Generator Accessories
The Generac Load Manager 50A is designed to optimize the performance of your generator during power outages by intelligently managing the load. These modules allow you to prioritize which appliances and systems receive power when your generator runs, ensuring essential devices stay powered while preventing overload. Overall you get more coverage with less when you use Generac's power load manager.
- Wire-free technology increased afford ability with wireless modules, lowering installation cost and providing the best whole-house generator option to fit any budget, smart management modules work with any home standby generator for flexibility with any standby solution
- Prioritize loads power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used
- Load management features a lock out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often
- Externally visible LED status view load status without opening the electrical box for convenient management of power during an outage
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 200-Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
- Service rated (RXSW) Generac automatic transfer switches are housed in an aluminum NEMA/UL type 3R enclosure, with electrostatically applied and baked powder paint
- Heavy duty Generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
- Switch is covered by a 5-year limited warranty
- Replacement for RTSW200A3
Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Includes all necessary hardware
- Instructions included
- Easy installation
The 5 Gal. spill box screws into the existing fuel fill port of the base tank. It captures and contains fuel if over fueling or spilling occurs during the fill process. Its rugged, weatherproof enclosure is comprised of powder painted steel and pipe. It features a cover latch that can be locked for security.
- Compatible with Protector Series diesel generators
- Steel enclosure
- Lockable cover latch
- Easy to install
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. Perform a complete maintenance on your Generic liquid-cooled generator with the Generac Liquid-Cooled Generator Scheduled Maintenance Kit. This kit is compatible with 2.4 l, 36 kW and 60 kW generators.
- Use to perform a complete maintenance on Generac liquid-cooled generators
- Designed for use with 2.4 l 36 kW and 60 kW generators
- Includes air filter, oil filter, 4 spark plugs, a spark plug wrench, oil funnel, chamois and reminder sticker
- Oil not included
- Oil funnel, chamois and reminder sticker included
The Generac 5719 maintenance kit is designed for the 410 cc engine portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Helps you extend the life and maintain the performance of your portable generator
- Includes air and oil filters
- Includes a spark plug and a spark plug wrench
- Includes an oil funnel, stabil sample and chamois
- Oil funnel
- Chamois
- Stabil sample
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Generator Transport Cart is designed to easily move and position any of the air-cooled generators without the need for additional people or equipment. Large wheels and a wide handle take the strain off transportation. By attaching the cart to the generator, the generator is lifted from the pallet by leverage and is easily wheeled to the appropriate location for final setting. The cart is compatible with any air cooled Generic model.
- Designed to allow a single person to move and position an air-cooled generator
- Large tires and wide handle remove the hassle of moving the generator to the install location
- Generator attaches to cart via lifting holes for security during transport
- Cart is compatible with any air cooled Generac model
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductor, 6-Gauge wire with 50 Amp male (1450) + female (CS6364) ends. Made from UL Listed components.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord stays flexible even in subzero temperatures
- Male plug connects to generator and female end connects to power inlet box/transfer switch
- Made with UL Listed components
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Tune-up kit keeps your generator running at optimum performance
- Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
- Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
- Oil must be purchased separately, short description
This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Recommended for use in colder climates. This pad warmer rests under the battery.
- Not necessary for use with AGM-style batteries
- Remove old components before installing the new
- When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
- Also consider pairing with model 7102 oil heater cold weather accessory
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Refer to the generator owner's manual for more information.
- Kit includes: air filter, oil filter, spark plug and wrench, oil funnel, chamois and reminder sticker
- Maintenance is recommended at every 200-hours or 2-years
- Scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met
- Running in a dusty environment, more frequent maintenance may be required, maintenance intervals may differ per model
The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.
- 30 Amp, NEMA L14-30
- Raintight design even when the generator cord is connected
- NEMA 3R enclosure is rated for indoor or outdoor installation
- UL Listed
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
The Champion Power Equipment 48036 25 ft. 30 Amp 240-Volt Generator Extension Cord changes your L14-30R locking outlet to four 5-20R household outlets. Whether you're powering your essential items during an emergency or powering up your tools in remote locations, Champion's 25 ft. extension cord can be depended upon in any situation. Designed in a fan-style configuration, this cord includes dust covers to keep your outlets clean and protected when not in use. Ideal for quick and dependable use of power, this 25 ft., high-capacity 10-Gauge wire is surrounded by durable, outdoor-rated insulation (SJTW). Featuring a heat and cold resistant thermoplastic jacket, you can be sure your power cord will remain flexible and function perfectly whether the temperature outside is extremely hot or extremely cold. Champion's convenient extension cord is rated for use with 125-Volt/250-Volt and extends 30 Amp of generator power where you need it. The 25 ft. L cord allows you to run your generator from a safe distance, protecting you and others from noise and hazardous exhaust. Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.
- Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
- Converts a 30 Amp locking outlet to four 20 Amp household outlets and extends your power up to 25 ft.
- Service grade, abrasion and weather-resistant insulation, plus the included dust covers keep your outlets clean when not in use
- Cold and heat resistant, 10-Gauge wire stays flexible in extreme temperatures and is rated for 240-Volt use
- Extend your power up to 25 ft. away, protecting you and others from hazardous generator exhaust
- Includes 1-year limited warranty with free lifetime technical support from dedicated experts
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. The scheduled maintenance kit offers all the hardware necessary to perform complete maintenance on your Centurion liquid-cooled standby generator. The Generac Scheduled Maintenance Kit for Generac Liquid-Cooled Generators with 4.2 l Engines includes.
- Air and oil filters
- 6 spark plugs
- Reminder sticker
- Pre-cleaner
- Oil funnel
- Chamois
The Breather warmer is only for use in extreme cold weather applications where heavy icing occurs. For use on Generac Air Cooled units manufactured 2013 to present, not all Air cooled units. Also consider model 7101 Battery warmer and 7102 oil warmer cold weather accessories (compatible on both 50 Hz or 60 Hz units).
- Only compatible on 60 Hz units
- When installing any cold weather item, it is required that the oil be replaced with 5W-30 synthetic
- Remove the old component before installing the new
- All products come with a 1-year limited warranty
Champion Power Equipment 100319 50 Amp RV Ready Parallel Kit is designed to instantly increase your power and save space by linking two 2800-Watt or higher inverter generators. Specifically designed to connect two Champion inverters, this innovative Parallel Kit quickly and seamlessly integrates the two with a simple clip-on connection - no tools necessary. Your receptacles stay in a convenient position giving you easy access to the standard 120-Volt 50 Amp RV (14-50R) and 120-Volt 30 Amp locking outlets (L5-30R). Designed for safety, Champion also includes 30 Amp and 50 Amp circuit breakers to prevent overloads. This RV Ready Parallel Kit gives you the ability to connect with another Champion 2800-Watt or higher inverter for 50 amps of output - enough power to start and run two 15,000 BTU RV air conditioners. Buy with confidence Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.
- Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
- Equipped with a standard 50 Amp RV outlet
- Toolless installation seamlessly integrates two 2800-Watt or higher inverters with a quick clip-on connection
- Connecting two generators gives you enough power to start and run two 15,000 BTU RV air conditioners
- 120-Volt 50 Amp RV (14-50R) and 120-Volt 30 Amp locking outlets (L5-30R), plus 30 Amp and 50 Amp circuit breakers to prevent overloads
- Includes 1-year limited warranty with free lifetime technical support from dedicated experts
The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection. This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. It is important to note that it is recommended that an Authorized Dealer install the Extreme Cold Weather Kit as improper installation procedures can inhibit proper generator function.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.
- Use to perform complete maintenance on a Generac EcoGen air-cooled generator
- For use on a 6 kW, 530 cc generator
- Maintenance is recommended at every 200-hours of use or 2-years of ownership
- Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
- Oil not included
The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below 30 degree F
- For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
- Includes a battery warmer with an automatically controlled thermostat
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.
- 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
- Allows the nominal voltage pick up percentage to be increased to 90%
- Allows the nominal drop out, pick up percentage to be increased to 95%
- Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Air and oil filters
- 4 spark plugs
- Reminder sticker
- Oil funnel
- Chamois
- Click on the more info" tab to download the specifications pdf to view the wattage requirement guide
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are Designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
The spill box drain back kit allows fuel that was captured in the 5 Gal. spill box to be drained directly back into the fuel tank to avoid vapors. This kit is only used in conjunction with the 5 Gal. spill box. It is not used independently.
- Compatible with protector series diesel generators
- Includes all needed hardware
- Instructions included
- Easy to install
The Cold Weather Kits consist of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F.
- When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability
- 120-Volt
- 80-Watt
- 0.67 Amp
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
The Generac Maintenance Kit for Portable Generators helps you extend the life and maintain the performance of your generator. The kit's funnel will help you perform successful oil changes. Chamois, Stabile Sample. Sizes GP5000 through GP7500.
- Helps you extend the life and maintain the performance of your generator
- Includes an air filter
- Includes a spark plug
- Includes a stabil sample and chamois
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.
- Compatible with Generac 50 kW protector series diesel generators
- Includes all necessary hardware
- Instructions included
- Easy installation
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with generic 50 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
The enclosure is the generator's first line of defense against the elements and is important to keep in good condition. If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. These paint kits include the necessary paint to properly maintain or touch up a generator enclosure. This paint kit is designed for the 2007 model lineup to help ensure corrosion resistance.
- Use to touch up scratches on a generator enclosure
- Compatible with generators manufactured prior to April of 2008
- Helps provide corrosion protection
- Includes 6 oz. spray can and 0.5 oz. touch-up bottle
Scheduled maintenance is a necessity for all standby generators. The Liquid-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac liquid-cooled generators. Oil and coolant will need to be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Air and oil filters included
- 10 spark plugs included
- Reminder stickers included
- Pre-cleaner included
- Oil funnel included
- Chamois included
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Champion Power Equipment C90015 Weather-Resistant Storage Cover is designed to fit your 1200-Watt to 1875-Watt generator to keep it safe, clean and dry. Whether your generator is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your generator, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your generator and its engine. Champions versatile cover also fits generators up to 18.9 in. x 15.8 in. x 14.2 in. in size. This cover is not designed to fit over wheels. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your generator and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your generator and prevent scuff marks and scratches. Protect your valuable Champion generator year round with Champions complete selection of generator covers including 2800-Watt to 4750-Watt and 4800-Watt to 11,500-Watt sizes. Buy with confidence Champion Support will back up your purchase with a 1-year limited warranty.
- Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
- Protect your generator from sun and UV damage, rain, snow, dirt and more with this covers tough vinyl exterior
- The strong elastic base provides a secure, custom-like fit for your generator
- This cover is designed for 1200-Watt to 1875-Watt generators, but will also fit generators up to 18.9 in. x 15.8 in. x 14.2 in. in size
- The durable cover fits over your generator quickly to protect it while in storage
- Includes 1-year limited warranty with free lifetime technical support from dedicated experts
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. The Generac 4.6 l 80 kW Liquid-Cooled Generator Scheduled Maintenance Kit comes with an oil filter, an air filter, pre-cleaner, 8 spark plugs, a spark plug wrench, an oil funnel, a chamois and a reminder sticker.
- Use to perform a complete maintenance on Generac liquid-cooled generators
- Compatible with 4.6 l 80 kW units
- Designed for generators produced August 2010 or later
- Includes oil filter, air filter, pre-cleaner, 8 spark plugs, spark plug wrench, oil funnel, chamois and reminder sticker
- Oil funnel, chamois and reminder sticker included
The Champion Power Equipment 100372 8.5kW Home Standby Generator Maintenance Kit includes everything you need to extend the life and function of your generator. The kit includes a spark plug (F7RTC) and an air filter. Scheduled maintenance is key to extending the life and function of a home standby generator. Proper generator care not only reduces the likelihood of costly repairs but also ensures the generator will be ready to provide power to your home during emergencies. Owning this kit will make it much easier to keep up with scheduled maintenance since you'll have just what you need on hand to keep your home standby generator in top condition. Don't wait until the power is out to discover you forgot to change the oil or replace a spark plug. Peace of mind comes with proper planning. Maintenance is recommended every 2-years or 100-hours of use. Champion recommends that you follow your model's specific maintenance schedule for exact intervals. Service should be sooner if you're operating your generator in high ambient temperatures or a dusty and dirty environment. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.
- Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
- Keep your generator ready to power your home during emergencies
- Includes a spark plugs and air filter
- Extend the life of your generator and avoid costly repairs
- Manage your high demand 240-Volt appliances
- Includes 1-year limited warranty with free lifetime technical support from dedicated experts
The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators. Oil will need to be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Includes: 1 air filter 1 oil filter 1 AVR Filter (2) spark plug 1 oil funnel 1 chamois 1 reminder sticker
- Designed for the 20 kW Synergy and 15 kW EcoGen standby generators (999 cc engine)
- Keeps your generator running at optimum performance
- Oil not included
Scheduled maintenance is a necessity for all standby generators. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Air and oil filters included
- 2 spark plugs included
- Reminder sticker included
- Oil funnel included
- Chamois included
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.
- 30 Amp, NEMA L14-30
- Raintight design even when the generator cord is connected
- NEMA 3R enclosure is rated for indoor or outdoor installation
- UL Listed
Duromax Power Cord presents a high-quality alternative to other extension cords by utilizing heavy-duty connectors and construction to provide safer use for the user. It is UL Rated for safe operation and true rated power allowing it to handle everything from home appliances to outdoor power equipment. This Duromax Power Cord features lighted ends for easy hookup of power and to know when the cord is plugged in to the power source. The power cords heavy-duty durable jacket insulates and protects the cord against job-site use while resisting moisture, abrasion and harmful UV rays. Great for plugging into Generators, power tools and even around the house, Duromax Power Cords are designed to outperform the competition.
- Heavy-duty Duromax power cord is outdoor rated for safe use on the jobsite or in the yard
- Bright yellow jacket allows for high-visibility to help prevent accidental cutting and damage
- Reinforced blades minimize bending of prongs and reduces breakage
- Lighted ends allows the user to confirm when power is supplied to cord
- Heavy-duty PVC jacket resists moisture, abrasion and temperature
- Grounded plugs allows for safe operation
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- Service entrance rated 100 Amp 120/208-Volt 3 phase automatic transfer switch
- 5 year limited warranty
The Cold Weather Kit consists of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 F. When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below 32 degree F
- For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
- Includes a battery warmer with an automatically controlled thermostat
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators installs easily with the included mounting hardware. The heater keeps your Generac automatic standby generator performing even in harsh weather conditions. The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.
- Important to note that it is recommended that an authorized dealer install the extreme cold weather kit as improper installation procedures can inhibit proper generator function
- Kit is to be used in conjunction with the appropriate cold weather kit that contains the necessary battery warmer assembly, if not done already, the oil must be replaced with the appropriate synthetic oil
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 70 kW and 150 kW liquid-cooled automatic standby generators with 6.8 l engines
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emergency. It is field mounted in the generator roof line above the control area for easy access. The E-stop will shut down the Generator without damaging the unit.
- Easy installation
- Resettable push button style
- Field installed
The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F (0 degree C). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Compatible with generic 30 kW protector series diesel generators
- Battery warmer: 120-Volt, 75-Watt, 0.63 Amp
- Instructions included
- Easy installation