Searched for "31162800"
Shelf support for shelves. In cabinets, vanities and medicine cabinets. Usually determined by the peg hole size.
- Will hold 1/2 in. shelves
- White
- Will hold shelves of different materials
- Made of plastic
- Use maximum clips required
- .
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 7/16 diameter holes. It includes one spring-loaded Prime-Line part N 6545 top bi-fold pivot with 7/16 inch base and 3/8 inch diameter pivot cap, one spring-loaded 7/8 inch diameter Prime-Line part N 6544 top roller guide with a 7/16 inch diameter base, one pair of door surface aligners , one Prime-Line part N 6696 jamb and floor mount pivot bracket, one Prime-Line part N 6696 adjustable bottom pivot with a 7/16 inch diameter base, and one Prime-Line part N 6543 bottom pivot with an adjustable self-lubricating plastic bushing. These repair parts are used on bi-fold doors manufactured by Acme, Cox, Stanley and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 inch thick and up to 50 lbs.
- Includes one Prime-Line part N 6545 bi-fold top mount pivot which has a 7/16 inch diameter spring-loaded steel base and 3/8 inch diameter plastic cap
- One spring-loaded Prime-Line part N 6544 bi-fold door top roller guide with a 7/8inch plastic wheel and a 7/16 inch diam. spring-loaded steel base
- One N-6538 pair of non-handed bi-fold door surface aligners to keep the doors aligned and tightly closed. Constructed of steel
- One Prime-Line part N-6696 bottom pivot constructed of a 7/16 inch diameter plastic base with a height-adjusting grooved cone-shaped steel pivot
- Includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, that is a steel base with an adjustable self-lubricating plastic bushing
- Installation fasteners included
- Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
The Everbilt 12 in. shelving support brackets (2-pack) are exclusively designed for the Everbilt fixed-mount system for installing ventilated wire shelving. Durably made of steel with a white coated finish, these brackets are designed to use with any 12 in. ventilated shelf and any 16 in ventilated shelf when used in a hanging application. Attach the shelving with wall clips (both sold separately) and then add the shelf support brackets for a sturdy storage area.
- Works with fixed mount shelving system
- Brackets can be spaced up to 36 in. apart, space closer together for additional support
- Solid steel construction for strength and stability with white coated finish
- Use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a closet hanging application
- All hardware included for easy installation
The Everbilt Fixed Rod Shelf Wall Bracket is designed support the front lip of any Everbilt Fixed Rod ventilated wire shelf. For use in a wall-to-wall or wall-to-open application. Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately). All hardware included for installation. Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
- Works with Everbilt Fixed Rod Shelving
- Supports front lip of shelf where it meets the side wall
- Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately)
- White Finish
- Includes 2 wall brackets and mounting hardware
- Hardware included
- Designed to support the front of ventilated wire shelving
- Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
Spring loaded top guide and pivot. 7/16 in. Dia cap with 7/16 in. Dia nylon base. Used by Johnson and others.
- Spring-loaded
- Nylon roller is 7/8 in. Dia
- White in color
- Fits Kenna frame and others
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This bi-fold door repair kit includes replacement parts to repair one 2-panel set of hinged bi-folding doors. The plastic bases of the pivots and guide measure 3/8 inch in outside diameter, and the guide features a 7/8 inch outside diameter plastic wheel. A steel bottom pivot bracket and door aligner are also included, together with a wooden knob that can be finished in stain or paint. The snugger has a white plastic body with a steel spring, and the fasteners for all components are included with each package. Hinges are not included with this kit. These components are used by a variety of bi-folding closet door manufacturers. Tip: In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provides for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening.
- REPAIR BI-FOLDING DOORS – Easily repair one set of wood or metal hinged bi-folding doors with this all-inclusive DIY kit. For use with 3/8 inch outside diameter pivots and guides in a 7/8 inch wide bi-fold door track.
- INCLUDES – This bi-fold door repair kit includes top and bottom pivots, 7/8 inch plastic guide wheel, steel bottom pivot bracket, wooden knob, white plastic snugger with steel spring, steel aligners and fasteners for all components. Please note: Track and  hinges are not included.
- CUSTOMIZABLE WOODEN KNOB – The kit includes an unfinished wooden knob that can be stained or painted to match existing finishes.
- EASY AND ECONOMICAL – With everything needed to repair one 2-panel set of hinged bi-folding doors, you can quickly and easily fix an existing door rather than purchase a new one.
- INSTALLATION TIP – In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provide for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening. If you need to repair both pairs (or all 4 doors), please purchase two kits.
- Repair kit contains parts for a single set of bi-fold doors
- Must purchase 2 sets if you need to replace both pairs (4 doors)
- For further dimensional information, please see the line drawing
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by float away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
This is a top mount bi-fold door pivot that is typically used on Alliance bi-fold doors. The spring loaded 1/4 in. steel pin inserts into a pre-drilled hole in the door and a top bracket above, creating a pivot point for your bi-fold door. Each steel pin is self-adjusting and features a mold injected clear plastic base. No fasteners are required for installation, but a soft mallet can be used with caution.
- Used by alliance and a wide variety of bi-fold door manufacturers
- Top mounted design
- 3/8 in. Dia nylon base
- Steel base with nylon cap
- No fasteners required
- Grooved cone shaped pivot
- Please refer to the line art drawing and compare with your original item before purchasing
Designed for larger projects, the Everbilt Fixed Mount Concrete/Stud Wall Clips (Contractor 12PK) is designed to install on the back rod of ventilated wire shelving in a fixed mount application to prevent the shelf from popping up at the rear. The clip is designed to work with the wall clip to hold the shelf firmly in place. Metal screws and plastic anchors are included for installing the down clips on drywall, wood studs or concrete.
- Clips keep ventilated wire shelving secured in place
- For use with fixed mount installations
- Hardware for drywall, concrete and wood stud installation
- White PVC plastic construction for durability
- Set includes 12 clips with anchors and screws
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
For Out swinging Storm Doors 1 in. To 1-1/4 in. Thick. Interior Locking Mechanism. Complete with Strike and Installation Screws. 1-3/4 in. Hole Centers. Black. The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliable performance
- Durable construction
- Style is attracting
This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an offset adjustable top hung, side mount design. This style roller is used on Acme and similar styled bypass doors that are 3/4 in. to 1-3/8 in. thick.
- Used on bypass, closet or other wardrobe doors
- Adjustable top hung, side mount design
- 1/4 in. offset steel bracket
- Stamped steel bracket and nylon roller
- Fits 3/4 in. to 1-3/8 in. thick doors
- Fits acme bypass doors
- Fasteners are not included
- For further dimensional information, please see the line drawing
The ClosetMaid Shelf End Brackets are exclusively designed for the ClosetMaid traditional fixed-mount system for installing ventilated wire shelving. Used to secure the end of wire shelving to the wall on the sides. Comes in a carton of 600 brackets.
- Plastic anchors required (not included)
- Screws required (not included)
- For stud or wood-mount applications
- Can be used for drywall applications with an anchor and screw (not included)
- Material: plastic
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
The balance number will be stamped or printed on the metal channel which determines the spring tension. The length of the balance is determined by measuring the metal channel only and do not include the plastic end bracket guides in the measurement. This balance channel width is 9/16 in. x 5/8 in. D. Make sure your balance matches the specs of this balance before ordering as well as any specific end brackets.
- Aluminum metal channel for strength
- Designed for longer life when you change balances on both sides of the sash
- Provides smoother operation when you change balances on both sides of the sash
- For Cross Eastern, Penco, Miller, Remington and other brands of windows
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
Designed for larger jobs, the Everbilt Fixed Mount Metal U clips (48PK) is designed to securely mount the back of your ventilated wire shelving to a wall. Designed for use with the fixed mount installation method when additional support is required. The metal clips lock the back of the shelving into place, while metal shelf support brackets (sold separately) attach to the front of the shelving. For safe support, use 1-shelf clip every 12 in. and 1 at each end of the shelf.
- Package includes 48 clips, 96 anchors and 96 screws
- Clips secure a wire shelf to concrete or drywall by locking the back of the shelving into place
- Sturdy metal construction offers maximum support
- Use 1-shelf clip every 12 in. and 1 at each end of the shelf
- Designed for use with all Everbilt ventilated shelving
Fits 1/4" Pin.
- Made of high-quality plastic for durability
- Features a neat brass finish
- Designed to fit a 1/4 in. pin
- Suitable for bi-fold doors
Use the ClosetMaid vinyl end caps to provide protection from the cut end of ventilated wire shelving in your closet or storage application. 2 different cap sizes are included to help you accommodate most types of wardrobe shelving. Includes 10 small and 4 large caps, enough for 2 shelves. The end caps effectively cover the rough edges caused by trimming the end of the wires.
- Includes 10 small and 4 large caps
- Soft plastic material protects clothes from snagging on cut ends of shelving
- Protects walls when a shelf is installed close to the edge
- Slides onto end of shelf
- No tools needed
- Use with ClosetMaid Shelf and Rod wire ventilated shelves
- Small End Cap dimensions: .20 in. H x .20 in. W x .20 in. D
- Large End Cap dimensions: .25 in. H x .4 in. W x .4 in. D
- Combining ClosetMaid branded products with third party components or products will void the ClosetMaid manufacturer's warranty.
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
This closet shelf and pole support bracket is constructed from steel. It comes finished in white and is used with 12 in., shelves. This type of bracket supports a 1-3/8 in., pole. Can be used for wood or wire shelving.
- Pole supports for standard 1-3/8 in wood pole
- White powdered coated steel prevents rust and corrosion
- Steel construction
- Supports 12 in., deep shelves
- 10 x 1-1/4 in., pan head tapping screws 4 pcs, 10 x 3/4 in., pan head tapping screws included
- For further dimensional information, please see the line drawing
This screen door tension roller features a nylon, center grooved wheel. It comes affixed to a heat treated high tension steel spring. This style of roller is used by Metal Industries.
- Nylon wheel with center groove 1 in. O.D
- Used by metal industries
- Used by several manufacturers
- Affixed to high tension steel spring
- Provides smooth operation
- For further dimensional information, please see the line drawing
16 Gauge (0.050) Lacquer Coated and Salt Spray Tested. Pre-Drilled, Screws Included. Size: 6" X 34", Finish: Aluminum, Material: Aluminum.
- 6" Height
- 34" Width
- Satin Aluminum Finish
- Aluminum Base
- 16 Gauge (0.050)
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
8 in. x 10 in. White Painted Enamel Finish Steel Shelf Brackets. Commonly used in garages, inside pantries, and other areas where sturdy shelving is needed. Painted with white enamel paint to reduce corrosion. (2-Pack).
- 8 in. x 10 in. steel bracket
- Hardware not included
- White enamel
- 2 per package
- Screws with anchors are recommended for attaching this item
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This 1/4 in. pivot rod is constructed from steel and zinc plated. It features an adjustable pivot and contains a 3/8 in. nylon cap. It has a length of 5-13/16 in. For steel framed bi-folding doors.
- 3/8 in. outside diameter nylon cap
- 1/4 in. outside diameter x 5-13/16 in. threaded steel pin
- Bottom adjustment pivot
- Fits benchmark and a variety of other door brands
- Installation fasteners included
- For further dimensional information, please see the line drawing
This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.
- Steel construction
- Black plastic retainer sleeve
- Adjustable design
- Used by float away steel framed doors
- 5-1/8 in. rod
- For further dimensional information, please see the line drawing
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
The color of the bearing determines the sash weight range of the balance. The length of the balance is determined by measuring the length of the tube ONLY, and do not include the bearing or rod in the measurement. The rod is a standard rod which extends beyond the tube by 5/8 in. The tube diameter is 3/8 in. Make sure your balance matches the specs of this balance before ordering. Specific ends and accessories should also be ordered and replaced with new balances.
- Always replace both balances on each sash to insure proper operation
- You will need to remove the old balance from the window in order to determine the replacement
- Color bearing determines correct sash weight range, and is needed for correct replacement
- Replace balance ends and accessories for best results
Use these shelf clips to mount ClosetMaid ventilated wire shelving to a wall when you are installing a closet system using the economical traditional fixed-mount installation method. The clips lock the back of the shelving into place and metal shelf supports (sold separately) hold the front of the shelf. Use 1-shelf clip every 12 in. and 1 at each end of the shelf.
- Includes clips, anchors, and screws
- Secures a wire shelf to concrete or drywall
- Sturdy metal construction
- Use with other hardware in closetmaid fixed mount wire shelf installations
- Hardware dimensions: 8.3 in. H x 1.35 in. W x 1.35 in. D
The balance number will be stamped or printed on the metal channel which determines the spring tension. The length of the balance is determined by measuring the metal channel only and do not include the plastic end bracket guides in the measurement. This balance channel width is 9/16 in. x 5/8 in. D. Make sure your balance matches the specs of this balance before ordering as well as any specific end brackets.
- Aluminum metal channel for strength
- Designed for longer life when you change balances on both sides of the sash
- Provides smoother operation when you change balances on both sides of the sash
- For Cross Eastern, Penco, Miller, Remington and other brands of windows
Tell Manufacturing's 8400B is a Grade 1 vertical rod exit device for commercial applications. The 8400B series is surface mounted and will fit on doors 28 in. to 36 in. W, which is easily field sizable. This vertical rod panic will work on doors 1-3/4 in. to 2 in. T. The vertical rod panic has an aluminum finish and complies ANSI A156.3.
- Easy installation
- Pullman latch bolts top and bottom
- Stainless steel 1/2 in. throw
- Works on wood or metal doors
- Voltage 115-Volt
- Cycle 60 Hz
- Maximum static pressure 100 PA
- Daisy chain: yes
- Stackable: yes, 6 units
- Product weight: 23.1 lbs.
- Boxed weight: 25.3 lbs.
- Size: 11.4 in. H x 18.5 in. W x 23.2 in. D
- Wheel speed RPM: 1200 RPM to 1580 RPM
- Attached cord 15 ft. 14 AWG
The balance number will be stamped or printed on the metal channel which determines the spring tension. The length of the balance is determined by measuring the metal channel only and do not include the plastic end bracket guides in the measurement. This balance channel width is 9/16 in. x 5/8 in. D. Make sure your balance matches the specs of this balance before ordering as well as any specific end brackets.
- Aluminum metal channel for strength
- Designed for longer life when you change balances on both sides of the sash
- Provides smoother operation when you change balances on both sides of the sash
- For seasonshield, alenco and other brands of windows
The balance number will be stamped or printed on the metal channel which determines the spring tension. The length of the balance is determined by measuring the metal channel only and do not include the plastic end bracket guides in the measurement. This balance channel width is 9/16 in. x 5/8 in. D. Make sure your balance matches the specs of this balance before ordering as well as any specific end brackets.
- Aluminum metal channel for strength
- Designed for longer life when you change balances on both sides of the sash
- Provides smoother operation when you change balances on both sides of the sash
- For cross eastern, penco, miller, Remington and other brands of windows
This balance is for tilt windows. The color of the bearing determines the sash weight range of the balance. The length of the balance is determined by measuring the length of the tube ONLY, and do not include the bearing or rod in the measurement. The rod is a standard rod which extends beyond the tube. The tube diameter is 9/16 in. Make sure your balance matches the specs of this balance before ordering. Specific ends and accessories should also be ordered and replaced with new balances.
- Always replace both balances on each sash to insure proper operation
- You will need to remove the old balance from the window in order to determine the replacement
- Color bearing determines correct sash weight range, and is needed for correct replacement
- Replace balance ends and accessories for best results