Door Stops & Bumpers
The Everbilt Satin Nickel Spring Doorstop (5-Pack) helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Easy to install.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Easy installation
- Satin nickel finish adds a beautiful touch to your home decor
The Everbilt Hinge Pin Doorstop is held in place with a hinge pin. The self-adjusting pad makes full contact with the door. An oversized bumper mounted on an adjusting screw protects the door trim.
- Satin nickel finish
- Attaches to hinge
- No fasteners necessary
- Fits most standard residential door hinges
- Self-adjusting pad protects your door
- Decorative finish to match any home decor
The Everbilt 4 in. Satin Nickel Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
WEDGE DOOR STOP5-1/4 in. LENGTH X 2 in. WIDTH X 1-1/4 in. HEIGHTBROWN. Perfect for keeping your doors open reinforced with durable construction. Easy to use.
- Designed to hold heavy doors open
- Slide doorstop under any door to hold open at any angle
- Can be used on carpeting, hard wood and linoleum
- Textured surface provides added traction
This magnetic door holder is constructed from cast and comes in a satin nickel finish. It features a receiver with a spring-loaded steel button that mounts to the rear of the door. This door holder also serves as a door stop or wall protector.
- Cast construction
- Finished in satin nickel
- Can be mounted horizontally on the wall or vertically on the floor
- Serves as a wall protector or door stop
- Minimum buy is equal to 10-packages, 1-set per package
The Everbilt Bright Brass Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright Brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
The Everbilt Chrome Plated Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Chrome plated finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
Heavy-duty rubber door stops fit a variety of door clearances. They are bright in color for safety and high visibility. The non-marking bottom of the stop keeps your floor protected from scratches.
- Bright color for safety and high visibility
- Non-marking bottom protects your floors
- For industrial applications
- Heavy-duty rubber
This wall protector is constructed from vinyl and comes finished in white. It is self adhesive and protects interior walls from impact damage by shielding contact point of wall and door knob. Also used to repair damaged walls.
- Used to protect interior walls from impact damage by shielding contact point of wall and door knob
- 5 in. outside diameter
- White in color with smooth paintable surface
- Rigid vinyl construction
- Self-adhesive backing
- For further dimensional information, please see the line drawing
The Everbilt 4 in. Bright brass Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
The Everbilt Oil-Rubbed Bronze Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Oil-rubbed bronze finish
- Screws included
- Attaches to baseboard
- Can be installed on either baseboard or door
- Easy to install
The Ives by Schlage Concave Wall Bumper in Satin Chrome prevents damage to locks with projecting buttons and features concealed mounting which discourages vandalism or tampering. The bumper is available in multiple finishes to coordinate perfectly with other hardware in the home. It becomes especially edgy when finished in Satin Chrome.
- Made from high-quality PVC for enhanced durability
- Offers slip-joint connection
- Helps cap the ends of the PVC pipe to prevent water flow
- NSF certified for maximum safety
This quarter-size wall stop is constructed of a cast brass cover and a protruding rubber bumper. The cast brass housing comes in a brushed chrome finish and the rubber bumper is gray in color. The bumper inserts into the outer housing which threads onto the wall-fastened base plate with a 9/16 in. reach. This item will not repair holes caused by door knobs, but can prevent them when installed correctly.
- Used to prevent door knob handle from damaging walls
- 1 in. outside diameter with a 9/16 in. rubber bumper projection
- Brushed chrome cover ring with a gray rubber bumper insert
- Constructed of cast brass and rubber components
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
Ives Schlage Cast Brass, Conforms To Ansi A156. 16 L12141 For Brass. Packed with Wood Screw and Plastic Anchor. For doors with threshold or undercut doors. Chrome.
- Ives Schlage cast brass, conforms to ansi A156
- Packed with wood screw and plastic anchor
- For doors with threshold or undercut doors
- 16 L12141 for brass
These 30 degree hinge pin door stops are constructed of diecast and come in a brass plated finish. They feature an adjustable screw which allows for controlled stopping at various angles of door swing, and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door's hinge, or hinges. These door stops will work with hinge barrel pins that have a maximum outside diameter of 5/16 in., and they can be installed on 1, 2, or 3 hinges of a door. Door stops like these are simple to install and they are used by many.
- Used to prevent door handles from damaging adjacent walls, and for stopping the door at an alternate distance
- 1-1/4 in. long adjustable bolt, 5/8 in. outside diameter rubber bumpers, and a 5/16 in. inside diameter for hinge pin insertion
- Adjustable screw allows for desired door opening angle
- Zinc diecast construction with brass-plated finish and rubber bumper
- Dual bumper prevents wall or door damage
This wall protector is constructed from vinyl and comes finished in ivory. It is self adhesive and protects interior walls from impact damage by shielding contact point of wall and door knob. Also used to repair damaged walls.
- Used to protect interior walls from impact damage by shielding contact point of wall and door knob
- 5 in. outside diameter
- Ivory in color with a smooth paintable surface
- Rigid vinyl construction
- Self-adhesive backing
- For further dimensional information, please see the line drawing
The Everbilt Satin Nickel Light Duty Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- No fasteners required
- Attaches to baseboard
- Mounting hardware included
- Easy to install
These heavy-duty door stops are constructed of diecast and come in a satin nickel plated finish. They feature a rigid shaft construction with a 3 in. reach, and a white rubber tip to cushion and prevent unwanted damages to nearby walls. These rigid door stops mount over the baseboard with a wood screw insert affixed to the base of the stop. Door stops like these are easy to install and used by many.
- Used to prevent door handle of opening doors from hitting and damaging adjacent wall
- 3 in. reach
- Satin nickel finish
- Rigid diecast construction with rubber tip
- Door stops feature an installation fastener affixed behind the base of the stop
- Includes steel screw insert affixed to bottom
- Easy to install at bottom of walls over baseboard
