Searched for "46171500"
As the industry leader, Kwikset has provided trusted security for over 60-years and has become synonymous with security, peace of mind, style and innovation. Kwikset offers a wide variety of door hardware products. Including pocket door locks, designer roses and other hardware accessories to coordinate your entire home. Covered by Kwikset's lifetime mechanical and finish warranty.
- Kwikset model number 83796
- Available in 7 finishes
- Satin nickel finish
- 2.25 in. faceplate height
- 1.75 in. faceplate width
- Round corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
This decorative door knocker and viewer is constructed of diecast materials and comes in a satin nickel finish. Its vintage design extends a total of 5-1/2 inch tall and features a 180 degree angle of view. This door knocker and viewer can be installed on doors from 1-3/8 inch thick to 1-3/4 inch thick, with a required 9/16 inch inside diameter hole for installation of viewer. The integrated door viewer within this door knocker is designed to help keep you safe when answering your door and is ideal for day or night viewing with adequate exterior lighting. This door knocker and viewer is easy to install and it is used by many. See Prime-Line part S 4793 for a door viewer inside cover. Inside viewer covers (not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.
- Used on entry doors to provide privacy while viewing from inside the home, and also as a decorative door knocker for visitors
- Requires a 9/16 inch diameter installation hole, designed to install on 1-3/8 inch to 1-3/4 inch thick doors, with a total height of 5-1/2 in
- Satin nickel-plated finish
- Diecast construction
- Installation fasteners included
- Please refer to the line art for dimensions and compare with your needs before ordering
This deluxe knocker and viewer is constructed from die cast and comes finished in satin chrome. It features a 180 degree viewer and requires a 9/16 In. installation hole. It fits on doors that are 1-3/8 in. to 1-3/4 in. thick.
- Used on entry doors to provide privacy while viewing from inside the home, and also as a decorative door knocker for visitors
- Requires a 9/16 in. diameter installation hole, designed to install on 1-3/8 in. to 1-3/4 in. thick doors, with a total height of 5-1/2 in.
- Satin chrome-plated finish
- Diecast construction
- Installation fasteners included
- For further dimensional information, please see the line drawing
All standard installation parts included. Protective coating to aid in the duration of the finish. Satin nickel finish.
- Knocker and viewer combination
- Has a 160 degree viewer
- Product is satin nickel in finish
- Product is for the exterior of a home
- Product is installed on an exterior door
- Product has a mounting screw on the interior of the door
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High-quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- No special tool required
2-1/8" X 1-1/8"
- Screws Furnished
- Primed
Covers up to 2-1/8" hole
- Standard 161 prep
- Order latch and frame fillers separately
- Available finishes: SL (silver coated)
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- T strike
- Kwikset model number 83028
- Available in 7 finishes
- 2.75 in. H
- 1.69 in. total W
- 1.125 in. W jamb
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
Ideal For Covering Exposed Holes In Doors. Covers Up To 2-5/8" Hole, Self-Centering Disc Prevents Plate Movement. For Wood Or Metal Doors. Prime Coat.
Packed 10 Per Case. For Installing Cylindrical Door Locks with A 2 in. Or 2-1/8 in. Bore. Backset 2-3/8 in. Door Thickness. 1-3/8 in. Overall Dimensions: 4 in. x 9 in. Finish: Stainless Steel.
- For use with cylindrical door locks with 2-1/8 in. hole
- 2-3/8 in. backset
- 1-3/4 in. door thickness
- 4 in. x 9 in.
- Brushed stainess steal finish
- #8 x 3/4 in. Phillips head truss head trim screws, and #8-32 x 1/4 in. flat head screws for latch supplied
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US3 bright brass
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
Packed 10 Per Case. For Installing Cylindrical Deadbolts with A 2-1/8 in. Bore. Backset 2-3/4 in.: Door Thickness: 1-3/4 in.: Overall Dimensions: 4-1/4 in. x 4-1/2 in. Finish: Stainless Steel.
- 2-3/4 in. back set
- 1-3/4 in. door thickness
- 1 in. to 1/2 in. hole for deadbolt
- Brushed stainless finish
- #8 x 3/4 in. Phillips head truss head trim screws, and #8-32 x 1/4 in. flat head screws for latch supplied
- For deadbolt
Satin brass finish. Narrow stile, face plate 1-1/4" wide. Solid cast latch, cavity depth = 1/2", width = 1/2", height = 1-3/8". Heavy duty latch spring. Mortise type, backset 1-9/16" Deep. Fail secure, standard action unlocks when energized. Corrosion resistant, plated face and latch. 8-16 Ac voltage. Min. Order: 1 EA
With mortise & universal strikes
- Screws included
- 1-3/16" throw
- Finish: Aluminum
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- 16 SEER Split System Heat Pump
- High-efficiency scroll compressor
- SmartShift technology to ensure quiet reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Copper tube/enhanced aluminum fin coil
- Fully charged for 15' of tubing length
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
- Goodman brand sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Service ports and controls are accessible while unit is operating
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Cooling Capacity (BTU/h): 36000
- SEER/EER: 16/13
- Min. Circuit Amps: 19.1
- Max Fuse Size: 30
- Voltage: 197/253
- Liquid Line Size (IN): 3/8
- Suction Line Size (IN): 7/8
- Dimensions (WxDxH)
This decorative door knocker and viewer is constructed of diecast materials and comes in a satin chrome finish. Its vintage design extends a total of 4 inch tall and features a 160 degree angle of view. This door knocker and viewer can be installed on doors from 1-3/8 inch thick to 1-3/4 inch thick, with a required 1/2 inch inside diameter hole for installation of viewer. The integrated door viewer within this door knocker is designed to help keep you safe when answering your door and is ideal for day or night viewing with adequate exterior lighting. This door knocker and viewer is easy to install and it is used by many. See Prime-Line part S 4793 for a door viewer inside cover. Inside viewer covers (not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.
- Used on entry doors to provide privacy while viewing from inside the home, and also as a decorative door knocker for visitors
- Requires a 1/2 inch diameter installation hole, designed to install on 1-3/8 inch to 1-3/4 inch thick doors, with a total height of 4 inch
- Satin chrome-plated finish
- Diecast construction
- Installation fasteners included
- Please refer to the line art for dimensions and compare with your needs before ordering
- Repairs broken door jambs quickly and inexpensively
- FIX-A-JAMB II is simply the easiest and most cost effective way to repair and reinforce a broken door frame
- Not recommended to stop forced entry
- Exterior model is made for 1-3/4" thick doors
- White
- Lock spacing: 4-1/2" to 21-1/2"
This is a strike. The main material is steel. The strike is mainly used in decorative.
- Length of strike is 280.5 mm
- Strike has 9-screws
- Material of screws is steel
- Center of strike is 170 mm
- Color of strike is brass
- Strike has 9 holes
These standard latch strikes are constructed of steel and come in a brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 inch fasteners included with each package. These latch strikes are used by many to replace most residential interior and exterior door strikes. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.
- Used as a standard latch strike that features an adjustable tab designed to eliminate door slop and chatter of closed doors
- Dimensions are 1-7/16 inch wide x 2-1/4 inch tall with mounting holes that are 1-5/8 inch on center
- Comes in a bright brass plated finish
- Constructed of stamped steel
- All necessary mounting hardware is included for a quick and easy installation
- Please refer to the line art for dimensions and compare with your needs before ordering
- Built-in stainless steel threaded insert
- Long lasting and secure mounting bolt
- Imported heavy-duty stainless steel trim screws
- Permanent holding power eliminates loosening of latch mounting screws
- For repairing, remodeling and reinforcing
- Save costly door replacement, help resist kick-in attacks and help keep wood doors from splitting
- Available in consumer-oriented box pack
Classic Wrap around plate. For use with 1 3/8" door with 2 3/8" backset. with 1 -2/18" hole. Solid brass finish
- 4" X 9"
- FOR 1 3/8"
- WITH 2 3/8" BACKSET
- 2 1/8" hole
- polished brass finish
- matching hardware supplied
Packed 10 Per Case. For Installing Cylindrical Deadbolts with A 2-1/8 in. Bore. Backset 2-3/8 in.: Door Thickness: 1-3/4 in.: Overall Dimensions: 4 in. x 4-1/2 in. Finish: Polished Brass.
- For installing cylindrical deadbolts with a 2-1/8 in. bore
- Backset 2-3/8 in.
- Door thickness 1-3/4 in.
- Polished brass finish
- Height 4-1/2 in.
- Width 4 in.
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand