Champion Power Equipment 100375 Synthetic Rope Aluminum Hawse Fairlead is designed for 8000 lbs. to 12,000 lbs. or less Truck/SUV win. as well as 12-Volt DC win. of the same size. Although synthetic rope is extremely strong and lightweight, it can still be damaged or even experience breakage when used with a standard roller fairlead. Precisely machined and smooth, this aluminum hawse fairlead is designed to be used exclusively with synthetic winch rope to prevent damage and maximize the life of the rope. With a standard 10 in. (254 mm) bolt pattern, this dependable fairlead has a full black anodized finish with a laser-etched logo. For use with synthetic rope only. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.

• Smooth - this hawse fairlead is precisely machined and smooth, with a full black anodized finish and a laser-etched logo
• Exclusive - designed for exclusive use with synthetic winch rope to prevent damage and maximize the life of the rope
• Bolt Pattern - a standard 10 in. (254 mm) bolt pattern
• Versatile - use this aluminum hawse fairlead with 8000 lbs. to 12,000 lbs. Champion Truck/SUV win or other 12-Volt DC win of the same size
• Reliable - Champion will back up your purchase with a 1-year limited warranty

Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord stays flexible even in subzero temperatures
• Molded ends provide greater reliability
• Male plug connects to generator and female end connects to power inlet box/transfer switch
• UL Listed

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Recommended for use in colder climates. This pad warmer rests under the battery.

• Not necessary for use with AGM-style batteries
• Remove old components before installing the new
• When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
• Also consider pairing with model 7102 oil heater cold weather accessory

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.

• Air and oil filters
• 6 spark plugs
• Reminder sticker
• Pre-cleaner
• Oil funnel
• Chamois
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.

• Use to perform complete maintenance on a Generac EcoGen air-cooled generator
• For use on a 6 kW, 530 cc generator
• Maintenance is recommended at every 200-hours of use or 2-years of ownership
• Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
• Oil not included

Scheduled maintenance is a necessity for all standby generators. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

• Air and oil filters included
• 2 spark plugs included
• Reminder sticker included
• Oil funnel included
• Chamois included
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

The automatically controlled thermostat in the Generac Cold Weather Kit for Generac 3. 0 l, 4. 6 l, 5. 4 l and 6. 8 l Direct Drive Units activates the battery warmer when temperatures fall below an acceptable level. Helps your generator maintain an ideal battery temperature. The kit is made for use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6 l and 6. 8 l engines.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below freezing
• Thermostat activates the battery warmer when temperatures fall below an acceptable level
• For use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6. 5. 4 l and 6. 8 l engines
• Includes a battery warmer with an automatically controlled thermostat
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

• Use to perform a complete maintenance on Generac air cooled generator
• For use with 7 kW, 410cc generator
• Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
• Oil must be purchased separately based upon manufacturer recommendations listed below

• Duromax 25 ft. 50 Amp 6Ga 14-50 CS6364 Portable Generator, Black
• The DuroMax XP5025GC is our robust 50-amp 25 ft 6-gauge heavy duty 14-50 generator power cord for home backup.
• This generator power cord features a 100% copper wire for better power quality.
• Ideal for Home Power Backup
• Heavy Duty Construction
• MFG# XP5025GC

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below 30 degree F
• For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
• Includes a battery warmer with an automatically controlled thermostat

The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.

• 30 Amp, NEMA L14-30
• Raintight design even when the generator cord is connected
• NEMA 3R enclosure is rated for indoor or outdoor installation
• UL Listed

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

• Compatible with all Generac 22-150 kW liquid-cooled models
• NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
• Heavy-duty Generac contactor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• 5 year limited warranty

The alarm panel alerts the fuel fill operator when the tank reaches a 90% fill level by sounding an audible alarm and triggering an LED warning light. The panel mounts within the fuel fill and vents area of the generator enclosure and is housed in a NEMA 3R powder painted, steel enclosure. All mounting hardware and connection wire is included.

• Compatible with protector series diesel generators
• NEMA 3 indoor/outdoor rated
• Installation hardware included
• Easy installation

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. Perform a complete maintenance on your Generic liquid-cooled generator with the Generac Liquid-Cooled Generator Scheduled Maintenance Kit. This kit is compatible with 2.4 l, 36 kW and 60 kW generators.

• Use to perform a complete maintenance on Generac liquid-cooled generators
• Designed for use with 2.4 l 36 kW and 60 kW generators
• Includes air filter, oil filter, 4 spark plugs, a spark plug wrench, oil funnel, chamois and reminder sticker
• Oil not included
• Oil funnel, chamois and reminder sticker included

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Made with braided stainless steel
• Fire proof
• Easy installation

Designed for use with manual transfer switches and power inlet boxes, these heavy duty power cords connect a portable generator to the power inlet box and/or transfer switch. It includes male and female 4-wire twist-lock ends. The male plug goes to the generator and the female connects to transfer switch or power inlet box.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord remains flexible even in subzero temperatures
• Plug connects to generator and receptacle connects to power inlet box and transfer switch
• For use with generators equipped with 50 Amp outlets

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are Designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

• Duromax 15 ft. 50 Amp 6Ga 14-50 CS6364 Portable Generator, Black
• DuroMax XP5015GC is our robust 50-amp 15 ft 6-gauge heavy duty 14-50 generator power cord for home backup.
• 100% copper wire for better power quality
• STW jacket rating for durability, grounded plugs for safe operation
• perfect for home power backup and is outdoor rated for safe use
• Ideal for Home Power Backup
• MFG# XP5015GC

The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection. This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. It is important to note that it is recommended that an Authorized Dealer install the Extreme Cold Weather Kit as improper installation procedures can inhibit proper generator function.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines. The block heater works in conjunction with a battery warmer to provide quick starting capability. For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators. The heater works in conjunction with a battery warmer to provide quick starting capability. Includes a block heater, step-by-step installation instructions.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 50 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation