Sliding & Bypass Door Hardware
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
Deluxe sliding patio door pull. 6-5/8 in. mounting hole centers. Features a solid wood handle section and chrome plated diecast mounting brackets.
- Used on sliding glass doors
- 6-5/8 in. hole center space
- Polished chrome plated finish
- Diecast support brackets with wooden pull handle
- Designed to be used with flush type locks
- For further dimensional information, please see the line drawing
- Phillips screwdriver required for installation
This is a top mount bi-fold door pivot that is typically used on Alliance bi-fold doors. The spring loaded 1/4 in. steel pin inserts into a pre-drilled hole in the door and a top bracket above, creating a pivot point for your bi-fold door. Each steel pin is self-adjusting and features a mold injected clear plastic base. No fasteners are required for installation, but a soft mallet can be used with caution.
- Used by alliance and a wide variety of bi-fold door manufacturers
- Top mounted design
- 3/8 in. Dia nylon base
- Steel base with nylon cap
- No fasteners required
- Grooved cone shaped pivot
- Please refer to the line art drawing and compare with your original item before purchasing
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.
- Spring-loaded for self-adjustment and easy door removal
- 1/4 in. outside diameter x 5-1/2 in. steel pin with 3/8 in. outside diameter nylon cap
- Steel rod with plastic cap
- Fits slimfold brand doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by float away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
Injected nylon bottom guide for sliding tub enclosure doors. Fits 1/2 in. thick door rails. Used by International.
- Keeps sliding tub enclosure doors aligned
- Used by enclosures manufactured by International
- Clear in color
- Fits 1/2 in. thick door panels
- Double sided tape included
- For further dimensional information, please see the line drawing
This is a bottom mount pivot used by a variety of other bi-fold door manufacturers. The 7/16 in. Dia nylon base houses a 1/4 in. pivot bolt with a unique star adjustment nut. Easy to install with a few simple tools.
- 7/16 in. O.D nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- 2 per package
3 in. finger pulls 2-pack. Beveled glass, with pressure sensitive adhesive backing. Installs quickly and easily with the included fasteners. Easy to install.
- Adhesive back for easy mounting to door surface
- Mirrored glass with beveled edges
- Self-adhesive backing
- Used on sliding closet and cabinet doors
- Pass-through finger pull design
- For further dimensional information, please see the line drawing
This 3/4 in. Dia round edge nylon wheel fits a 3/4 in. to 1-3/8 in. thick by-passing door up to 50 lbs. It comes secured in a 1/2 in. offset adjustable bracket. The side mounted top hung design fits Cox top hung doors.
- Single wheel
- Side mounting
- Used by several manufacturers
- 3/4 in. O.D. round edge nylon wheel
- Provides smooth operation
- For further dimensional information, please see the line drawing
This bi-fold door bottom pivot pin is constructed from steel. It features a black plastic retainer sleeve with a locking hex nut. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by float away steel framed doors
- 5 in. rod
- For further dimensional information, please see the line drawing
This wardrobe door roller is constructed from nylon and comes affixed to a zinc plated steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Cox and similar styled doors that are 3/4 to 1-3/8 in. thick.
- Nylon roller
- 1/2 in. adjustable offset steel bracket
- Used by several manufacturers
- Fits 3/4 in. to 1-3/8 in. thick by-pass doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
This 1/4 in. pivot rod is constructed from steel and zinc plated. It features an adjustable pivot and contains a 3/8 in. nylon cap. It has a length of 5-13/16 in. For steel framed bi-folding doors.
- 3/8 in. outside diameter nylon cap
- 1/4 in. outside diameter x 5-13/16 in. threaded steel pin
- Bottom adjustment pivot
- Fits benchmark and a variety of other door brands
- Installation fasteners included
- For further dimensional information, please see the line drawing
These bi-fold door guide caps are constructed of plastic and come 25 per pack. These replacement caps slide onto the tops of bi-fold guide rods to allow for smooth operation of doors. Use these caps to replace any worn or missing caps of matching dimensions to repair any poor, or rough-operating bi-fold doors. These caps are easy to install and used by many.
- Used to replace damaged or missing bi-fold door guide caps
- 1/4 in. inside diameter, 3/8 in. outside cap diameter, 1/2 in. outside rim diameter
- Used on 1/4 in. diameter steel pins, as on N-6730
- Plastic construction
- This item does not require fasteners for installation
- For further dimensional information, please see the line drawing
This bi-fold door bottom pivot is constructed from steel and includes a nylon cap. It features a 5/16 in. Dia and a length of 5-5/8 in. This style pivot pin is used on Slimfold and other similar styled bi-folding doors. Easy to install.
- Steel construction
- Nylon constructed cap
- Bottom mount pivot
- Fits slimfold brand doors
- Includes tension spring
- For further dimensional information, please see the line drawing
This cylinder housing and 5-pin tumblers of this lock are constructed of brass, it comes finished with a chrome face and features a hardened cut-away tailpiece. This cylinder lock is used to key lock most surface mounted patio door handle sets and works with vertical and 45° keyways. Compatible keyways include those manufactured by Weiser, Kwikset and Weslock. Available keyed alike.
- Used to replace damaged key cylinders, or cylinders with lost or damaged keys
- Outside diameter of cylinder housing measures 1-9/16 in.
- 5-pin tumblers
- Lock body is constructed of solid brass
- Chrome face
- Please refer to the line art drawing for dimensions and compare with your needs before purchasing
This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by float away steel framed doors
- 5-1/8 in. rod
- For further dimensional information, please see the line drawing
This is a bottom mount pivot used on Acme, Cox and a wide variety of different bi-fold doors. The steel base houses a 1/4 inch pivot with a hex head nut for adjustment. It fits 1 inch to 1-3/8 inch thick bi-fold doors weighing up to 50 lbs. each.
- Used by acme, cox and a wide variety of other bi-fold door manufacturers
- Maximum safe load capacity is 50 lbs.
- Fits doors 1 in. to 1-3/8 in. thick
- Steel construction
- Bottom mount design
- Please refer to the line art drawing and compare with your original item before purchasing
6-5/8 in. H.C. sliding patio door handle. This handle set is constructed from die cast and comes finished in black. Features a reversible latch and is non-keyed. This type of handle set fits flush lock cutouts.
- REPLACEMENT SLIDING DOOR HANDLE - Use the sliding door handle set to replace damaged or missing flush mount hook style handles on sliding glass doors; includes four latches with different hook lengths to accommodate most popular flush lock punch-outs
- VERSATILE - Use this patio door handle replacement on both left and right-handed doors; designed to fit doors ranging from 1 inch to 1-1/4 inch thick, the glass door handle set fits all flush lock punch-outs with a 6-5/8 inch hole center spacing
- STRONG AND DURABLE - Designed to last for everyday use, the keyed replacement sliding door handle features a diecast construction with a black finish
- EASY INSTALLATION - Simply use the installation instructions and provided fasteners, including a 2-11/16 inch keeper that mounts on the jamb, to quickly and easily install this patio sliding glass door handle
- INCLUDES - Features a night lock that allows you to lock the door from the inside, but will not unlock with a key and it includes 4 different hook latches are included (3/8, 1/2, 3/4 and 5/8 inch)
- NOTE - Please refer to the line art drawing for all dimensions and compare to your needs before purchasing (Not Universal)
This 7/8 in. Dia nylon wheel features a top hung center grooved design. It comes secured to a 5/16 in. offset adjustable steel bracket. Fits old style Kenna Frame, Crawford, and Press-Rite doors.
- 7/8 in. outside diameter center groove nylon wheel
- 5/16 in. offset adjustable steel bracket
- Used by several manufacturers
- Zinc plated finish
- Provides smooth operation
- For further dimensional information, please see the line drawing
This roller assembly is constructed from nylon. It comes affixed to a 1/8 in. offset stamped steel bracket. It fits on doors that are 3/4 in. to 1-3/8 in. thick.
- 7/8 in. outside diameter nylon wheel
- 1/8 in. offset steel bracket with nylon adjusting wheel
- Used by several manufacturers
- For 3/4 in. to 1-3/8 in. thick doors
- Provides smooth operation
- Fasteners included
- For further dimensional information, please see the line drawing
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing