Pool Pumps
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 2 HP
- 230 Volts
- 3450 RPM
- 11.2 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 13-7/8"
- 1.3 Service Factor
- 2.6 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- 303 Stainless steel threaded shaft
Pool Filter 2 in. Pressure Gauge Plastic. Threaded 1/4 in. Bottom Mount. Pressure Range 0-60 psi.
- Can be used on most brand name filter such has Pentair, Hayward, Waterway and Zodiac
- To be used on pool and spa filter
- 2 in. dial face
- Brass pipe threaded bottom mount
Pool Filter Pressure Gauge 2 in. Plastic. 1/4 in. Back Mount. Gauge Range 0-60 psi.
- Side mount gauge fits most D.E. filter, sand and cartridge filters
- Gauge fits on major brands including Hayward, Pentair, Waterway and Zodiac
- 2 in. dial face
- Brass pipe threaded fitting
Spider Gasket Diverter manufacture model Number 271148. Gasket is for High Flow 2 in. Top and Side Mount Clamp-on Multi-port Valve. Spider Diverter Gasket.
- Spider gasket 2 in.
- For use with high flow 2 in. top and side mount clamp-on pool and spa multi-port valve
- 2 in. multi-port valve diverter spider gasket
- Black
Square Flange Full-Rated 2-Compartment Pool Filter Motor. This is a 3 HP with 208-Volt to 230-Volt. Energy efficient.
- Square flange full-rated 2-compartment pool filter motor
- 3 HP
- 208-Volt to 230-Volt
- 3450 RPM
- Threaded shaft
- High service factor
- Energy efficient conservationist motor
Professional Series CAT Controllers ORP Sensor Comes with 24 in. Cable. Compatible Sensors For Monitoring And Controlling ORP. That is Oxidation-Reduction Potential Value Of Water Level And Tank Level.
- Professional series CAT controllers ORP sensor
- Comes with 24 in. cable
- ORP sensor for monitoring and controlling ORP- Oxidation Reduction Potential value of water level
- ORP sensor
IntelliChlor uses common table salt to produce all the chlorine a pool needs, safely, effectively and automatically. It provides the same sanitation performance as harsh chlorine additives without the drawbacks. For use in applications up to 60,000 Gal.
- Full diagnostic capabilities, including cell life tracking that communicates remaining hours of cell life in real-time and captures all performance data daily (production settings, hours of operation, chlorine output, cell cleaning cycles, salt readings,
- Push-button operation and easy-to-view displays enable fast checking of salt levels, cell cleanliness, sanitizer output, and water flow
- Automatic shut off feature protects the unit and prolongs cell life under low water temperature conditions
- On-time cycling prevents calcium and scale build-up to maximize cell life
- Ability to communicate with IntelliTouch, EasyTouch, and SunTouch automation systems
IntelliChlor chlorine generator power center is the transformer box for the salt cell. This unit converts AC electrical current to low voltage DC. It provides power to and from the IntelliChlor cell.
- Model 520556 for use with salt chlorinator cells IC20, IC40 and IC60
- Ability to communicate with EasyTouch and SunTouch automation systems
- Can also be used as a stand alone salt chlorine generating system
- Cell not included
Pool Pump Seal Assembly PS201. Pump Shaft Seal, Generic Shaft Seal Contains Buna Elastomers, A Phenolic (Plastic) Primary Ring And Ceramic Mating Ring. This Material Works Well In Applications Of Diluted Chlorine Over The Surface Of The Pump And Seal.
- Replace shaft seal whenever you replace the pump motor
- Shaft seal is salt and ozone resistant
- Seal prevents water from seeping into the motor
- Black
Gasket and O-Ring Kit 2. For use with Super Pro and Super II Pumps. Parts Included 1 O-141 Diffuser Gasket, 1 O-12 Pump Lid O-Ring, 1 G-345 Housing Gasket, 1 AS-1521 Seal.
- Pool pump seal repair kit 2
- Replacement part for pump model numbers SPX1600R, SPX3000S, SP300T, SPX1600Z2
- Complete gasket and shaft seal kit needed when replacing Super II pump motor
- Black
Challenger Pump Go-Kit. Go-Kit Includes All Gasket, O-Rings And Shaft Seal. Shaft Seal Contains Buna Elastomers, A Phenolic (Plastic) Primary Ring And Ceramic Mating Ring.
- Material works well in applications of diluted chlorine over the surface of the pump and seal
- 1 AS-200 seal, 1 O-421 diffuser O-ring, 1 O-419 housing O-ring, 1 O-301 strainer O-ring, 1 O-318 lid O-ring, 1 O-302 lid O-ring
- For use with Pac Fab challenger pumps
- Black
3 Horsepower Impeller. For use with Whisperflo and Intelliflo Pumps. Color Black.
- 3 HP impeller
- For use with WFE-12, WhisperFlo high performance pump, IntelliFlo versus Pump, IntelliFlo versus 3050, VF and VS plus SVRS 3 HP high performance pump
- Impeller 3 HP
- Black
Pool Replacement Go-Kit Viton Seal. Go-Kit Includes All Gasket, O-Rings And A Viton Shaft Seal. Shaft Seals Contain Viton Elastomers, A Carbon Primary Ring And A Polished Ceramic Mating Ring.
- Material works well in pools and spas that use ozone, salt chlorine generators or hydrogen peroxide based chemicals
- Parts included one G-95 housing gasket, 1 O-141 diffuser gasket, 1 O-177 lid gasket, 1 AS-1521 Viton(R) seal
- Use with: Hayward super pump series 1600, 2600, 2600X pumps
- Black
Magnatek Square Flange 5 HP Full Rated Energy Efficient Replacement Pool And Spa Motor. For Pentair Use With Challenger 5 HP Single Phase Pumps. Drip-Proof, No Base - Ball Bearings, Class B Insulation, Stainless Steel Shaft, 60 Hz.
- Threaded stainless steel shaft
- Energy efficient 208-230 voltage - 21.01 Amp to 19.4 Amp
- Mounting type c-face, no base - enclosure design open drip proof
- Square flange
- Black
Salt Chlorinator Cell IC40 with 15 ft. Cord. Salt Chlorinator Uses Common Table Salt To Produce All the Chlorine A Pool Needs, Safely, Effectively And Automatically. Same Sanitation Performance as manual Chlorine.
- IC40 salt chlorinator cell for with 15 ft. cord work with chlorine generator for pools up to 40,000 Gal.
- Ability to communicate with IntelliTouch, easy touch and sun touch automation systems
- Push-button operation and easy-to-view displays enable fast checking of salt levels, cell cleanliness, sanitizer output, and water flow
- Automatic shut off feature protects the unit and prolongs cell life under low water temperature conditions
- On-time cycling prevents calcium and scale build-up to maximize cell life
Hayward Super Pump Go Kit. Kit Includes All Gaskets, O-Rings And Shaft Seal. Shaft Seal Contains Buna Elastomers, A Phenolic (Plastic) Primary Ring And Ceramic Mating Ring.
- Material works well in applications of diluted chlorine over the surface of the pump and seal
- Parts included 1 each G-95 housing gasket, 1 each O-141 diffuser gasket, 1 each O-177 lid gasket, 1 each AS-1521 seal
- Rebuild kit for Hayward super pump
- Black
Pool Pump Shaft Seal Assembly 201. Generic - Shaft Seal Contains Buna Elastomers, A Phenolic (Plastic) Primary Ring And Ceramic Mating Ring. Shaft Size 3/4 in.
- Material works well in applications of diluted chlorine over the surface of the pump
- Always replace seal whenever replacing the motor
- Seal prevents water from seeping into the and damaging the motor
- Black
Dolphin Wave Robotic In ground pool cleaner. Clever Clean Technology. Scrubs floors, walls and waterlines.
- Cycle time 1-hours or 2.5-hours
- Full filter indicator
- Basic remote included
- 60 ft. patented swivel cable
- Includes caddy
Pentair Seal Plate. For us with IntelliFlo versus Pump. Almond Colored Seal Plate.
- Seal plate
- Manufactured after 6/94
- For use with IntelliFlo versus pump
- Almond
Shaft Seal Viton 1000V-9. Carbon faced V-type head. Shaft Size 5/8 in.
- Viton seal 1000
- Faced V-type head
- 5/8 in. shaft
- Black and sliver
Square Flange Full-Rated 5 Horse Power Replacement Pool and Spa Pump Motor. Threaded Shaft. Frame style 56Y and the voltages is 208-Volt to 230-Volt.
- Square flange full-rated pool and spa pump motor
- Switchless
- Energy efficient
- Mounting type C-face, no base
Viton Shaft Seal 200. Polished Cup Mounted Seat. Shaft Size 63 in.
- Viton shaft seal 200
- Polished cup mounted seat
- Shaft size 5/8 in.
- Black
Commercial Automated Professional Package pH and ORP Controller and Sensor, Glass-Filled Polycarbonate Enclosure. Model CAT-PP2000. 120/230 VAC (Input/Output).
- Digital, microprocessor based design with flash technology
- Advanced control features including proportional feed
- Weatherproof membrane switch front panel interface
- All factory settings are permanently stored in memory
- Simple installation, setup and operation
- Compatible with all types of chemical feed equipment
- Dry contact outputs provided for salt-chlorine systems
- Affordable and reliable chemical automation
- 5-year limited warranty on controller, 2-year limited warranty on sensors
Gasket and O-Ring Kit 38. For Maxi-Glass II and Dura-Glass II Pumps. Parts Included 1 O-113 Seal Plate O-Ring, 1 O-240 Seal Plate Housing O-Ring, 1 AS-1521 Seal, 1 O-83 Diffuser O-Ring, 1 O-12 Lid O-Ring, 1 O-39 Drain Plug O-Ring.
- Gasket and O-ring kit
- For use with maxi-glass II and DuraGlass II pumps
- One O-113 seal plate O-ring, one O-240 seal plate housing O-ring, 1 AS-1521 seal, one O-83 diffuser O-ring, one O-12 lid O-ring, one O-39 drain plug O-ring
- Black