Tanks & Tank Valves
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 20 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4"
The Flame King 20LB Propane Tank is a pre-purged vacuum ready for filling of propane avoiding you the cost and headache of purging your new tank. It is built from high-grade welded steel and powder-coated for rust prevention. For your safety, your tank comes with an OPD valve to prevent overfilling as well as x-ray and hydrostatic tested. You can be sure to transport safely both in the US and CA as they are DOT and Transport Canada certified.
- High grade steel welded construction
- Premium OPD valve assembly
- Powder coated for long lasting exterior protection
- DOT approved
- X-ray and hydrostatic tested
- Comfortable hand-holds in the collar for easier lifting
- Tank arrives empty, pre-vacuum purged and ready to be filled with propane
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Indicates the maximum filling level
- 1/4" MNPT container connection
- 5.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The Flame King 40LB Propane Tank is pre-purged vacuum ready for filling of propane avoiding you the cost and headache of purging your new tank. It is built from high grade welded steel and powder coated for rust prevention. For your safety, your tank comes with an OPD valve to prevent overfilling as well as x-ray and hydrostatic tested. You can be sure to transport safely both in the US and CA as they are DOT and Transport Canada certified.
- Safety first - flame king tanks arrive empty, pre-vacuum purged and ready for filling with LP gas - they are x-ray and hydrostatic tested plus Department of Transportation (DOT) and Transport Canada (tc) certified
- High quality - each tank is constructed from high grade welded steel and powder coated for long lasting durability
- Premium valve -Premium OPD (overfilling prevention device) valve assembly which is required by law in most states, if your tank doesn't have this, most places won't fill it
- Leading the industry - flame king, a leader in propane storage solutions, prides themselves on making the highest quality, premium, refillable propane tanks on the market, from 1lb up to 100lb tanks, we've got you covered
- Suit your needs - with a standard-size connection valve, this large 40 lb tank will connect as easily as smaller tanks, and work with RVs or trailers, propane tank attachable heaters, and other accessories
Whether you need to eat, power or grill, Flame King specializes in making propane tanks and cylinders used daily across the globe. The Flame King 30 lbs. propane tank is manufactured with durable powder coat paint that prevents rusting and comfortable handles in the collar make for easier lifting. These cylinders are manufactured to Department of Transportation (DOT) and Transport Canada (TC) specifications.
- High grade steel welded construction
- Premium OPD valve assembly
- X-ray and hydrostatic tested
- Powder coated for long lasting exterior protection
- DOT approved
- Tank arrives empty, pre-vacuum purged and ready to be filled with propane
- Comfortable hand-holds in the collar for easier lifting
- Lasts 50% longer than standard BBQ tank
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Whether you need to eat, power or grill, Flame King specializes in making propane tanks and cylinders used daily across the globe. The Flame King 100 lbs. propane tank is manufactured with durable powder-coated paint that prevents rusting and comfortable handles in the collar make for easier lifting. These cylinders are manufactured to Department of Transportation (DOT) and Transport Canada (TC) specifications.
- High grade steel welded propane cylinder
- POL valve assembly
- X-ray and hydrostatic tested
- Powder coated for long lasting exterior protection
- Tank arrives empty, pre-vacuum purged and ready to be filled with propane
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 30 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 30 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4.7"
- Installed on LP gas motor fuel lines for lift truck systems
- Provides a quick closing coupling in the fuel line
- Couplings have an internal check valve that opens by attaching the two units
- 3/8" FNPT Inlet
- 1-1/4"M Acme
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Straight
- Installed on LP gas motor fuel lines for forklift systems up to 100 lb. gas capacity
- One-piece hot forged brass construction
- Internal guiding to prevent being jammed
- Tamper-proof stem
- DOT container type
- 3/4" MNPT container connection
- 375 PSIG discharge setting
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Durable construction and designed for lightweight strength. Rust-free and corrosion-resistant. Comfortable hand-holds in the collar for easier lifting. Easy and light to handle, increasing delivery efficiency and decreasing lifting injuries.
- Durable construction and designed for lightweight strength
- Rust-free and corrosion-resistant
- Comfortable hand-holds in the collar for easier lifting
- Easy and light to handle, increasing delivery efficiency and decreasing lifting injuries
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 111 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
- Permits ASME tanks to be evacuated when it is necessary to relocate a tank
- Not designed as a full time liquid outlet
- Activated by inserting a Schedule 80 pipe nipple, with suitable shutoff valve, into valve outlet
- 3/4" MNPT container connection, 3/4" FNPT outlet
- 8 GPM UL closing flow
- 1-15/16" wrenching hex
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Flame King 100lb LP Cylinder Multi Valve. Multi-Valve 100lb Tank: Includes A Service Valve, High-Capacity Filler Valve With Integral Back-Check, Pressure Relief Valve (375 Psig ) And A Pol Valve, All In One Single Unit. ON-SITE REFILLING: No need to transport your tank to get refilled! The multi-valve 100lb tank allows you to do on-site refilling of your propane gas without disconnecting your appliances. High-grade steel welded propane cylinder; powder coated for rust prevention and long lasting exterior protection. X-ray and hydrostatic tested and DOT approved. 100lb propane tanks are great for mixed heating systems, home fireplaces, dryers and grills. Mfg #YSN100MLT-1
- Multi-Valve 100lb Tank: Includes A Service Valve, High-Capacity Filler Valve With Integral Back-Check, Pressure Relief Valve (375 Psig ) And A Pol Valve, All In One Single Unit
- ON-SITE REFILLING: No need to transport your tank to get refilled! The multi-valve 100lb tank allows you to do on-site refilling of your propane gas without disconnecting your appliances
- High-grade steel welded propane cylinder; powder coated for rust prevention and long lasting exterior protection
- X-ray and hydrostatic tested and DOT approved
- Double back check construction - soft seated upper back check and metal to metal lower back check
- Allows low flow resistance, prolonging pump and hose life
- One piece body design
- For use in domestic tanks
- 1-3/4"M. Acme line
- 13 gpm filling
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Designed for a range of heating and cooking needs, Steel Propane Cylinders are perfect for everything from residential grills, outdoor heaters and fireplaces, to commercial and industrial cookers and heaters. Engineered for safety and lightweight strength, they feature a weather-resistant finish. Includes a fuel gauge for convenience.
- Ideal for a range of residential, commercial and industrial uses including grilling, cooking and heating
- Includes fuel gauge
- Equipped with an overfill prevention device (OPD)
- Precision engineered design for safety and lightweight strength
- Comfortable hand-holds in the collar for easier lifting
- Rust inhibiting durabond powder coat paint
- Interiors that are clean, dry and scale free
- Durable steel construction
- Empty tank must be filled or exchanged
- Leak resistant design
- Double O-ring stem seal
- Tamper proof design
- Sturdy forged brass handle
- Static seat disc
- Recessed excess flow valve
- Normal application forklifts
- 3/4" MNPT cylinder x 3/8" MNPT outlet
- 2.6 gpm excess flow closing
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Has only the poppet and part of the body outside the tank connection
- Internal guiding to prevent being jammed by foreign material
- Adjustment nut is located on the end of the stem inside the tank to prevent tampering
- Rain caps included
- ASME container
- 250 psig discharge setting
- 1852 Flow Capacity UL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- 100 LB DOT Service Valve, 3/4" NGT, 10.6" Dip Tube
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES