The Generac Load Manager 50A is designed to optimize the performance of your generator during power outages by intelligently managing the load. These modules allow you to prioritize which appliances and systems receive power when your generator runs, ensuring essential devices stay powered while preventing overload. Overall you get more coverage with less when you use Generac's power load manager.

• Wire-free technology increased afford ability with wireless modules, lowering installation cost and providing the best whole-house generator option to fit any budget, smart management modules work with any home standby generator for flexibility with any standby solution
• Prioritize loads power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used
• Load management features a lock out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often
• Externally visible LED status view load status without opening the electrical box for convenient management of power during an outage

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Used to maintain optimal battery temperature in cold-weather environments. Also consider pairing with model 7101 Battery Warmer cold weather accessory.

• Oil warmer slips directly under the oil filter
• When installing, it is required that oil be replaced with 5W-30 synthetic
• Remove the old component before installing the new
• All products come with a 1-year limited warranty

This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Recommended for use in colder climates. This pad warmer rests under the battery.

• Not necessary for use with AGM-style batteries
• Remove old components before installing the new
• When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
• Also consider pairing with model 7102 oil heater cold weather accessory

The Breather warmer is only for use in extreme cold weather applications where heavy icing occurs. For use on Generac Air Cooled units manufactured 2013 to present, not all Air cooled units. Also consider model 7101 Battery warmer and 7102 oil warmer cold weather accessories (compatible on both 50 Hz or 60 Hz units).

• Only compatible on 60 Hz units
• When installing any cold weather item, it is required that the oil be replaced with 5W-30 synthetic
• Remove the old component before installing the new
• All products come with a 1-year limited warranty

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 200-Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

• Service rated (RXSW) Generac automatic transfer switches are housed in an aluminum NEMA/UL type 3R enclosure, with electrostatically applied and baked powder paint
• Heavy duty Generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
• Switch is covered by a 5-year limited warranty
• Replacement for RTSW200A3

The battery warmer of the Generac Cold Weather Kit for Liquid-Cooled Automatic Standby Generators with 2.4 l Engines activates when temperatures fall below an acceptable levels. Helps your generator maintain great performance. The kit is designed for use with Generac 22 kW, 27 kW, 36 kW, 45 kW and 60 kW air-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Battery warmer activates when temperatures fall below an acceptable level
• Recommended for use in areas where the temperature drops below freezing
• For use with Generac 22 kW, 27 kW, 36 kW, 45 and 60 kW air-cooled automatic standby generators with 2.4 l engines
• Includes a battery warmer with an automatically controlled thermostat built-into the battery wrap
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators helps keep your Generac liquid-cooled automatic standby generator performing even in harsh weather conditions. The heater works in conjunction with a battery warmer to provide quick starting capability. Includes a block heater, step-by-step installation instructions.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 22 kW, 27 kW, 36 kW, 45 and 60 kW liquid-cooled automatic standby generators
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware
• Provide an extra degree of weather protection
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. The Generac 4.6 l 80 kW Liquid-Cooled Generator Scheduled Maintenance Kit comes with an oil filter, an air filter, pre-cleaner, 8 spark plugs, a spark plug wrench, an oil funnel, a chamois and a reminder sticker.

• Use to perform a complete maintenance on Generac liquid-cooled generators
• Compatible with 4.6 l 80 kW units
• Designed for generators produced August 2010 or later
• Includes oil filter, air filter, pre-cleaner, 8 spark plugs, spark plug wrench, oil funnel, chamois and reminder sticker
• Oil funnel, chamois and reminder sticker included

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. Perform a complete maintenance on your Generic liquid-cooled generator with the Generac Liquid-Cooled Generator Scheduled Maintenance Kit. This kit is compatible with 2.4 l, 36 kW and 60 kW generators.

• Use to perform a complete maintenance on Generac liquid-cooled generators
• Designed for use with 2.4 l 36 kW and 60 kW generators
• Includes air filter, oil filter, 4 spark plugs, a spark plug wrench, oil funnel, chamois and reminder sticker
• Oil not included
• Oil funnel, chamois and reminder sticker included

The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 4.2 l Engines consists of a battery warmer with an automatically controlled thermostat built-into the battery wrap. The kit helps your generator maintain an ideal battery temperature for quick startup. For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators with 4.2 l engines.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below freezing
• For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators with 4.2 l engines
• Includes a battery warmer with an automatically controlled thermostat

The 5 Gal. spill box screws into the existing fuel fill port of the base tank. It captures and contains fuel if over fueling or spilling occurs during the fill process. Its rugged, weatherproof enclosure is comprised of powder painted steel and pipe. It features a cover latch that can be locked for security.

• Compatible with Protector Series diesel generators
• Steel enclosure
• Lockable cover latch
• Easy to install

The enclosure is the generator's first line of defense against the elements and is important to keep in good condition. If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. These paint kits include the necessary paint to properly maintain or touch up a generator enclosure.

• Paint kit for 2008 Generac air-cooled generator model line up
• Paint color is gray
• Kit includes touch up bottle, touch up spray can and towel
• Please check with your sales representative to verify proper color coordination

The alarm panel alerts the fuel fill operator when the tank reaches a 90% fill level by sounding an audible alarm and triggering an LED warning light. The panel mounts within the fuel fill and vents area of the generator enclosure and is housed in a NEMA 3R powder painted, steel enclosure. All mounting hardware and connection wire is included.

• Compatible with protector series diesel generators
• NEMA 3 indoor/outdoor rated
• Installation hardware included
• Easy installation

Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

• Compatible with all Generac 22-150 kW liquid-cooled models
• NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
• Heavy-duty Generac contactor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• 5 year limited warranty

Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.

• Connecting link between the generator and the power inlet box and/or transfer switch
• All rubber cord stays flexible even in subzero temperatures
• Molded ends provide greater reliability
• Male plug connects to generator and female end connects to power inlet box/transfer switch
• UL Listed

Champion Power Equipment 100375 Synthetic Rope Aluminum Hawse Fairlead is designed for 8000 lbs. to 12,000 lbs. or less Truck/SUV win. as well as 12-Volt DC win. of the same size. Although synthetic rope is extremely strong and lightweight, it can still be damaged or even experience breakage when used with a standard roller fairlead. Precisely machined and smooth, this aluminum hawse fairlead is designed to be used exclusively with synthetic winch rope to prevent damage and maximize the life of the rope. With a standard 10 in. (254 mm) bolt pattern, this dependable fairlead has a full black anodized finish with a laser-etched logo. For use with synthetic rope only. Buy with confidence - Champion will back up your purchase with a 1-year limited warranty.

• Smooth - this hawse fairlead is precisely machined and smooth, with a full black anodized finish and a laser-etched logo
• Exclusive - designed for exclusive use with synthetic winch rope to prevent damage and maximize the life of the rope
• Bolt Pattern - a standard 10 in. (254 mm) bolt pattern
• Versatile - use this aluminum hawse fairlead with 8000 lbs. to 12,000 lbs. Champion Truck/SUV win or other 12-Volt DC win of the same size
• Reliable - Champion will back up your purchase with a 1-year limited warranty

The Champion Power Equipment C90018 Weather-Resistant Storage Cover is designed to fit your 2800-Watt or higher inverter to keep it safe, clean and dry. Whether your inverter is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your inverter, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your inverter and its engine. It also features a quick-access zippers making it easy and convenient to access the carrying handles while the cover is on. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your inverter and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your inverter and prevent scuff marks and scratches. Protect your valuable Champion inverter year round with Champions complete selection of inverter covers including a 2000-Watt size. Buy with confidence -Champion Support will back up your purchase with a 1-year limited warranty.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Protect your inverter from sun and UV damage, rain, snow, dirt and more with this covers tough vinyl exterior
• The strong elastic base provides a secure, custom-like fit for your inverter
• This cover is designed for 2800-Watt or higher inverters, and features convenient zippers to access the carrying handles
• The durable cover fits over your inverter quickly to protect it while in storage
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

• Duromax 50 ft. 30 Amp 10Ga Portable Generator, Black
• XP3050GC is our robust 30-amp 50 ft 10-gauge heavy duty L14-30 generator power cord for home backup.
• This generator power cord features a 100% copper wire for better power quality
• Plug your generator directly to your home transfer switch via a 30A L14-30 Inlet (not included).
• Fits all generators with a 240V 30A (L14-30) output.
• Made with durability in mind. Equipped with a durable SJT jacket, reinforced blades, and grounded plugs.
• MFG# XP3050GC

After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.

• Use to perform complete maintenance on a Generac EcoGen air-cooled generator
• For use on a 6 kW, 530 cc generator
• Maintenance is recommended at every 200-hours of use or 2-years of ownership
• Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
• Oil not included

The Generator Transport Cart is designed to easily move and position any of the air-cooled generators without the need for additional people or equipment. Large wheels and a wide handle take the strain off transportation. By attaching the cart to the generator, the generator is lifted from the pallet by leverage and is easily wheeled to the appropriate location for final setting. The cart is compatible with any air cooled Generic model.

• Designed to allow a single person to move and position an air-cooled generator
• Large tires and wide handle remove the hassle of moving the generator to the install location
• Generator attaches to cart via lifting holes for security during transport
• Cart is compatible with any air cooled Generac model

The Champion Power Equipment C90010 Weather-Resistant Storage Cover is designed to fit your 2000 to 4000-Watt inverter tokeep it safe, clean and dry. Whether your inverter is on a dirty job or in storage, this cover provides vital protection. Once the cover is on your inverter, the elastic base will provide a secure, custom-like fit that looks great and provides powerful protection for your inverter and its engine. It also features a quick-access zipper making it easy and convenient to access the carrying handle while the cover is on. Featuring a tough, water-resistant vinyl exterior, this storage cover will keep your inverter and its engine protected from sun and UV damage, rain, snow, dirt, debris, dust, cobwebs, tree sap, birds and more. The inside of the cover is lined with cotton to protect your inverter and prevent scuff marks and scratches. Protect your valuable Champion inverter year round with Champions complete selection of inverter covers including a 2800 Watt or higher size. Buy with confidence Champion Support will back up your purchase with a 1-year limited warranty.

• Need help with service or repair? Champion Power Equipment is available to help 24 hours a day, 7 days a week. Call us at 1-877-338-0999.
• Protect your inverter from sun and UV damage, rain, snow, dirt and more with this covers tough vinyl exterior
• The strong elastic base provides a secure, custom-like fit for your generator
• This cover is designed for 2000 to 4000-Watt inverters, and features a convenient zipper for carrying handle access
• The durable cover fits over your inverter quickly to protect it while in storage
• Includes 1-year limited warranty with free lifetime technical support from dedicated experts

The Utility Brown Out Kit provides an option for areas that regularly experience utility brown outs by increasing the threshold that the utility power must achieve before allowing drop out or pick up. This ensures the proper voltage is fed into the transfer switch coils. Main features include.

• 240-Volt relay timer, 8 position, 600-Volt, 10 Amp socket relay and associated hardware
• Allows the nominal voltage pick up percentage to be increased to 90%
• Allows the nominal drop out, pick up percentage to be increased to 95%
• Compatible with: RTSX, RTSD, RSTE, RTSN, EZ switches up to 400 Amp, single phase (not compatible with GenReady)

The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.

• 30 Amp, NEMA L14-30
• Raintight design even when the generator cord is connected
• NEMA 3R enclosure is rated for indoor or outdoor installation
• UL Listed