Searched for "31162800"
This bi-fold door repair kit includes replacement parts to repair one 2-panel set of hinged bi-folding doors. The plastic bases of the pivots and guide measure 3/8 inch in outside diameter, and the guide features a 7/8 inch outside diameter plastic wheel. A steel bottom pivot bracket and door aligner are also included, together with a wooden knob that can be finished in stain or paint. The snugger has a white plastic body with a steel spring, and the fasteners for all components are included with each package. Hinges are not included with this kit. These components are used by a variety of bi-folding closet door manufacturers. Tip: In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provides for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening.
- REPAIR BI-FOLDING DOORS - Easily repair one set of wood or metal hinged bi-folding doors with this all-inclusive DIY kit. For use with 3/8 inch outside diameter pivots and guides in a 7/8 inch wide bi-fold door track.
- INCLUDES - This bi-fold door repair kit includes top and bottom pivots, 7/8 inch plastic guide wheel, steel bottom pivot bracket, wooden knob, white plastic snugger with steel spring, steel aligners and fasteners for all components. Please note: Track and hinges are not included.
- CUSTOMIZABLE WOODEN KNOB - The kit includes an unfinished wooden knob that can be stained or painted to match existing finishes.
- EASY AND ECONOMICAL - With everything needed to repair one 2-panel set of hinged bi-folding doors, you can quickly and easily fix an existing door rather than purchase a new one.
- INSTALLATION TIP - In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provide for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening. If you need to repair both pairs (or all 4 doors), please purchase two kits.
- Repair kit contains parts for a single set of bi-fold doors
- Must purchase 2 sets if you need to replace both pairs (4 doors)
- For further dimensional information, please see the line drawing
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
Spring loaded top guide and pivot. 7/16 in. Dia cap with 7/16 in. Dia nylon base. Used by Johnson and others.
- Spring-loaded
- Nylon roller is 7/8 in. Dia
- White in color
- Fits Kenna frame and others
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 7/16 diameter holes. It includes one spring-loaded Prime-Line part N 6545 top bi-fold pivot with 7/16 inch base and 3/8 inch diameter pivot cap, one spring-loaded 7/8 inch diameter Prime-Line part N 6544 top roller guide with a 7/16 inch diameter base, one pair of door surface aligners , one Prime-Line part N 6696 jamb and floor mount pivot bracket, one Prime-Line part N 6696 adjustable bottom pivot with a 7/16 inch diameter base, and one Prime-Line part N 6543 bottom pivot with an adjustable self-lubricating plastic bushing. These repair parts are used on bi-fold doors manufactured by Acme, Cox, Stanley and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 inch thick and up to 50 lbs.
- Includes one Prime-Line part N 6545 bi-fold top mount pivot which has a 7/16 inch diameter spring-loaded steel base and 3/8 inch diameter plastic cap
- One spring-loaded Prime-Line part N 6544 bi-fold door top roller guide with a 7/8inch plastic wheel and a 7/16 inch diam. spring-loaded steel base
- One N-6538 pair of non-handed bi-fold door surface aligners to keep the doors aligned and tightly closed. Constructed of steel
- One Prime-Line part N-6696 bottom pivot constructed of a 7/16 inch diameter plastic base with a height-adjusting grooved cone-shaped steel pivot
- Includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, that is a steel base with an adjustable self-lubricating plastic bushing
- Installation fasteners included
- Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
These kickplates come with matching finish mounting screws and are designed for convenient door protection. 6 in. or 8 in. tall door kick plates are available in different lengths from 30 in. to 34 in. Kickplates are typically the width of the door less 2 in.
- 8 in. x 34 in. overall size
- Stainless steel
- Easy installation
- 0.050-Gauge
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
This screen door tension roller features a nylon, center grooved wheel. It comes affixed to a heat treated high tension steel spring. This style of roller is used by Metal Industries.
- Nylon wheel with center groove 1 in. O.D
- Used by metal industries
- Used by several manufacturers
- Affixed to high tension steel spring
- Provides smooth operation
- For further dimensional information, please see the line drawing
Strybuc Bi-Fold Door Top Pivot 1/4" Diameter Top Pivot Pin 3/8" diameter base Spring loaded Used on Bi-Fold closet doors Used by many Bi-Fold door manufacturers Fits doors 1" to 1-3/8" thick 2" tall Direct replacement for SKU 828700 Mfg #2-110-4
- 1/4" Diameter Top Pivot Pin
- 3/8" diameter base
- Spring loaded
- Used on Bi-Fold closet doors
This bi-fold door guide wheel is constructed from nylon and comes affixed to a steel base. It features a top mount spring-loaded self-adjusting design. This guide wheel fits 1 in. to 1-3/8 in. thick bi-fold doors up to 30 lbs. each.
- Nylon wheel, steel base
- Top mount spring-loaded design
- White in color
- Fits 1 in. to 1-3/8 in. thick bi-fold doors
- 30 lbs., carrying capacity
- For further dimensional information, please see the line drawing
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 10" X 34", Finish: Aluminum, Material: Aluminum.
- 10" Height
- 34" Width
- Satin Aluminum Finish
- Aluminum Base
- 16 Gauge (0.050)
Strybuc 6' Strybuc Bi-Fold Closet Door Track Kit For 2 Door Panels Includes hardware, fasteners and instructions For Bi-fold and wardrobe closets Direct replacement for SKU 905693 Mfg #8-562-6
- For 2 Door Panels
- Includes hardware, fasteners and instructions
- For Bi-fold and wardrobe closets
- Direct replacement for SKU 905693
Injected nylon bottom guide for sliding tub enclosure doors. Fits 1/2 in. thick door rails. Used by International.
- Keeps sliding tub enclosure doors aligned
- Used by enclosures manufactured by International
- Clear in color
- Fits 1/2 in. thick door panels
- Double sided tape included
- For further dimensional information, please see the line drawing
Can Be Easily Cut Down For Smaller Sizes. Used For Slimfold Bi-Fold Doors. Length: 6 Ft.
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 10" X 34", Finish: Gold Anodized, Material: Aluminum.
- 10" Height
- 34" Width
- Gold Anodized Finish
- Aluminum Base
- 16 Gauge (0.050)
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by float away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
The 299 strike is used with most Von Duprin rim exit devices. It is a roller strike designed a third screw that provides an adjustment feature that helps easy maintenance of the doors an frames over time.
The Bi-Fold Door Top Guide Wheel is made up of 4 parts: plastic pivot, spring, iron ring, bar and sleeve. plastic pivot is white. The 2.52 in. L full the Bi-Fold Door Top Guide Wheel. Sold in multiples 5.
- Dimeter of plastic pivot is 7/8 in.
- Length of sleeve is 1-1/2 in.
- Quick installation
- Easy installation
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 8" X 34", Finish: Aluminum, Material: Aluminum.
- 8" Height
- 34" Width
- Satin Aluminum Finish
- Aluminum Base
This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.
- Spring-loaded for self-adjustment and easy door removal
- 1/4 in. outside diameter x 5-1/2 in. steel pin with 3/8 in. outside diameter nylon cap
- Steel rod with plastic cap
- Fits slimfold brand doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
The Falcon 1690 Concealed Vertical Rod Exit Device provides exit security for 36" doors. PB48 Strike Plate and field reversible. Ideal for demanding, high traffic application.
- For Doors with 1-3/4" thickness.
- Black Powder Coaded metal end caps for durability.
- Cast Metal cover plates
- All machine screw mounting
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
Bundles of 8" composite shims
- 32 shims per bundle
Liftmaster Keypad Smart Reader with Multi Technology. Ble Radio Enables Myq Mobile Credentials With The Myq Community App Via 3 Modes – Tap, Touch & Alert. Compatible with 125 KHz proximity cards and fobs: 26 Bit (HID), 30 Bit, 36 Bit LiftMaster, and 37 Bit. Compatible with 13.56 MHz cards and fobs: 32 Bit Mi Fare, 56 Bit LiftMaster. 10-key keypad; perfect for one-time use pins or guest pins thru myQ community. Suitable for indoor/outdoor applications: IP55 environmental rating. Mfg #SRDRKP
- Ble Radio Enables Myq Mobile Credentials With The Myq Community App Via 3 Modes – Tap, Touch & Alert
- Compatible with 125 KHz proximity cards and fobs: 26 Bit (HID), 30 Bit, 36 Bit LiftMaster, and 37 Bit
- Compatible with 13.56 MHz cards and fobs: 32 Bit Mi Fare, 56 Bit LiftMaster
- 10-key keypad; perfect for one-time use pins or guest pins thru myQ community
- Suitable for indoor/outdoor applications: IP55 environmental rating
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value. And it is made in Taiwan.
- Superior quality
- Easy installment
- Good coating quality
- Friendly use
- Excellent package
- Good looking
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The Bi-Fold Door Top Pivot is made up of 4 parts: plastic pivot, spring, bar and plastic sleeve. Plastic sleeve and plastic pivot are white. The 1-9/16 in. L full the Bi-Fold Door Top Pivot. Sold in multiples 1.
- Dimeter of plastic pivot is 7/8 in.
- Dimeter of plastic sleeve is 3/8 in.
- Quick installation
- Easy installation
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Tell Manufacturing's 8400B is a Grade 1 vertical rod exit device for commercial applications. The 8400B series is surface mounted and will fit on doors 28 in. to 36 in. W, which is easily field sizable. This vertical rod panic will work on doors 1-3/4 in. to 2 in. T. The vertical rod panic has an aluminum finish and complies ANSI A156.3.
- Easy installation
- Pullman latch bolts top and bottom
- Stainless steel 1/2 in. throw
- Works on wood or metal doors
- Voltage 115-Volt
- Cycle 60 Hz
- Maximum static pressure 100 PA
- Daisy chain: yes
- Stackable: yes, 6 units
- Product weight: 23.1 lbs.
- Boxed weight: 25.3 lbs.
- Size: 11.4 in. H x 18.5 in. W x 23.2 in. D
- Wheel speed RPM: 1200 RPM to 1580 RPM
- Attached cord 15 ft. 14 AWG
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
- Contains 150 Pieces
- 30 Of The Most Popular Seats
- Illustrated Sizing Chart In Lid
- Durable, High Impact, Lightweight Plastic Case
- Case size: 10-1/2"W X 7"L X 1-7/8"H
- Case made of impact-resistant plastic
- Contains 150 pieces
- Includes 30 popular seats
- Features an illustrated sizing chart in the lid for reference
This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by float away steel framed doors
- 5-1/8 in. rod
- For further dimensional information, please see the line drawing
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Liftmaster Smart Access 2-Door Controller. Universal Compatibility, Use With 26-Bit, 30-Bit And 37-Bit Wiegand-Compatible Readers, Receivers And Rfid Readers. Remote programming and activity monitoring using myQ Community web platform. Know when codes are overused or if service is needed for the Smart Video Intercom (CAPXLV,CAPXM), Smart Access 2-Door Controller (CAP2D). Flexibility of device placement , no wiring between controllers and power over ethernet. myQ Community web platform streamlines tenant information management, enhancing property manager productivity and resident experience through an integration partnership with RealPage, Yardi, Entrata, and more. Residents can visually identify guests at the entrance and grant / deny access from their smartphone. They can also unlock any authorized entrance / elevator / garage or virtually send guest passes from their smartphone at anytime using app. A cost-effective credentialed access solution through the myQ Community app permitting access to the elevator and any floor. Keeps data protected and safeguards resident information with cloud-based security. Multiple Ways to Connect CAP2D to myQ Community, Cellular, Wired High-Speed DSL, PoE. Mfg #CAP2D
- Universal Compatibility, Use With 26-Bit, 30-Bit And 37-Bit Wiegand-Compatible Readers, Receivers And Rfid Readers.
- Remote programming and activity monitoring using myQ Community web platform.
- Know when codes are overused or if service is needed for the Smart Video Intercom (CAPXLV,CAPXM), Smart Access 2-Door Controller (CAP2D).
- Flexibility of device placement , no wiring between controllers and power over ethernet.
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
This roller assembly is constructed from nylon. It comes affixed to a 1/8 in. offset stamped steel bracket. It fits on doors that are 3/4 in. to 1-3/8 in. thick.
- 7/8 in. outside diameter nylon wheel
- 1/8 in. offset steel bracket with nylon adjusting wheel
- Used by several manufacturers
- For 3/4 in. to 1-3/8 in. thick doors
- Provides smooth operation
- Fasteners included
- For further dimensional information, please see the line drawing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Bumper for metal door frames. Installs in hole in frame. No tools required.
- Made of rubber
- Easy to install
- For mostly commercial applications
- Silences door closures
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
- Rhodes lever design
- Classroom function
- Dimensions: 2-3/4”x 10-3/4”x 2-7/32”
- Supplied with 5 pin SC1 keyway Rim Cylinder and 2-keys
- BHMA, ANSI, UL
- Finish: 26D (Satin Chrome)