Searched for "31161504"
Has A Rounded Top Surface and A Flat Bearing Surface. Combo Drive Accepts Phillips and Standard Blade Screwdrivers. Often Used When A Fastener Is Expected To Be Driven and Backed Out Several Times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Accepts standard flat blade screwdrivers. Machine screws have a uniform diameter the entire length of the shaft and are used to fasten machine components, appliances and more.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Flat blade (slotted) screwdriver
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Phillips flat machine screws zinc: A countersunk head with a flat top surface with a head angle of approximately 82. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive provides good control during installation.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Coarse thread
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Phillips flat machine screws zinc: A countersunk head with a flat top surface with a head angle of approximately 82. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive provides good control during installation.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Coarse thread
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Accepts standard flat blade screwdrivers. Machine screws have a uniform diameter the entire length of the shaft and are used to fasten machine components, appliances and more.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Flat blade (slotted) screwdriver
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has A Rounded Top Surface and A Flat Bearing Surface. Combo Drive Accepts Phillips and Standard Blade Screwdrivers. Often Used When A Fastener Is Expected To Be Driven and Backed Out Several Times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
A Low Carbon 6 Sided Internally Threaded Fastener. Features Include Flat Tops and Chamfered Corners. Designed Specifically To Be Used with Machine Screws.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Coarse thread
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has A Rounded Top Surface and A Flat Bearing Surface. Combo Drive Accepts Phillips and Standard Blade Screwdrivers. Often Used When A Fastener Is Expected To Be Driven and Backed Out Several Times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has A Rounded Top Surface and A Flat Bearing Surface. Combo Drive Accepts Phillips and Standard Blade Screwdrivers. Often Used When A Fastener Is Expected To Be Driven and Backed Out Several Times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Has a rounded top surface and a flat bearing surface. Combo Drive accepts Phillips and Standard Blade Screwdrivers. Often used when a fastener is expected to be driven and backed out several times.
- Zinc plated
- Material: steel
- Sold in packs of 100
- Use Phillips or standard blade screwdrivers
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
Prime Line Ms, Met, Pan Hd, Phil Dr, Grade A2-70 Ss,Package Of 10. Size: M6-1.0 X 60mm. Pan Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 7985. Mfg #9131667
- Size: M6-1.0 X 60mm
- Pan Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws, Flat Hd, Phps Dr, -20 Zc, Package Of 100. Size: 1/4 Inch-20 X 1/2 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9001740
- Size: 1/4 Inch-20 X 1/2 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws, Idt Hex Hd, Phps Dr, #10-24 Grd 18-8 Ss, Package Of 25. Size: #10-24 X 1/2 Inch. Indented Hex Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9012822
- Size: #10-24 X 1/2 Inch
- Indented Hex Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mach, Flat Head, Phillips , M4, Ss, Package Of 10. Size: M4-0.7 X 14mm. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 965. Mfg #9121156
- Size: M4-0.7 X 14mm
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Machine Screws, Stainless Steel Flat Head, Phillips Drive. Size: M2.5-0.45 X 10mm. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 965. Mfg #9120799
- Size: M2.5-0.45 X 10mm
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws,Flat Hd, Phps Dr, 25mm, Grd A2-70 Ss , Package Of 10. Size: M8-1.25 X 25mm. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 965. Mfg #9121740
- Size: M8-1.25 X 25mm
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
License Plate Bolts, Rh, Slot Dr, 1/4 In-20 X 5/8 In, Zc Sl, Package Of 4. Size: 1/4 Inch-20 X 5/8 Inch. Round Head, Slotted Drive. Used To Attache License Plate To Vehicle. Machine Screw Threads. Installs Into Threaded Hole Or Can Be Used With Nuts (Not Included). Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9054052
- Size: 1/4 Inch-20 X 5/8 Inch
- Round Head, Slotted Drive
- Used To Attache License Plate To Vehicle
- Machine Screw Threads
Assortment contains #6, #8 and #10 diameter Phillips pan head machine screws, nuts and washers. Pan heads have wide heads, a flat bearing surface and a slightly domed top surface. Length of pan head machine screws are measured from underneath the head to the point of the screw. Use standard Phillips screwdriver.
- Kit contains the following 750-pieces of Phillips pan head machine screws zinc plated (50-pieces of each): 6-32 x 1/4, 6-32 x 1/2, 6-32 x 3/4, 6-32 x 1, 8-32 x 1/4, 8-32 x 1/2, 8-32 x 3/4, 8-32 x 1, 10-32 x 1/4, 10-32 x 1/2, 10-32 x 3/4, 10-32 x 1, 10-32 x 1 1/4, 10-32 x 1 1/2, 10-32 x 2
- Kit contains the following 150-pieces of hex machine screw nuts zinc plated (50-pieces of each): 6-32 (5/16 x 7/64) 8-32 (11/32 x 1/8) 10-32 (3/8 x 1/8)
- Kit contains the following 300-pieces of washers zinc plated (50-pieces of each): #6 SAE flat washers zinc #8 SAE flat washers zinc #10 SAE flat washers zinc #6 external tooth lock washers zinc #8 external tooth lock washers zinc #10 external tooth lock washers zinc
- 18 in. W x 12 in. D metal case for easy storage
- Pair with corresponding nut and washer in like finishes
- Use standard Phillips screwdriver
- Material: steel zinc plated for all items
Prime Line Ms, Flat Hd, Phil Dr, -20grade 18-8 Ss, Package Of 50. Size: 1/4 Inch-20 X 3/4 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9001821
- Size: 1/4 Inch-20 X 3/4 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Machine Screws, #12-24 X 5/8 in. Stainless Steel Round Hd, Phil/Slot Com. (25-Pack). Size: #12-24 X 5/8 Inch. Round Head, Phillips/Slotted Combination Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9004937
- Size: #12-24 X 5/8 Inch
- Round Head, Phillips/Slotted Combination Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Machine Screws, #20 Stainless Steel Flat Hd, Phillips Dr. Size: 1/4 Inch-20 X 2 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9002013
- Size: 1/4 Inch-20 X 2 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Pan head machine screws have wide heads, a flat bearing surface and a slightly domed top surface. Machine screws are used with nuts or screwed directly into a tapped hole to fasten components together. Length of pan head machine screws are measured from underneath the head to the point of the screw. Use standard Phillips screwdriver.
- Kit contains the following 600-pieces of metric Phillips pan head machine screws (25-pieces of each): M3-.5 x 4 M3-.5 x 6 M3-.5 x 8 M3-.5 x 10 M3-.5 x 12 M3-.5 x 16 M4-.7 x 6 M4-.7 x 8 M4-.7 x 10 M4-.7 x 12 M4-.7 x 16 M4-.7 x 20 M5-.8 x 8 M5-.8 x 10 M5-.8 x 12 M5-.8 x 16 M5-.8 x 20 M5-.8 x 25 M6-1.0 x 10 M6-1.0 x 12 M6-1.0 x 16 M6-1.0 x 20 M6-1.0 x 25 M6-1.0 x 30
- Material: steel zinc plated
- Use standard Phillips screwdriver
- 18 in. W x 12 in. D metal tray for easy storage
- Pair with corresponding nut and washer in like finishes
- Common project applications: electronics, license plates, electrical boxes, switch plates, furniture
- DIN 7985A
Prime Line Mach, Flat Head, Phillips , Zinc, Package Of 100. Size: #4-40 X 1-1/4 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9000386
- Size: #4-40 X 1-1/4 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime LineMs, Met, Pan Hd, Phil Dr, Grade A2-70 Ss,Package Of 10. Size: M6-1.0 X 18mm. Pan Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 7985. Mfg #9131584
- Size: M6-1.0 X 18mm
- Pan Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Machine Screws, #10 Stainless Steel Oval Hd, Phillips Dr. (25-Pack). Size: #10-32 X 3/4 Inch. Oval Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Fine, Thread Class: Unf-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9010827
- Size: #10-32 X 3/4 Inch
- Oval Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Ms, Rh, Phil/Slot Comb Dr, #8-32 X ., Solid Brass,Package Of 100. Size: #8-32 X 2 Inch. Round Head, Phillips/Slotted Combination Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3. Mfg #9003894
- Size: #8-32 X 2 Inch
- Round Head, Phillips/Slotted Combination Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Oval head machine screws are conical with a domed top and tapers underneath to 80 degree to 82 degree . Machine screws are used with nuts or screwed directly into a tapped hole to fasten components together. Length of oval head is measured from edge of head (where countersink meets dome) to the point of the screw. Use standard Phillips screwdriver.
- Kit contains the following 600-pieces of 18-8 stainless steel Phillips oval head machine screws (25-pieces of each): 6-32 x 1/2, 6-32 x 3/4, 6-32 x 1, 8-32 x 1/2, 8-32 x 3/4, 8-32 x 1, 8-32 x 1 1/4, 8-32 x 1 1/2, 10-24 x 3/4, 10-24 x 1, 10-24 x 1 1/4, 10-24 x 1 1/2, 10-24 x 2, 1/4-20 x 3/4, 1/4-20 x 1, 1/4-20 x 1 1/4, 1/4-20 x 1 1/2, 1/4-20 x 2, 1/4-20 x 3, 10-32 x 3/4, 10-32 x 1, 10-32 x 1 1/4, 10-32 x 1 1/2, 10-32 x 2
- Material: 18-8 stainless steel provides long-lasting corrosion resistance
- Use standard Phillips screwdriver
- 18 in. W x 12 in. D metal case for easy storage
- Pair with corresponding nut and washer in like finishes
Prime Line Machine Sws, One-Way, Rh, #8-32 X 3/4 In, Zc Sl, Package Of 100. Size: #8-32 X 3/4 Inch. Round Head. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9014363
- Size: #8-32 X 3/4 Inch
- Round Head
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws, Flat Hd, Phps Dr, -201 In, Grd 18-8 Ss, Package Of 25. Size: 1/4 Inch-20 X 1 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9001853
- Size: 1/4 Inch-20 X 1 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws, Flat Hd, Phps Dr, #2-56, Grd 18-8 Ss, Package Of 25. Size: #2-56 X 1/4 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9000225
- Size: #2-56 X 1/4 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mhn Srws, Flat Hd, Phps Dr, -24, Grd 18-8 Ss, Package Of 10. Size: 5/16 Inch-24 X 3/4 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9002182
- Size: 5/16 Inch-24 X 3/4 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mach,Pan, Phillips , Ss, Package Of 25. Size: #10-32 X 3/4 Inch. Pan Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Fine, Thread Class: Unf-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9129311
- Size: #10-32 X 3/4 Inch
- Pan Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Machine Screws, Stainless Steel #12-24 X 5/8 in. Flat Hd, Phillips Dr. (100-Count). Size: #12-24 X 5/8 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9001557
- Size: #12-24 X 5/8 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Ms, Met, Flat Hd, Phil Dr, Grade A2-70 Ss, Package Of 5. Size: M5-0.8 X 80mm. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 965. Mfg #9121445
- Size: M5-0.8 X 80mm
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Hex head machine screws have 6 flat sides and a flat bearing surface. Machine screws are used with nuts or screwed directly into a tapped hole to fasten components together. Length of hex head machine screws are measured from underneath the head to the point of the screw.
- Kit contains the following 600-pieces of external hex head machine screws zinc plated (25-pieces of each): 6-32 x 1/2, 6-32 x 3/4, 6-32 x 1, 8-32 x 1/2, 8-32 x 3/4, 8-32 x 1, 8-32 x 1 1/4, 8-32 x 1 1/2, 10-32 x 3/4, 10-32 x 1, 10-32 x 1 1/4, 10-32 x 1 1/2, 10-32 x 2, 10-24 x 3/4, 10-24 x 1, 10-24 x 1 1/4, 10-24 x 1 1/2, 10-24 x 2, 1/4-20 x 3/4, 1/4-20 x 1, 1/4-20 x 1 1/4, 1/4-20 x 1 1/2, 1/4-20 x 2, 1/4-20 x 3
- Use appropriate hex driver size for installation as follows: #6 diameter use 1/4 in. #8 diameter use 1/4 in. #10 diameter use 5/16 in., 1/4 in. Dia use 3/8 in.
- Material: steel zinc plated
- 18 in. W x 12 in. D metal tray for easy storage
Prime Line Cb, 5/16 In.-18 X 4 In., A307 Gav Sl,Package Of 25. Size: 1/4 Inch-20 X 1-1/4 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9001897
- Size: 1/4 Inch-20 X 1-1/4 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Machine Screws, Flat Head, Phillips Drive, M4-0.7 X 18MM, A2-70, Package Of 10. Size: M4-0.7 X 18mm. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: 6g, Point Style: Blunt. Specification(S) Met: Din 965. Stainless Steel. Mfg #9121170
- Size: M4-0.7 X 18mm
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime LineMachine Screws, Truss Hd, Phil/ Slot Com, #8 1zinc. Size: #8-32 X 1-5/8 Inch. Truss Head, Phillips/Slotted Combination Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9006894
- Size: #8-32 X 1-5/8 Inch
- Truss Head, Phillips/Slotted Combination Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Mach, Oval Head, Phillips , Ss,Package Of 20. Size: #10-24 X 2 Inch. Oval Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Asme B1.1. Mfg #9011093
- Size: #10-24 X 2 Inch
- Oval Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances
Prime Line Ms, Flat Hd, Phil Dr, #8-32 X 1- Zc Stl, Package Of 75. Size: #8-32 X 1-1/2 Inch. Flat Head, Phillips Drive. Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size. Often Used In Machinery & Appliances. Nuts And Washers Not Included. Thread Type: Coarse, Thread Class: Unc-2a, Point Style: Blunt. Specification(S) Met: Asme B18.6.3 & Sae J82. Mfg #9000909
- Size: #8-32 X 1-1/2 Inch
- Flat Head, Phillips Drive
- Use With Nuts Or Pre-Threaded Holes Of The Same Diameter & Thread Size
- Often Used In Machinery & Appliances