• Generac 0H3421S 12V Group 26R wet cell battery
• Your account will automatically be created with Continental Battery Systems
• Continental Battery Systems handle the following directly: › Weekly Delivery › Swap replacement on all warranty batteries › Core Return
• $5-$40 each for returned cores, depending on battery size
• Checks sent directly to the dealer by Continental Battery Systems
• For additional information, contact your local Continental Battery Systems branch or Continental Battery Systems Customer Service at 1-800-782-7848
• MFG# 0H3421S

Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord stays flexible even in subzero temperatures
• Molded ends provide greater reliability
• Male plug connects to generator and female end connects to power inlet box/transfer switch
• UL Listed

Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

• Compatible with all Generac 22-150 kW liquid-cooled models
• NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
• Heavy-duty Generac contactor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• 5 year limited warranty

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

• Use to perform a complete maintenance on Generac air cooled generator
• For use with 7 kW, 410cc generator
• Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
• Oil must be purchased separately based upon manufacturer recommendations listed below

The alarm panel alerts the fuel fill operator when the tank reaches a 90% fill level by sounding an audible alarm and triggering an LED warning light. The panel mounts within the fuel fill and vents area of the generator enclosure and is housed in a NEMA 3R powder painted, steel enclosure. All mounting hardware and connection wire is included.

• Compatible with protector series diesel generators
• NEMA 3 indoor/outdoor rated
• Installation hardware included
• Easy installation

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• Service entrance rated 100 Amp 120/208-Volt 3 phase automatic transfer switch
• 5 year limited warranty

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.

• Air and oil filters
• 6 spark plugs
• Reminder sticker
• Pre-cleaner
• Oil funnel
• Chamois
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

• Duromax 15 ft. 50 Amp 6Ga 14-50 CS6364 Portable Generator, Black
• DuroMax XP5015GC is our robust 50-amp 15 ft 6-gauge heavy duty 14-50 generator power cord for home backup.
• 100% copper wire for better power quality
• STW jacket rating for durability, grounded plugs for safe operation
• perfect for home power backup and is outdoor rated for safe use
• Ideal for Home Power Backup
• MFG# XP5015GC

The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below 30 degree F
• For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
• Includes a battery warmer with an automatically controlled thermostat

The Generac Maintenance Kit for Portable Generators makes it easy to perform routine maintenance on your portable generator to achieve top performance. The kit includes air and oil filters, a chamois and other necessary tools. This kit is designed for a 992 cc engine.

• Helps you extend the life and maintain the performance of your portable generator
• Includes air and oil filters
• Includes a spark plug
• Includes an oil funnel, stabil sample and chamois
• Oil funnel
• Chamois
• Stabil sample
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Made with braided stainless steel
• Fire proof
• Easy installation

The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.

• Tune-up kit keeps your generator running at optimum performance
• Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
• Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
• Oil must be purchased separately, short description

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 50 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductor, 6-Gauge wire with 50 Amp male (1450) + female (CS6364) ends. Made from UL Listed components.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord stays flexible even in subzero temperatures
• Male plug connects to generator and female end connects to power inlet box/transfer switch
• Made with UL Listed components

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines. The block heater works in conjunction with a battery warmer to provide quick starting capability. For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are Designed to outperform the competition.

• Heavy-duty Duramax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The Generac Extreme Cold Weather Engine Block Heater for Generac Liquid-Cooled Automatic Standby Generators gives an extra degree of weather protection to your Generac 25 kW or 30 kW liquid-cooled automatic standby generator. A block heater, step-by-step installation instructions and the necessary mounting hardware are included. Works in conjunction with a battery warmer to provide quick starting capability.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware

• DuroMax 25 ft. 30 Amp 10-Gauge Portable Generator Heavy Duty Power Cord DuroMax
• The DuroMax XP3025GC is our robust 30-amp 25 ft 10-gauge heavy duty L14-30 generator power cord for home backup
• 100% copper wire for better power quality, an SJT jacket rating for durability
• 30 Amp Generator Cord is perfect for home power backup and is outdoor rated for safe use
• Ideal for Home Power Backup
• MFG# XP3025GC

The Champion Power Equipment 100372 8.5kW Home Standby Generator Maintenance Kit includes everything you need to extend the life and function of your generator. The kit includes a spark plug (F7RTC) and an air filter. Scheduled maintenance is key to extending the life and function of a home standby generator. Proper generator care not only reduces the likelihood of costly repairs but also ensures the generator will be ready to provide power to your home during emergencies. Owning this kit will make it much easier to keep up with scheduled maintenance since you'll have just what you need on hand to keep your home standby generator in top condition. Don't wait until the power is out to discover you forgot to change the oil or replace a spark plug. Peace of mind comes with proper planning. Maintenance is recommended every 2-years or 100-hours of use. Champion recommends that you follow your model's specific maintenance schedule for exact intervals. Service should be sooner if you're operating your generator in high ambient temperatures or a dusty and dirty environment. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Keep your generator ready to power your home during emergencies
• Includes a spark plugs and air filter
• Extend the life of your generator and avoid costly repairs
• Manage your high demand 240-Volt appliances
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

The Generac Scheduled Maintenance Kit for Standby Generators with 1.6 l Engines helps you complete scheduled maintenance on your standby generator. Scheduled maintenance is crucial to keeping your Generac generator running smoothly. The kit included.

• Air and oil filters
• 4 spark plugs
• Reminder sticker
• Oil funnel
• Chamois

The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F (0 degree C). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.

• Compatible with generic 30 kW protector series diesel generators
• Battery warmer: 120-Volt, 75-Watt, 0.63 Amp
• Instructions included
• Easy installation

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The cast iron, lockable fuel cap provides the ability to lock the fuel system. Locking the fuel cap will prevent unwanted fuel tampering or syphoning. The fuel cap is designed specifically for Protector Series Generators.

• Compatible with Generac protector series diesel generators
• Durable Cast Iron
• Fits most pad locks
• Easy to install

Scheduled maintenance is a necessity for all standby generators. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

• Air and oil filters included
• 2 spark plugs included
• Reminder sticker included
• Oil funnel included
• Chamois included
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.

• 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
• Allows the nominal voltage pick up percentage to be increased to 90%
• Allows the nominal drop out, pick up percentage to be increased to 95%
• Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)

The Cold Weather Kits consist of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F.

• When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability
• 120-Volt
• 80-Watt
• 0.67 Amp
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 100 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

• Service rated generac automatic transfer switches are housed in an aluminum nema/ul type 3r enclosure, with electrostatically applied and baked powder paint
• Heavy-duty generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
• Switch is covered by a 5-year limited warranty
• Long lasting beauty

The enclosure is the generator's first line of defense against the elements and it's important to keep it in good condition. Use the paint kit to touch up scratches and other damage to protect from future corrosion. Kits include the necessary paint to properly touch up a generator enclosure.

• Touch up the enclosure of your generator by using the Generac tan generator paint kit for 2007 models
• Use touch up paint to cover scratches and any damages on the enclosure for corrosion protection
• Designed for generators manufactured prior to April of 2008
• Includes 6 oz. spray can and 1/2 oz. touch-up bottle

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators. The heater works in conjunction with a battery warmer to provide quick starting capability. Includes a block heater, step-by-step installation instructions.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The Champion Power Equipment 48036 25 ft. 30 Amp 240-Volt Generator Extension Cord changes your L14-30R locking outlet to four 5-20R household outlets. Whether you're powering your essential items during an emergency or powering up your tools in remote locations, Champion's 25 ft. extension cord can be depended upon in any situation. Designed in a fan-style configuration, this cord includes dust covers to keep your outlets clean and protected when not in use. Ideal for quick and dependable use of power, this 25 ft., high-capacity 10-Gauge wire is surrounded by durable, outdoor-rated insulation (SJTW). Featuring a heat and cold resistant thermoplastic jacket, you can be sure your power cord will remain flexible and function perfectly whether the temperature outside is extremely hot or extremely cold. Champion's convenient extension cord is rated for use with 125-Volt/250-Volt and extends 30 Amp of generator power where you need it. The 25 ft. L cord allows you to run your generator from a safe distance, protecting you and others from noise and hazardous exhaust. Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Converts a 30 Amp locking outlet to four 20 Amp household outlets and extends your power up to 25 ft.
• Service grade, abrasion and weather-resistant insulation, plus the included dust covers keep your outlets clean when not in use
• Cold and heat resistant, 10-Gauge wire stays flexible in extreme temperatures and is rated for 240-Volt use
• Extend your power up to 25 ft. away, protecting you and others from hazardous generator exhaust
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.

• Compatible with generic 50 kW protector series diesel generators
• Made with braided stainless steel
• Fire proof
• Easy installation

• Duromax 25 ft. 50 Amp 6Ga 14-50 CS6364 Portable Generator, Black
• The DuroMax XP5025GC is our robust 50-amp 25 ft 6-gauge heavy duty 14-50 generator power cord for home backup.
• This generator power cord features a 100% copper wire for better power quality.
• Ideal for Home Power Backup
• Heavy Duty Construction
• MFG# XP5025GC

E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emergency. It is field mounted in the generator roof line above the control area for easy access. The E-stop will shut down the Generator without damaging the unit.

• Easy installation
• Resettable push button style
• Field installed

The battery warmer of the Generac Cold Weather Kit for Liquid-Cooled Automatic Standby Generators with 2.4 l Engines activates when temperatures fall below an acceptable levels. Helps your generator maintain great performance. The kit is designed for use with Generac 22 kW, 27 kW, 36 kW, 45 kW and 60 kW air-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Battery warmer activates when temperatures fall below an acceptable level
• Recommended for use in areas where the temperature drops below freezing
• For use with Generac 22 kW, 27 kW, 36 kW, 45 and 60 kW air-cooled automatic standby generators with 2.4 l engines
• Includes a battery warmer with an automatically controlled thermostat built-into the battery wrap
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Used to maintain optimal battery temperature in cold-weather environments. Also consider pairing with model 7101 Battery Warmer cold weather accessory.

• Oil warmer slips directly under the oil filter.
• When installing, it is required that oil be replaced with 5W-30 synthetic
• Remove the old component before installing the new warmer.
• All products come with a 1-year limited warranty

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

The Champion Power Equipment C90011 Weather-Resistant Storage Cover is designed to fit your 2800-Watt to 4750-Watt generator to keep it safe, clean and dry. Whether your generator is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your generator, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your generator and its engine. Champions versatile cover also fits generators up to 25 in. x 23.6 in. x 20.3 in. in size. This cover is not designed to fit over wheels. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your generator and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your generator and prevent scuff marks and scratches. Protect your valuable Champion generator year round with Champions complete selection of generator covers including 1200-Watt to 1875-Watt and 4800-Watt to 1-500 Watt sizes. Buy with confidence Champion Support will back up your purchase with a 1-year limited warranty.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Protect your inverter from sun and UV damage, rain, snow, dirt and more with this covers tough vinyl exterior
• The strong elastic base provides a secure, custom-like fit for your generator
• This cover is designed for 2800-Watt to 4750-Watt generators, but will also fit generators up to 25 in. x 23.6 in. x 20.3 in. in size
• The durable cover fits over your generator quickly to protect it while in storage
• Includes 1-year limited warranty

Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.

• Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
• Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
• Reinforced blades minimize bending of prongs and reduces breakage
• Lighted ends allows the user to confirm when power is supplied to cord
• Heavy-duty PVC jacket resists moisture, abrasion and temperature
• Grounded plugs allows for safe operation

Designed for use with manual transfer switches and power inlet boxes, these heavy duty power cords connect a portable generator to the power inlet box and/or transfer switch. It includes male and female 4-wire twist-lock ends. The male plug goes to the generator and the female connects to transfer switch or power inlet box.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord remains flexible even in subzero temperatures
• Plug connects to generator and receptacle connects to power inlet box and transfer switch
• For use with generators equipped with 50 Amp outlets

Champion Power Equipment 100319 50 Amp RV Ready Parallel Kit is designed to instantly increase your power and save space by linking two 2800-Watt or higher inverter generators. Specifically designed to connect two Champion inverters, this innovative Parallel Kit quickly and seamlessly integrates the two with a simple clip-on connection - no tools necessary. Your receptacles stay in a convenient position giving you easy access to the standard 120-Volt 50 Amp RV (14-50R) and 120-Volt 30 Amp locking outlets (L5-30R). Designed for safety, Champion also includes 30 Amp and 50 Amp circuit breakers to prevent overloads. This RV Ready Parallel Kit gives you the ability to connect with another Champion 2800-Watt or higher inverter for 50 amps of output - enough power to start and run two 15,000 BTU RV air conditioners. Buy with confidence Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Equipped with a standard 50 Amp RV outlet
• Toolless installation seamlessly integrates two 2800-Watt or higher inverters with a quick clip-on connection
• Connecting two generators gives you enough power to start and run two 15,000 BTU RV air conditioners
• 120-Volt 50 Amp RV (14-50R) and 120-Volt 30 Amp locking outlets (L5-30R), plus 30 Amp and 50 Amp circuit breakers to prevent overloads
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

The Generac Maintenance Kit for Portable Generators helps you extend the life and maintain the performance of your generator. The kit's funnel will help you perform successful oil changes. Chamois, Stabile Sample. Sizes GP5000 through GP7500.

• Helps you extend the life and maintain the performance of your generator
• Includes an air filter
• Includes a spark plug
• Includes a stabil sample and chamois
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

• Generac HVAC Energy Manager
• Installation Time Savings: Save 15-30 minutes compared to traditional technologies.
• Installer Friendly: Designed to independently manage up to two residential HVAC systems for Generac Home Standby Generators.
• Cost-Savings: Achieve NEC home backup system sizing compliance while also lowering the total cost of acquisition for homeowners.
• Peace of Mind: Industry leading, unmatched 5-year limited warranty.
• MFG# 7025

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Recommended for use in colder climates. This pad warmer rests under the battery.

• Not necessary for use with AGM-style batteries
• Remove old components before installing the new
• When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
• Also consider pairing with model 7102 oil heater cold weather accessory

The Generac Load Manager 50A is designed to optimize the performance of your generator during power outages by intelligently managing the load. These modules allow you to prioritize which appliances and systems receive power when your generator runs, ensuring essential devices stay powered while preventing overload. Overall you get more coverage with less when you use Generac's power load manager.

• Wire-free technology increased afford ability with wireless modules, lowering installation cost and providing the best whole-house generator option to fit any budget, smart management modules work with any home standby generator for flexibility with any standby solution
• Prioritize loads power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used
• Load management features a lock out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often
• Externally visible LED status view load status without opening the electrical box for convenient management of power during an outage

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Heavy-duty Generac contractor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• 5 year limited warranty

The 5 Gal. spill box screws into the existing fuel fill port of the base tank. It captures and contains fuel if over fueling or spilling occurs during the fill process. Its rugged, weatherproof enclosure is comprised of powder painted steel and pipe. It features a cover latch that can be locked for security.

• Compatible with Protector Series diesel generators
• Steel enclosure
• Lockable cover latch
• Easy to install