Searched for "31162800"
This bi-fold door repair kit includes replacement parts to repair one 2-panel set of hinged bi-folding doors. The plastic bases of the pivots and guide measure 3/8 inch in outside diameter, and the guide features a 7/8 inch outside diameter plastic wheel. A steel bottom pivot bracket and door aligner are also included, together with a wooden knob that can be finished in stain or paint. The snugger has a white plastic body with a steel spring, and the fasteners for all components are included with each package. Hinges are not included with this kit. These components are used by a variety of bi-folding closet door manufacturers. Tip: In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provides for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening.
- REPAIR BI-FOLDING DOORS - Easily repair one set of wood or metal hinged bi-folding doors with this all-inclusive DIY kit. For use with 3/8 inch outside diameter pivots and guides in a 7/8 inch wide bi-fold door track.
- INCLUDES - This bi-fold door repair kit includes top and bottom pivots, 7/8 inch plastic guide wheel, steel bottom pivot bracket, wooden knob, white plastic snugger with steel spring, steel aligners and fasteners for all components. Please note: Track and hinges are not included.
- CUSTOMIZABLE WOODEN KNOB - The kit includes an unfinished wooden knob that can be stained or painted to match existing finishes.
- EASY AND ECONOMICAL - With everything needed to repair one 2-panel set of hinged bi-folding doors, you can quickly and easily fix an existing door rather than purchase a new one.
- INSTALLATION TIP - In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provide for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening. If you need to repair both pairs (or all 4 doors), please purchase two kits.
- Repair kit contains parts for a single set of bi-fold doors
- Must purchase 2 sets if you need to replace both pairs (4 doors)
- For further dimensional information, please see the line drawing
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
Spring loaded top guide and pivot. 7/16 in. Dia cap with 7/16 in. Dia nylon base. Used by Johnson and others.
- Spring-loaded
- Nylon roller is 7/8 in. Dia
- White in color
- Fits Kenna frame and others
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
These kickplates come with matching finish mounting screws and are designed for convenient door protection. 6 in. or 8 in. tall door kick plates are available in different lengths from 30 in. to 34 in. Kickplates are typically the width of the door less 2 in.
- 8 in. x 34 in. overall size
- Stainless steel
- Easy installation
- 0.050-Gauge
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 7/16 diameter holes. It includes one spring-loaded Prime-Line part N 6545 top bi-fold pivot with 7/16 inch base and 3/8 inch diameter pivot cap, one spring-loaded 7/8 inch diameter Prime-Line part N 6544 top roller guide with a 7/16 inch diameter base, one pair of door surface aligners , one Prime-Line part N 6696 jamb and floor mount pivot bracket, one Prime-Line part N 6696 adjustable bottom pivot with a 7/16 inch diameter base, and one Prime-Line part N 6543 bottom pivot with an adjustable self-lubricating plastic bushing. These repair parts are used on bi-fold doors manufactured by Acme, Cox, Stanley and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 inch thick and up to 50 lbs.
- Includes one Prime-Line part N 6545 bi-fold top mount pivot which has a 7/16 inch diameter spring-loaded steel base and 3/8 inch diameter plastic cap
- One spring-loaded Prime-Line part N 6544 bi-fold door top roller guide with a 7/8inch plastic wheel and a 7/16 inch diam. spring-loaded steel base
- One N-6538 pair of non-handed bi-fold door surface aligners to keep the doors aligned and tightly closed. Constructed of steel
- One Prime-Line part N-6696 bottom pivot constructed of a 7/16 inch diameter plastic base with a height-adjusting grooved cone-shaped steel pivot
- Includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, that is a steel base with an adjustable self-lubricating plastic bushing
- Installation fasteners included
- Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
Injected nylon bottom guide for sliding tub enclosure doors. Fits 1/2 in. thick door rails. Used by International.
- Keeps sliding tub enclosure doors aligned
- Used by enclosures manufactured by International
- Clear in color
- Fits 1/2 in. thick door panels
- Double sided tape included
- For further dimensional information, please see the line drawing
This screen door tension roller features a nylon, center grooved wheel. It comes affixed to a heat treated high tension steel spring. This style of roller is used by Metal Industries.
- Nylon wheel with center groove 1 in. O.D
- Used by metal industries
- Used by several manufacturers
- Affixed to high tension steel spring
- Provides smooth operation
- For further dimensional information, please see the line drawing
Strybuc Bi-Fold Door Top Pivot 1/4" Diameter Top Pivot Pin 3/8" diameter base Spring loaded Used on Bi-Fold closet doors Used by many Bi-Fold door manufacturers Fits doors 1" to 1-3/8" thick 2" tall Direct replacement for SKU 828700 Mfg #2-110-4
- 1/4" Diameter Top Pivot Pin
- 3/8" diameter base
- Spring loaded
- Used on Bi-Fold closet doors
This bi-fold door guide wheel is constructed from nylon and comes affixed to a steel base. It features a top mount spring-loaded self-adjusting design. This guide wheel fits 1 in. to 1-3/8 in. thick bi-fold doors up to 30 lbs. each.
- Nylon wheel, steel base
- Top mount spring-loaded design
- White in color
- Fits 1 in. to 1-3/8 in. thick bi-fold doors
- 30 lbs., carrying capacity
- For further dimensional information, please see the line drawing
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 10" X 34", Finish: Aluminum, Material: Aluminum.
- 10" Height
- 34" Width
- Satin Aluminum Finish
- Aluminum Base
- 16 Gauge (0.050)
Strybuc 6' Strybuc Bi-Fold Closet Door Track Kit For 2 Door Panels Includes hardware, fasteners and instructions For Bi-fold and wardrobe closets Direct replacement for SKU 905693 Mfg #8-562-6
- For 2 Door Panels
- Includes hardware, fasteners and instructions
- For Bi-fold and wardrobe closets
- Direct replacement for SKU 905693
Can Be Easily Cut Down For Smaller Sizes. Used For Slimfold Bi-Fold Doors. Length: 6 Ft.
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 10" X 34", Finish: Gold Anodized, Material: Aluminum.
- 10" Height
- 34" Width
- Gold Anodized Finish
- Aluminum Base
- 16 Gauge (0.050)
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by float away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
The Bi-Fold Door Top Guide Wheel is made up of 4 parts: plastic pivot, spring, iron ring, bar and sleeve. plastic pivot is white. The 2.52 in. L full the Bi-Fold Door Top Guide Wheel. Sold in multiples 5.
- Dimeter of plastic pivot is 7/8 in.
- Length of sleeve is 1-1/2 in.
- Quick installation
- Easy installation
- Aluminum
- Used On Doors Subject To Marring Or Damage From Foot Traffic
- 16 Gauge (0.050) Laquer Coated and Salt Spray Tested
- Pre-Drilled.
- Screws Included.
- 6" Height
- 34" Width
- Satin Nickle Aluminum Finish
- 16 Gauge (0.050)
This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.
- Spring-loaded for self-adjustment and easy door removal
- 1/4 in. outside diameter x 5-1/2 in. steel pin with 3/8 in. outside diameter nylon cap
- Steel rod with plastic cap
- Fits slimfold brand doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
The Falcon 1690 Concealed Vertical Rod Exit Device provides exit security for 36" doors. PB48 Strike Plate and field reversible. Ideal for demanding, high traffic application.
- For Doors with 1-3/4" thickness.
- Black Powder Coaded metal end caps for durability.
- Cast Metal cover plates
- All machine screw mounting
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 8" X 34", Finish: Aluminum, Material: Aluminum.
- 8" Height
- 34" Width
- Satin Aluminum Finish
- Aluminum Base
AMRAD USA MADE RUN CAPACITOR
- 35+5.0 MF 370 440 RA2000/37 44-(356+505) +/-10%
- High-quality aluminum case ensures lasting durability
- Dual phase capacitor for reliable performance
- Designed to efficiently withstand temperatures from -40°C to 70°C
- Suitable for indoor use
Bottom Pivot.
- The finish is zinc.
- Sold in multiples 1.
- The installation is quick.
- The installation is easy.
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
- Dial Basics soap is a mild, hypoallergenic liquid lotion soap that is gentle on the skin and has a fresh floral fragrance. This premium product is perfect for commercial settings including health care facilities, schools, offices, daycares and more. Part of the Dial Professional Series "Green Assurance Program"
- 16 oz pump bottle, 12 per case
- Priced and sold each
- Mild and hypoallergenic soap ensures skin gentleness
- Ideal for use in healthcare facilities, schools, offices, daycares, and more
- 16 oz. pump bottle allows for easy dispensing of liquid soap
- Contains floral fragrance for freshness
Bumper for metal door frames. Installs in hole in frame. No tools required.
- Made of rubber
- Easy to install
- For mostly commercial applications
- Silences door closures
The Bi-Fold Door Top Pivot is made up of 4 parts: plastic pivot, spring, bar and plastic sleeve. Plastic sleeve and plastic pivot are white. The 1-9/16 in. L full the Bi-Fold Door Top Pivot. Sold in multiples 1.
- Dimeter of plastic pivot is 7/8 in.
- Dimeter of plastic sleeve is 3/8 in.
- Quick installation
- Easy installation
The 299 strike is used with most Von Duprin rim exit devices. It is a roller strike designed a third screw that provides an adjustment feature that helps easy maintenance of the doors an frames over time.
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Hex Key Wrench Insert. 0.19 And 0.31". For Opening And Closing Most Base Mounted Service Valves On A/C Units. This 0.18 To 0.31" Inhex Adapter Bit Fits In A 0.25" Square Socket. 0.18" Hex Tip With 0.31" Hex Shaft Beneath. Mfg #RWA10
- 0.19 And 0.31"
- For Opening And Closing Most Base Mounted Service Valves On A/C Units
- This 0.18 To 0.31" Inhex Adapter Bit Fits In A 0.25" Square Socket
- 0.18" Hex Tip With 0.31" Hex Shaft Beneath
This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by float away steel framed doors
- 5-1/8 in. rod
- For further dimensional information, please see the line drawing
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
- Aluminum
- Used On Doors Subject To Marring Or Damage From Foot Traffic
- 16 Gauge (0.050) Laquer Coated and Salt Spray Tested
- Pre-Drilled.
- Screws Included.
- 8" Height
- 34" Width
- Satin Nickel Aluminum Finish
- 16 Gauge (0.050)
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
This 1/4 in. pivot rod is constructed from steel and zinc plated. It features an adjustable pivot and contains a 3/8 in. nylon cap. It has a length of 5-13/16 in. For steel framed bi-folding doors.
- 3/8 in. outside diameter nylon cap
- 1/4 in. outside diameter x 5-13/16 in. threaded steel pin
- Bottom adjustment pivot
- Fits benchmark and a variety of other door brands
- Installation fasteners included
- For further dimensional information, please see the line drawing
This roller assembly is constructed from nylon. It comes affixed to a 1/8 in. offset stamped steel bracket. It fits on doors that are 3/4 in. to 1-3/8 in. thick.
- 7/8 in. outside diameter nylon wheel
- 1/8 in. offset steel bracket with nylon adjusting wheel
- Used by several manufacturers
- For 3/4 in. to 1-3/8 in. thick doors
- Provides smooth operation
- Fasteners included
- For further dimensional information, please see the line drawing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
- Rhodes lever design
- Classroom function
- Dimensions: 2-3/4”x 10-3/4”x 2-7/32”
- Supplied with 5 pin SC1 keyway Rim Cylinder and 2-keys
- BHMA, ANSI, UL
- Finish: 26D (Satin Chrome)
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value. And it is made in Taiwan.
- Superior quality
- Easy installment
- Good coating quality
- Friendly use
- Excellent package
- Good looking