Its our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly cannot be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
• IAPMO/UPC/IPC Listed

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65° F to +250° F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65° F to +250° F
• Maximum pressure based on 73° F working temperature
• Not for potable water

• Self-Flaring Fitting, No Flaring Tool Needed
• Solid Brass Fitting, Stainless Steel Insert
• Includes Split Ring
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Double-strength glass withstands impact
• Sleek design ensures clear, bright, and distortion-free visibility
• Breaks into larger pieces with duller edges to avoid any potential injury
• Suitable for storm doors, patio doors, entry doors, sliding doors, garages, and more

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 1/2 in. CTS, SDR 7 x 96 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73 working temperature
• Temperature range -65° F to +250° F
• Not for potable water

Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73° F working temperature
• Temperature range of -65° F to +250° F
• Not for potable water

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73 working temperature
• Temperature range -65° F to +250° F
• Not for potable water

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

The striker plate is specially hardened to resist penetration from screws and pneumatic nail guns. They protect Tracpipe from being punctured. The striker plate must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.

• Protects pipes from being punctured
• 3 in. x 7 in.
• Constructed from hardened steel
• Half striker plate

• Self-Flaring Fitting, No Flaring Tool Needed
• Solid Brass Fitting, Stainless Steel Insert
• Includes Split Rings
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Power rated at 9 volt to deliver optimal performance
• 85Db alarm alerts effectively
• Low profile design provides ease of installation
• UL listed for safety and reliability

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. with the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly cannot be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
• IAPMO/UPC/IPC Listed

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of minus 65°F plus 250°F
• Maximum pressure based on 73°F working temperature
• Not for potable water

• Material: 2306/2406
• Threaded outlet
• MIP X POLY: 3/4" MIP X 1/2" IPS
• .090" SDR/WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65°F to +250°F
• Maximum pressure based on 73°F working temperature
• Not for potable water

• 1/2" CTS
• 0.090" SDR/WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Chicago Fittings X-Riser Seal and Ferrule Assembly It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 125 psi
• Do not over-tighten
• 1-year warranty against defect
• Leaded
• Brass

• Self-Flaring, No Special Tools Needed
• Solid Brass Fitting, Stainless Steel Insert
• Includes Split Ring
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Threaded to ensure a secure fit
• Pressure rated at 150 PSI to deliver reliable performance
• Made from sturdy iron to provide durability
• Compatible with schedule 40 pipe and pipe nipples

• 1/2" CTS
• 0.090" wall
• 3/8" OD copper size
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic, and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to 250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

CounterStrike is a patented CSST innovation that is engineered to significantly decrease the potential for lightning induced damage to fuel gas piping systems. The black jacket has energy dissipating properties that will help protect the TracPipe CounterStrike stainless steel pressure liner as well as other fuel gas system components if the CounterStrike becomes energized due to lightning. There are no additional bonding requirements for CounterStrike imposed by the manufacturers installation instructions. With CounterStrike improved properties, TracPipe CounterStrike is to be bonded in accordance with current requirements of the National Electrical Code (NFPA 70) and the National Fuel Gas Code (NFPA 54). TracPipe CounterStrike is listed by CSA to ANSI LC 1. TracPipe CounterStrike meets building code requirements (ASTM E84) with respect to flame spread and smoke density. This permits installation in drop ceilings used as return air plenums and is UL Listed for 1,2 and 4 hour through penetration firestop systems without removal of the jacket.

• Counterstrike
• TracPipe
• Fitting
• Flange
• Pipe and tubing product type: CSST
• Material: brass

CounterStrike is a patented CSST innovation that is engineered to significantly decrease the potential for lightning induced damage to fuel gas piping systems. The black jacket has energy dissipating properties that will help protect the TracPipe CounterStrike stainless steel pressure liner as well as other fuel gas system components if the CounterStrike becomes energized due to lightning. There are no additional bonding requirements for CounterStrike imposed by the manufacturers installation instructions. With CounterStrike improved properties, TracPipe CounterStrike is to be bonded in accordance with current requirements of the National Electrical Code (NFPA 70) and the National Fuel Gas Code (NFPA 54). TracPipe CounterStrike is listed by CSA to ANSI LC 1. TracPipe CounterStrike meets building code requirements (ASTM E84) with respect to flame spread and smoke density. This permits installation in drop ceilings used as return air plenums and is UL Listed for 1,2 and 4 hour through penetration firestop systems without removal of the jacket.

• Counterstrike
• TracPipe
• Flange
• Fitting
• Pipe and tubing product type: CSST
• Material: brass

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

• Self-Flaring, No Special Tools Needed
• Solid Brass Fitting with Stainless Steel Insert
• Includes Split Ring
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Features sharp teeth for fast, efficient cutting
• Made of matrix II bi-metal for enhanced durability
• Double-relief angle allows for general-purpose cutting
• Sawzall blades suitable for the toughest applications

• Self-Flaring Fitting, No Flaring Tool Needed
• Solid Brass Fitting, Stainless Steel Insert
• Includes Split Rings
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Designed for use with medium-weight doors
• Made of high-quality steel with plated finish for durability
• Measures 4.5 in. H x 4.5 in. W
• Comes in a pack of 3 for versatile use

• Constructed From Tracpipe Autoflare Fittings
• Self-Flaring
• Assembles Without Special Tools
• Use with Tracpipe Ps-Ii Tubing
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Ideal replacement for old or damaged 90° street elbow
• High-quality brass construction enables lasting use
• Suitable for MIP x FIP connections
• Lead-free elbow ensures reliable functioning

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73 working temperature
• Temperature range -65° F to +250° F
• Not for potable water

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73°F working temperature
• Temperature range of -65°F to + 250°F
• Not for potable water

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65°F to +250°F
• Maximum pressure based on 73°F working temperature
• Not for potable water

• Stop and go, both ends functional
• Cap can be removed by cutting on dotted line allowing the uncovered end to be stabbed onto a gas line
• 1/2" CTS
• 0.090" SDR/WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

This self-flaring fitting does not require a flaring tool. It includes a split ring. It must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.

• Autoflare fitting
• 3/4 in.
• Solid brass fitting
• Stainless steel insert

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65° F to +250° F
• Maximum pressure based on 73° F working temperature
• Not for potable water

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

• 1" x 12 yards
• For use with CounterStrike piping
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Self-flaring design ensures versatile use
• Metal-to-metal seal for durable and reliable operations
• Features 33% more sealing surface than contemporaries
• Ideal replacement for a damaged or worn-out autoflare 1/2 in. fitting coupling