
- 3/4" FNPT Inlet
- 3/4" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The R5001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using POL inlet. 90 degree angle makes easy to use. Just connect the hose to the Grill or Heater.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 60,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Soft nose POL inlet
- 24 in. L hose with 3/8 in. F flare end fitting on outlet
- UL and CSA listed
- Install outdoors only
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- POL x ½
- 2100000 BTU
- Made in Italy
The R5001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using Quick Connect type 1-inlet. QC makes easy to connect to Cylinder. Assemble it with your prefer hose connector length.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 60,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Quick connect type 1-inlet x 3/8 in. FNPT outlet
- UL and CSA listed
- Install outdoors only
- Designed for use as the first regulator of a two-stage regulator system
- For domestic applications, constructed of corrosion and wear resistant materials
- 3/4" FPT drip lip-vent reduces risk of blackage when properly installed
- Red straight through design vent pointing down
- Features overpressure protection, inlet screen and built-in 1/8" gauge taps in both the inlet and outlet sides
- 20 year replacement life and double failure protection
- 2,250,200 BTU/HR
- FPOL Inlet
- 3/4" FNPT Outlet
- 8-12 psig Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Designed to serve typical domestic installations
- Constructed of corrosion-resistant and wear-resistant materials, includes inlet screen
- Easy system checks can be made on these units, which have built-in gauge taps on both the upstream and downstream sides
- Equipped with overpressure protection with an internal relief valve and a travel stop on the closing cap
- Operating inlet pressure 10 psig
- Temperature capabilites: -20 degree to 150 degree C or -29 degree to 66 degree C
- Compliant with NFPA 58 requirements
- Green, straight through design
- 20 year recommended replacement life
- 1,400,000 BTU/HR
- 1/2" FNPT Inlet
- 3/4" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
- Reduces outlet pressure from 10 psig to 11" W.C.
- Over pressure protection and inlet screen
- Color coded green for easy identification as a second stage regulator
- 20 year replacement life and double failure protection
- 2,600,000 BTU/HR
- 1" FNPT Inlet
- 3/4" FNPT Outlet
- 9.0"-13" W.C. Outlet Pressure Rating
- Reduces outlet pressure from 10 psig to 11" W.C.
- Corrosion resistant with built-in 1/8" gauge taps on both the upstream and downstream sides
- Over pressure protection and inlet screen
- All models are color coded green for easy identification as a second stage regulator
- 20 year replacement life and double failure protection
- 1,000,000 BTU/HR
- 3/4" FNPT Inlet
- 3/4" FNPT Outlet
- 9.0"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The R5001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances with side burner using Quick Connect type 1-inlet. Very easy to use. Just connect the 2-hoses to the Grill and side burner.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 60,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Quick connect type 1-inlet x 3/8 in. FNPT outlet
- Dual two 21 in. L hose with 3/8 in. F flare end fitting on each outlet
- UL and CSA listed
- Install outdoors only
- Designed for installations with small capacity loads
- Compact design allows for easy installation in confined spaces and is ideal for ASME tanks used on small domestic loads
- Intermediate and outlet gauge taps for easy system testing
- Large orifice minimizes freeze problems
- Can be used on twin cylinder hook-ups on travel trailers and stationary applications
- Gray, straight through design
- 450,000 BTU/HR
- FPOL Inlet
- 1/2" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The R5001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using a POL connector on Inlet. 90 degree angle makes easy to use. Assemble it with your prefer hose connector length.
- For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
- 60,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Low pressure outlet 11 in. W.C.
- Soft nose pol inlet and 3/8 in. FNPT outlet
- Weather resistant and damage resistant
- Install outdoors only
- Recommended for mobile homes and average residential service where separation of the first- and second-stage regulators is not cost effective
- FPOL connection on the #R632HCF and #R632JFF make for easy single-stage regulator replacement
- Built-in gauge taps
- Stainless steel inlet screen
- Maximum allowable inlet pressure: 250 psig
- Temperature capabilities: -20 degree to 150 degree F or -29 degree to 66 degree C
- Gray, straight through design
- 850,000 BTU/HR
- 1/4" FNPT Inlet
- 3/4" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage compact dielectric
- ½" x ½"
- 800,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size dielectric
- 3/4 in. x 3/4 in.
- 1,400,000-BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ¾" x ¾" Angle
- 920,000 BTU
- Made in Italy
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Twin stage full size regulator
- ¼" x ¾"
- 1,460,000 BTU
- Made in Italy
The R7000 LPG regulator is suggested for Cookers or Fryers using High Pressure LPG. Its Higher Flow to a High Pressure permits You a superior cooker performance. May be installed with a variety of inlet and outlet fittings and accessories.
- For cookers or fryers using LPG
- 500,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Set to 12 psi outlet pressure
- 1/4 in. FNPT inlet x 1/4 in. FNPT outlet
- UL listed
- Install outdoors only
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ¾" x ¾" BM
- 1,000,000 BTU
- Made in Italy
- Reduces outlet pressure from 10 psig to 11" W.C.
- Corrosion resistant with built-in 1/8" gauge taps on both the upstream and downstream sides
- Over pressure protection and inlet screen
- All models are color coded green for easy identification as a second stage regulator
- 20 year replacement life and double failure protection
- 920,000 BTU/HR
- 1/2" FNPT Inlet
- 3/4" FNPT Outlet
- 9.0"-13" W.C. Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Operating inlet pressure 10 psig
- Temperature capabilites: -20° to 160°C or -29° to 71°C
- Compliant with NFPA No. 54 and 58 standards
- Green, straight through design
- 20 year recommended replacement life
- 650,000 BTU/HR
- 1/2" FNPT Inlet
- 1/2" FNPT Outlet
- 9.5" to 13" W.C. Outlet Pressure Rating
- Features 2 rotating metal racks for storing essentials
- Features pocket screwed joints for cabinet strength
- Designed to install in a 36 in x 36 in corner wall area
- Measures 36 in. W x 34-1/2 in. H x 24 in. D
- Recommended for mobile homes and average residential service where separation of the first- and second-stage regulators is not cost effective
- FPOL connection on the #R632HCF and #R632JFF make for easy single-stage regulator replacement
- Built-in gauge taps
- Stainless steel inlet screen
- Maximum allowable inlet pressure: 250 psig
- Temperature capabilities: -20 degree to 150 degree F or -29 degree to 66 degree C
- Gray, straight through design
- 750,000 BTU/HR
- FPOL Inlet
- 1/2" FNPT Outlet
- 9.5"-13" W.C. Outlet Pressure Rating
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- Second stage full size regulator
- ¾" x ¾" Angle
- 920,000 BTU
- Made in Italy