Sliding & Bypass Door Hardware
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Deluxe sliding patio door pull. 6-5/8 in. mounting hole centers. Features a solid wood handle section and chrome plated diecast mounting brackets.
- Deluxe solid wood pull
- Mounts to door surface with chrome brackets and screws
- 6-5/8 in. mounting hole centers
- Fits flush style locks only
- For interior use only
- Includes 1-handle
- Phillips screwdriver required for installation
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
If your sliding patio door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This C 1225 sliding patio Door handle set makes the DIY project a breeze, and it includes an inside pull with an outside non-locking pull. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a mortise style and fits 3-15/16 inch hole spacing. The door handle set is constructed of white painted diecast materials, perfect for your white sliding patio door. Because there are multiple internal mortise locks that are compatible with this handle set, a mortise lock component is not included with this handle set. Although the C 1225 sliding patio Door handle set comes non-keyed, Prime-Line Products does manufacture other components that can convert this set to a keyed-locking handle set.
- REPLACE OLD OR BROKEN DOOR HANDLES – When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new mortise style Prime-Line C 1225 Sliding Patio Door Handle Set.
- INCLUDES – (1) Standard reversible, non-handed handle set that can be mounted on both left-hand and right-handed sliding patio doors. This handle fits on doors that range from 1-1/2 inch to 1-3/4 inch thick. Mounting hole centers are 3-15/16 inch.
- EASY INSTALLATION – Installation is quick and easy – new patio door handles are well within reach! All fasteners necessary are included. The handle set is non-keyed, but a lock can be added (Mortise Lock not included)
- NON-KEYED - The exterior diecast pull comes non-keyed. Prime-Line Products does manufacture other components that can convert this set to a keyed-locking handle set.
- COMPLEMENTS YOUR WHITE SLIDING PATIO DOOR - This mortise hook style door handle is constructed of white painted diecast materials, making it the perfect choice for your white sliding door. For thick doors order E 2576 latch lever.
- NOTE - Please refer to the line art for dimensions and compare with your needs before ordering (Mortise lock sold separately)
- Easy to install in less than 30 minutes with a few simple tools
- For further dimensional information, please see the line drawing
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by Benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable
- An adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
Replacement for your existing worn out and broken shower door rollers. For best performance, replace both worn rollers on the bottom of door. Make sure you replace the exact existing rollers.
- Quite nylon material
- Exact-replacement
- Includes screws
- Long-lasting
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. diameter base
- Steel pivot screw and nylon base
- Pack of 4
- Adjustable
- No tools required for installation
- For further dimensional information, please see the line drawing
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by Float Away steel framed doors
- 5-1/8 in. rod
- For further dimensional information, please see the line drawing
These Prime Line Products are surface mounted, no mortising required, universal design. Die cast inside pull with hardwood handle. Hardwood pull handle with stained finish.
- Hardwood handle
- 1-piece die cast base
- Mounting holes slotted for 6 1/2 in. or 6 5/8 in. mounting
- Aluminum finish
- Surface mount
- Mounting screws included
This 3/4 in. Dia. round edge nylon wheel fits a 3/4 in. to 1-3/8 in. thick by-passing door up to 50 lbs. It comes secured in a 1/2 in. offset adjustable bracket. The side mounted top hung design fits Cox top hung doors.
- Single wheel
- Side mounting
- Used by several manufacturers
- 3/4 in. O.D. round edge nylon wheel
- Provides smooth operation
- For further dimensional information, please see the line drawing
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This is a top mount bi-fold door pivot that is typically used on Alliance bi-fold doors. The spring loaded 1/4 inch steel pin inserts into a pre-drilled hole in the door and a top bracket above, creating a pivot point for your bi-fold door. Each steel pin is self-adjusting and features a mold injected clear plastic base. No fasteners are required for installation, but a soft mallet can be used with caution.
- Used by Alliance and a wide variety of bi-fold door manufacturers
- Top mounted design
- 3/8 inch diameter nylon base
- Steel base with nylon cap
- No fasteners required
- Grooved cone shaped pivot
- Please refer to the line art drawing and compare with your original item before purchasing
Injected nylon bottom guide for sliding tub enclosure doors. Fits 1/2 in. thick door rails. Used by International.
- Keeps sliding tub enclosure doors aligned
- Used by enclosures manufactured by International
- Clear in color
- Fits 1/2 in. thick door panels
- Double sided tape included
- For further dimensional information, please see the line drawing
This roller assembly is constructed from metal. It comes affixed to a 3/8 in. offset stamped steel bracket. It fits on doors that are 3/4 in. to 1-3/8 in. thick.
- 7/8 in. O.D. nylon wheel
- 3/8 in. offset steel bracket with nylon adjusting wheel
- Used by several manufacturers
- For 3/4 in. to 1-3/8 in. thick doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
Strybuc Strybuc Bi-Fold Door Top Guide Wheel 7/8" Diameter Roller 3/8" diameter base Spring loaded Used on Bi-Fold closet doors Used by many Bi-Fold door manufacturers Fits doors 1" to 1-3/8" thick 2" tall Direct replacement for SKU 211776 Mfg #2-104-2
- 7/8" Diameter Roller
- 3/8" diameter base
- Spring loaded
- Used on Bi-Fold closet doors
This round edge nylon wheel comes affixed to a 1/4 in. offset adjustable bracket. The top hung side mounted design fits a 3/4 in. to 1-3/8 in. thick by-passing door up to 50 lbs. This roller fits Cox and similar styled doors.
- Single wheel
- Side mounting
- Used by several manufacturers
- 3/4 in. O.D. round edge nylon wheel
- Provides smooth operation
- For further dimensional information, please see the line drawing
Replace exact roller assembly on existing patio door. For smooth operation, replace both bottom roller assemblies. Other roller assemblies are available if yours is not shown.
- Steel housing
- Steel wheel
- Adjustable
- Plain bearing wheel
Replacement for your existing worn out and broken shower door rollers. For best performance, replace both worn rollers on the bottom of door. Make sure you replace the exact existing rollers.
- Quite nylon material
- Exact replacement
- Includes screws
- Long-lasting
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This 1/4 in. pivot rod is constructed from steel and zinc plated. It features an adjustable pivot and contains a 3/8 in. nylon cap. It has a length of 5-13/16 in. For steel framed bi-folding doors.
- 3/8 in. outside diameter nylon cap
- 1/4 in. outside diameter x 5-13/16 in. threaded steel pin
- Bottom Adjustment Pivot
- Fits Benchmark and a variety of other door brands
- Installation fasteners included
- For further dimensional information, please see the line drawing
This bi-fold door bottom pivot is constructed from steel and includes a nylon cap. It features a 5/16 in. Dia and a length of 5-5/8 in. This style pivot pin is used on Slimfold and other similar styled bi-folding doors.
- Steel construction
- Nylon constructed cap
- Bottom mount pivot
- Fits slimfold brand doors
- Includes tension spring
- For further dimensional information, please see the line drawing
This wardrobe door roller is constructed from nylon and comes affixed to a zinc plated steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Cox and similar styled doors that are 3/4 to 1-3/8 in. thick.
- Nylon roller
- 1/2 in. adjustable offset steel bracket
- Used by several manufacturers
- Fits 3/4 to 1-3/8 in. thick by-pass doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
Replacement for your existing worn out and broken shower door rollers. For best performance, replace both worn rollers on the bottom of door. Make sure you replace the exact existing rollers.
- Quite nylon material
- Exact replacement
- Includes screws
- Long-lasting
3 in. finger pulls 2-pack. Beveled glass, with pressure sensitive adhesive backing. Installs quickly and easily with the included fasteners. Easy to install.
- Adhesive back for easy mounting to door surface
- Mirrored glass with beveled edges
- Self-adhesive backing
- Used on sliding closet and cabinet doors
- Pass-through finger pull design
- For further dimensional information, please see the line drawing
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by Float Away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
This bi-fold door bottom pivot pin is constructed from steel. It features a black plastic retainer sleeve with a locking hex nut. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by Float Away steel framed doors
- 5 in. rod
- For further dimensional information, please see the line drawing
This is a bottom mount pivot used by a variety of other bi-fold door manufacturers. The 7/16 inch diameter nylon base houses a 1/4 inch pivot bolt with a unique star adjustment nut. Easy to install with a few simple tools.
- 7/16 inch O.D nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1-inch to 1-3/8 inch thick doors
- 2 Per package
This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.
- spring-loaded for self-adjustment and easy door removal
- 1/4 in. outside diameter x 5-1/2 in. steel pin with 3/8 in. outside diameter nylon cap
- Steel rod with plastic cap
- Fits Slimfold brand doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This wardrobe door roller is constructed from nylon and comes affixed to a zinc plated steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Cox and similar styled doors that are 3/4 in. to 1-3/8 in. thick.
- Nylon roller
- 1/4 in. adjustable offset steel bracket
- Used by several manufacturers
- Fits 3/4 to 1-3/8 in. thick by-pass doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
This is a bottom mount pivot used on Acme, Cox and a wide variety of different bi-fold doors. The steel base houses a 1/4 inch pivot with a hex head nut for adjustment. It fits 1 inch to 1-3/8 inch thick bi-fold doors weighing up to 50 lbs. each.
- Used by Acme, Cox and a wide variety of other bi-fold door manufacturers
- Maximum safe load capacity is 50 lbs.
- Fits doors 1 inch to 1-3/8 inch thick
- Steel construction
- Bottom mount design
- Please refer to the line art drawing and compare with your original item before purchasing
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
These bi-fold door guide caps are constructed of plastic and come 25 per pack. These replacement caps slide onto the tops of bi-fold guide rods to allow for smooth operation of doors. Use these caps to replace any worn or missing caps of matching dimensions to repair any poor, or rough-operating bi-fold doors. These caps are easy to install and used by many.
- Used to replace damaged or missing bi-fold door guide caps
- 1/4 in. inside diameter, 3/8 in. outside cap diameter, 1/2 in. outside rim diameter
- Used on 1/4 in. Dia steel pins, as on N-6730
- Plastic construction
- Item does not require fasteners for installation
- For further dimensional information, please see the line drawing
This is a fi-fold door guide pin assembly with a special nylon slide cap. It is used for a 11/16 in. track opening on a 1/4 in. outside diameter x 5-1/4 in. steel pin. Includes coil spring and cotter pin retainer.
- Bi-Fold Door Pivot Guide Rod
- Guide Interlocks with Track
- 1/4in. X 5-1/47in. Rod
- Zinc-plated
- Includes tension spring
- For further dimensional information, please see the line drawing
These bottom mounted door guides help to keep your bypassing doors on track. They feature a snap-in design that makes for easy installation. Designed for steel frame bypassing doors. Fits Cox Brand doors.
- Bottom mount
- 1 left hand and 1 right hand
- Steel housing with plastic guides
- Fits Cox brand steel framed sliding doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an adjustable, top mount design that also acts as a corner bracket for steel framed bypass doors. This roller fits Acme and other similar styled bypass doors.
- Nylon roller
- Adjustable top mount steel bracket
- Used by several manufacturers
- Fits Acme by-pass doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This sliding door handle set is constructed form extruded aluminum. It features wood grain feature strip and the handle latches into the doorjamb. There is no strike necessary. It is designed for Ador/HiLite doors.
- Designed for Ador/Hilite doors
- Wood grain feature strip
- Handle latches into door jamb no strike necessary
- 3-7/8 in. hole centers
- Extruded aluminum pulls
- For further dimensional information, please see the line drawing
This cylinder housing and 5-pin tumblers of this lock are constructed of brass, it comes finished with a chrome face and features a hardened cut-away tailpiece. This cylinder lock is used to key lock most surface mounted patio door handle sets and works with vertical and 45° keyways. Compatible keyways include those manufactured by Weiser, Kwikset and Weslock. Available keyed alike.
- Used to replace damaged key cylinders, or cylinders with lost or damaged keys
- Outside diameter of cylinder housing measures 1-9/16 in.
- 5-pin tumblers
- Lock body is constructed of solid brass
- Chrome face
- For further dimensional information, please see the line drawing
Replacement for your existing worn out and broken shower door rollers. For best performance, replace both worn rollers on the bottom of door. Make sure you replace the exact existing rollers.
- Quite nylon material
- Exact-replacement
- Includes screws
- Long-lasting
This roller assembly is constructed from nylon. It comes affixed to a 1/8 in. offset stamped steel bracket. It fits on doors that are 3/4 in. to 1-3/8 in. thick.
- 7/8 in. outside diameter nylon wheel
- 1/8 in. offset steel bracket with nylon adjusting wheel
- Used by several manufacturers
- For 3/4 in. to 1-3/8 in. thick doors
- Provides smooth operation
- Fasteners included
- For further dimensional information, please see the line drawing
6-5/8 in. H.C. sliding patio door handle. This handle set is constructed from die cast and comes finished in black. Features a reversible latch and is non-keyed. This type of handle set fits flush lock cutouts.
- Black Finish. Fits all popular flush lock punch outs
- Reversible Latch Hooks in 4 sizes. Non-keyed
- Fits 1 in. to 1-1/4 in. thick doors
- 6-5/8 in. holes on center, includes Keeper and Fasteners
- Flush mount design
- For further dimensional information, please see the line drawing