Searched for "40141616"
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- For 420 lb. vertical tank or 300 liter horizontal tanks
- Double O-ring stem seal
- 3/4" Inlet x POL outlet
- Sturdy brass handwheel
- Static seat disc does not rotate, improves service life
- Incorporates fixed liquid level gauge
- Can only be used as an accessory valve on containers that have an independent pressure relief valve capable of handling that container's capacity
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 30 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 30 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4.7"
- For vapor service on ASME domestic tanks with separate filler, relief and liquid withdrawal valve
- Incorporates a service valve, vapor return valve, fixed liquid level gauge
- Two seals, a back seat and an O-ring
- Easy seal replacement
- Less dip tube breakage
- Convenient level gauge
- 3/4" MNPT tank connection, female POL vapor service connection, 1-1/4" M. ACME vapor line connection
- 1/4" FNPT gauge boss
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Installed on LP gas motor fuel lines for lift truck systems
- Provides a quick closing coupling in the fuel line
- Couplings have an internal check valve that opens by attaching the two units
- 1-1/4" F. ACME Inlet
- 1/4" FNPT Outlet
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 20 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4"
Never again worry about accidental tipping during use or transport with the Flame King Propane Cylinder Stabilizer Base. The wide base offers a stable platform for 20 lbs., 30 lbs. and 40 lbs. tanks. Made of high quality plastic and compact for easy storage. Push tank firmly into the Stabilizing Base.
- Helps prevent accidental tipping of propane cylinder when cylinder is fully inserted into the base
- For use with 20 lbs., 30 lbs. and 40 lbs. propane tanks
- Impact resistant base easily attaches to tank
- Keeps cylinder in place during storage or travel
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 1852 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- 1" NPT PRV Internal DOT
- 375PSI
- With cap
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 2795 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
This non-handed bi-fold door is made from 24-gauge steel. It includes a half-louvered style, a baked enamel exterior, and complete track and hardware.
Sizes
The finished opening size for this bifold door is 42" x 80". However, its actual size is 41-1/2" x 78-1/2".
- Made of 24-gauge steel for durability
- Features a stylish half-louvered style design
- Baked enamel exterior creates a neat appearance
- Comes with complete track and hardware for easy installation
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 13 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Leak resistant design
- Double O-ring stem seal
- Tamper proof design
- Sturdy forged brass handle
- Static seat disc
- Recessed excess flow valve
- Normal application forklifts
- 3/4" MNPT cylinder x 3/8" MNPT outlet
- 2.6 gpm excess flow closing
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Used for 100-200 lb. DOT or ASME tanks
- Includes service valve, back check filler valve, fixed liquid level gauge
- New high discharge flow capacity pressure relief valve
- Reduced filler valve chamber decreases the waste of LPG during filling
- Increased high filling capacity
- Tank connection: 3/4" MPT
- Vapor service connection: POL (CGA 10)
- Filler connection: 1-3/4" ACME
- 10.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
- Permits ASME tanks to be evacuated when it is necessary to relocate a tank
- Not designed as a full time liquid outlet
- Activated by inserting a Schedule 80 pipe nipple, with suitable shutoff valve, into valve outlet
- 3/4" MNPT container connection, 3/4" FNPT outlet
- 8 GPM UL closing flow
- 1-15/16" wrenching hex
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- 90 Degree Safety Filler Valve with AUTO & MANUAL Shutoff Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Installed on LP gas motor fuel lines for lift truck systems
- Provides a quick closing coupling in the fuel line
- Couplings have an internal check valve that opens by attaching the two units
- 3/8" FNPT Inlet
- 1-1/4"M Acme
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
- Used for 100-200 lb. DOT or ASME tanks
- Includes service valve, back check filler valve, fixed liquid level gauge
- New high discharge flow capacity pressure relief valve
- Reduced filler valve chamber decreases the waste of LPG during filling
- Increased high filling capacity
- Tank connection: 3/4" MPT
- Vapor service connection: POL (CGA 10)
- Filler connection: 1-3/4" ACME
- 11.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 4312 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.