Searched for "40141700"
Its our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece Bi-directional seal and built in stiffener - seal assembly cannot be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
- IAPMO/UPC/IPC Listed
- Material: 2306/2406
- Threaded outlet
- MIP X POLY: 3/4" MIP X 1/2" IPS
- .090" SDR/WALL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Elster Perfection offers a wide variety of â€standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories.
- One piece construction
- No special tools or costly installation equipment
- Zinc plated service head adapter
- Independent gripping and sealing components
- Available in all-flex, stubflex or prebent steel casing configurations
- Includes moisture seal/shear protection fitting
- Outlets/inlets/metric
- Servi-Sert service heads are available separately
- No loose parts to misplace, drop or misorient
- Simple, safe and easy to install
- Excellent protection against corrosion
- The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling.
- Swivel head on Servi-Sert simplifies installations
- Protects underground portion of PE tubing
- Widest variety of sizes and configurations
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Elster Perfection offers a wide variety of standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories
- One piece construction
- No special tools or costly installation equipment
- Zinc plated service head adapter
- Independent gripping and sealing components
- Available in all-flex, stubflex or prebent steel casing configurations
- Includes moisture seal/shear protection fitting
- Outlets/inlets/metric
- Servi-Sert service heads are available separately
- No loose parts to misplace, drop or misorient
- Simple, safe and easy to install
- Excellent protection against corrosion
- The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling
- Swivel head on Servi-Sert simplifies installations
- Protects underground portion of PE tubing
- Widest variety of sizes and configurations
- Stop and go, both ends functional
- Cap can be removed by cutting on dotted line allowing the uncovered end to be stabbed onto a gas line
- 3/4" IPS
- SDR 11
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73°F working temperature
- Temperature range of -65°F to + 250°F
- Not for potable water
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
- Self-Flaring, No Special Tools Needed
- Solid Brass Fitting with Stainless Steel Insert
- Includes Split Ring
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Ideal replacement for old or damaged 90° street elbow
- Made from high-grade brass to enable long-term use
- Suitable for MIP x FIP connections
- Lead-free elbow ensures reliable functioning
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 1/2" MIP x 1/2" CTS
- 36"L
- .090" WALL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Pressure switch allows for convenient use
- Pressure gauge displays precise readings from 0 to 100 PSI
- Made from lead-free materials for lasting durability
- Designed to ensure reliable functioning
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
CounterStrike is a patented CSST innovation that is engineered to significantly decrease the potential for lightning induced damage to fuel gas piping systems. The black jacket has energy dissipating properties that will help protect the TracPipe CounterStrike stainless steel pressure liner as well as other fuel gas system components if the CounterStrike becomes energized due to lightning. There are no additional bonding requirements for CounterStrike imposed by the manufacturers installation instructions. With CounterStrike improved properties, TracPipe CounterStrike is to be bonded in accordance with current requirements of the National Electrical Code (NFPA 70) and the National Fuel Gas Code (NFPA 54). TracPipe CounterStrike is listed by CSA to ANSI LC 1. TracPipe CounterStrike meets building code requirements (ASTM E84) with respect to flame spread and smoke density. This permits installation in drop ceilings used as return air plenums and is UL Listed for 1,2 and 4 hour through penetration firestop systems without removal of the jacket.
- Counterstrike
- TracPipe
- Flange
- Fitting
- Pipe and tubing product type: CSST
- Material: brass
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
CounterStrike is a patented CSST innovation that is engineered to significantly decrease the potential for lightning induced damage to fuel gas piping systems. The black jacket has energy dissipating properties that will help protect the TracPipe CounterStrike stainless steel pressure liner as well as other fuel gas system components if the CounterStrike becomes energized due to lightning. There are no additional bonding requirements for CounterStrike imposed by the manufacturers installation instructions. With CounterStrike improved properties, TracPipe CounterStrike is to be bonded in accordance with current requirements of the National Electrical Code (NFPA 70) and the National Fuel Gas Code (NFPA 54). TracPipe CounterStrike is listed by CSA to ANSI LC 1. TracPipe CounterStrike meets building code requirements (ASTM E84) with respect to flame spread and smoke density. This permits installation in drop ceilings used as return air plenums and is UL Listed for 1,2 and 4 hour through penetration firestop systems without removal of the jacket.
- Counterstrike
- TracPipe
- Fitting
- Flange
- Pipe and tubing product type: CSST
- Material: brass
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65°F to +250°F
- Maximum pressure based on 73°F working temperature
- Not for potable water
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73 degree F working temperature
- Temperature range -65 degree F to +250 degree F
Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73 working temperature
- Temperature range of minus 65°F plus 250°F
- Not for potable water
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of minus 65°F plus 250°F
- Maximum pressure based on 73°F working temperature
- Not for potable water
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 125 psi
- Do not over-tighten
- 1-year warranty against defect
- Leaded
- Brass