Searched for "31162800"
Shelf support for shelves. In cabinets, vanities and medicine cabinets. Usually determined by the peg hole size.
- Will hold 1/2 in. shelves
- White
- Will hold shelves of different materials
- Made of plastic
- Use maximum clips required
- .
Wardrobe Closet Floor Door Guide. HDPE Material. 1-Piece Solid Nylon with Fixed Guides For 1-3/8 in. By-Passing Doors.
- Floor door guide
- HDPE
- Clear
- Fits 1-3/8 in. by-passing doors
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This bi-fold door repair kit includes replacement parts to repair one 2-panel set of hinged bi-folding doors. The plastic bases of the pivots and guide measure 3/8 inch in outside diameter, and the guide features a 7/8 inch outside diameter plastic wheel. A steel bottom pivot bracket and door aligner are also included, together with a wooden knob that can be finished in stain or paint. The snugger has a white plastic body with a steel spring, and the fasteners for all components are included with each package. Hinges are not included with this kit. These components are used by a variety of bi-folding closet door manufacturers. Tip: In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provides for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening.
- REPAIR BI-FOLDING DOORS – Easily repair one set of wood or metal hinged bi-folding doors with this all-inclusive DIY kit. For use with 3/8 inch outside diameter pivots and guides in a 7/8 inch wide bi-fold door track.
- INCLUDES – This bi-fold door repair kit includes top and bottom pivots, 7/8 inch plastic guide wheel, steel bottom pivot bracket, wooden knob, white plastic snugger with steel spring, steel aligners and fasteners for all components. Please note: Track and  hinges are not included.
- CUSTOMIZABLE WOODEN KNOB – The kit includes an unfinished wooden knob that can be stained or painted to match existing finishes.
- EASY AND ECONOMICAL – With everything needed to repair one 2-panel set of hinged bi-folding doors, you can quickly and easily fix an existing door rather than purchase a new one.
- INSTALLATION TIP – In a typical bi-folding closet opening, a pair of bi-folding doors is hung on the left side of the opening and a second pair of bi-folding doors is hung on the right side of the opening (a total of 4 narrow doors hung in left and right pairs). The contents of this kit provide for the repair of only one of those pairs, or for 2 of the 4 doors that are hung in a single opening. If you need to repair both pairs (or all 4 doors), please purchase two kits.
- Repair kit contains parts for a single set of bi-fold doors
- Must purchase 2 sets if you need to replace both pairs (4 doors)
- For further dimensional information, please see the line drawing
Designed for larger projects, the Everbilt Fixed Mount Concrete/Stud Wall Clips (Contractor 12PK) is designed to install on the back rod of ventilated wire shelving in a fixed mount application to prevent the shelf from popping up at the rear. The clip is designed to work with the wall clip to hold the shelf firmly in place. Metal screws and plastic anchors are included for installing the down clips on drywall, wood studs or concrete.
- Clips keep ventilated wire shelving secured in place
- For use with fixed mount installations
- Hardware for drywall, concrete and wood stud installation
- White PVC plastic construction for durability
- Set includes 12 clips with anchors and screws
Spring loaded top guide and pivot. 7/16 in. Dia cap with 7/16 in. Dia nylon base. Used by Johnson and others.
- Spring-loaded
- Nylon roller is 7/8 in. Dia
- White in color
- Fits Kenna frame and others
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
The Everbilt 12 in. shelving support brackets (2-pack) are exclusively designed for the Everbilt fixed-mount system for installing ventilated wire shelving. Durably made of steel with a white coated finish, these brackets are designed to use with any 12 in. ventilated shelf and any 16 in ventilated shelf when used in a hanging application. Attach the shelving with wall clips (both sold separately) and then add the shelf support brackets for a sturdy storage area.
- Works with fixed mount shelving system
- Brackets can be spaced up to 36 in. apart, space closer together for additional support
- Solid steel construction for strength and stability with white coated finish
- Use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a closet hanging application
- All hardware included for easy installation
The Everbilt Fixed Rod Shelf Wall Bracket is designed support the front lip of any Everbilt Fixed Rod ventilated wire shelf. For use in a wall-to-wall or wall-to-open application. Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately). All hardware included for installation. Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
- Works with Everbilt Fixed Rod Shelving
- Supports front lip of shelf where it meets the side wall
- Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately)
- White Finish
- Includes 2 wall brackets and mounting hardware
- Hardware included
- Designed to support the front of ventilated wire shelving
- Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H
This guide wheel is constructed from nylon and has a diameter of 7/8 in. It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 in. to 1-3/8 in. thick. Easy to install.
- Spring-loaded steel base
- Top mounted
- Nylon wheel
- 7/8 in. outside diameter wheel
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
These bi-fold closet door top pivot and top guide are constructed of plastic and come white in color. The outside diameter of these guides measure 3/8 in. and the base diameter measures 3/8 in. x 1 in. H. These guides are designed for use on the primary pivoting leaf of a bi-folding pair of doors, as well as to slide effortlessly within the bi-fold track above the doors. Bi-fold closet door top pivots and top guides like these are easy to install and they are used by a variety of bi-fold door manufacturers.
- Used to replace damaged or missing bi-fold door top pivots and top guides
- 3/8 in. outside diameter x 5/8 in. tall top guide and shaft with 3/8 in. outside diameter x 1 in. shaft
- White in color
- Nylon construction
- Fits 1 in. to 1-3/8 in. thick doors
The ClosetMaid 4-Gauge pole clips are exclusively designed for the ClosetMaid traditional fixed-mount system for installing ventilated wire shelving. For use with shelf support poles when installing multiple levels of stacked shelves. Comes in a carton of 1000 clips.
- Provides side wall support
- Supports the front lip of shelving where it meets the side wall
- Required every 36 in. of shelving
- For concrete or stud installation
- Can be used for dry wall applications with an anchor and screw (sold separately)
- Installation hardware sold separately
- Material: resin
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This bi-fold door guide wheel is constructed from nylon and comes affixed to a steel base. It features a top mount spring-loaded self-adjusting design. This guide wheel fits 1 in. to 1-3/8 in. thick bi-fold doors up to 30 lbs. each.
- Nylon wheel, steel base
- Top mount spring-loaded design
- White in color
- Fits 1 in. to 1-3/8 in. thick bi-fold doors
- 30 lbs., carrying capacity
- For further dimensional information, please see the line drawing
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
This bi-fold door pivot has a nylon constructed base with an adjustable steel pivot. It features a bottom mounted design with a grooved tip. This is a perfect replacement part as it is used by a variety of wardrobe manufacturers.
- Used by a variety of bi-fold door manufacturers
- Bottom mount
- 3/8 in. Dia base
- Steel pivot screw and nylon base
- Pack of 4
- No tools required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
This closet shelf and pole support bracket is constructed from steel. It comes finished in white and is used with 12 in., shelves. This type of bracket supports a 1-3/8 in., pole. Can be used for wood or wire shelving.
- Pole supports for standard 1-3/8 in wood pole
- White powdered coated steel prevents rust and corrosion
- Steel construction
- Supports 12 in., deep shelves
- 10 x 1-1/4 in., pan head tapping screws 4 pcs, 10 x 3/4 in., pan head tapping screws included
- For further dimensional information, please see the line drawing
Fits 1/4" Pin.
- Made of high-quality plastic for durability
- Features a neat brass finish
- Designed to fit a 1/4 in. pin
- Suitable for bi-fold doors
This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 7/16 diameter holes. It includes one spring-loaded Prime-Line part N 6545 top bi-fold pivot with 7/16 inch base and 3/8 inch diameter pivot cap, one spring-loaded 7/8 inch diameter Prime-Line part N 6544 top roller guide with a 7/16 inch diameter base, one pair of door surface aligners , one Prime-Line part N 6696 jamb and floor mount pivot bracket, one Prime-Line part N 6696 adjustable bottom pivot with a 7/16 inch diameter base, and one Prime-Line part N 6543 bottom pivot with an adjustable self-lubricating plastic bushing. These repair parts are used on bi-fold doors manufactured by Acme, Cox, Stanley and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 inch thick and up to 50 lbs.
- Includes one Prime-Line part N 6545 bi-fold top mount pivot which has a 7/16 inch diameter spring-loaded steel base and 3/8 inch diameter plastic cap
- One spring-loaded Prime-Line part N 6544 bi-fold door top roller guide with a 7/8inch plastic wheel and a 7/16 inch diam. spring-loaded steel base
- One N-6538 pair of non-handed bi-fold door surface aligners to keep the doors aligned and tightly closed. Constructed of steel
- One Prime-Line part N-6696 bottom pivot constructed of a 7/16 inch diameter plastic base with a height-adjusting grooved cone-shaped steel pivot
- Includes one Prime-Line part N 6543 jamb and floor mount pivot bracket, that is a steel base with an adjustable self-lubricating plastic bushing
- Installation fasteners included
- Phillips head screwdriver is required for installation
- For further dimensional information, please see the line drawing
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an offset adjustable top hung, side mount design. This style roller is used on Acme and similar styled bypass doors that are 3/4 in. to 1-3/8 in. thick.
- Used on bypass, closet or other wardrobe doors
- Adjustable top hung, side mount design
- 1/4 in. offset steel bracket
- Stamped steel bracket and nylon roller
- Fits 3/4 in. to 1-3/8 in. thick doors
- Fits acme bypass doors
- Fasteners are not included
- For further dimensional information, please see the line drawing
This bottom pivot has a 7/16 in. Dia nylon constructed base. It features a 1/4 in. Dia steel constructed tip with threaded adjustment as well as a steel pivot shaft. Fits Johnson and other similar styled doors.
- 1/4 in. outside diameter steel tip with threaded adjustment
- 7/16 in. outside diameter nylon base
- Bottom mount
- Finger tip adjustment
- Fits 1 in. to 1-3/8 in. thick doors
- For further dimensional information, please see the line drawing
This is a guide rod used in Benchmark bi-fold door systems. The 5/16 in. Dia, 5-1/4 in. L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in. nylon cap on the end.
- Used by benchmark bi-fold doors and a variety of other bi-fold door manufacturers
- Threaded with hex nut and washer for installation
- 3/8 in. cap and 5-1/4 in. length
- Steel rod and white nylon cap
- Easy to install
- Adjustable wrench may be required for installation
- For further dimensional information, please see the line drawing
- For further dimensional information, please see the line drawing
The 12 in. Contractor Grade Beddar Wood shim has quickly become a favorite to contractors. The contractor shims surpass pine or cedar alternatives in performance. These shims are simple to cut, resistant to splitting from nails and screws, break off cleanly, and are rot resistant.
- Split resistant
- Rot resistant
- Excellent snap
- Kiln dried
- Natural wood
By Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.
- Spring-loaded for self-adjustment and easy door removal
- 1/4 in. outside diameter x 5-1/2 in. steel pin with 3/8 in. outside diameter nylon cap
- Steel rod with plastic cap
- Fits slimfold brand doors
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This screen door tension roller features a nylon, center grooved wheel. It comes affixed to a heat treated high tension steel spring. This style of roller is used by Metal Industries.
- Nylon wheel with center groove 1 in. O.D
- Used by metal industries
- Used by several manufacturers
- Affixed to high tension steel spring
- Provides smooth operation
- For further dimensional information, please see the line drawing
Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
Designed for larger project, the Everbilt 12 in. shelving support brackets (12-pack) are exclusively designed for the Everbilt fixed-mount system for installing ventilated wire shelving. Durably made of steel with a white coated finish, these brackets are designed to use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a hanging application. Attach the shelving with wall clips (both sold separately) and then add the shelf support brackets for a sturdy storage area.
- Works with fixed mount shelving system
- Brackets can be spaced up to 36 in. apart, space closer together for additional support
- Solid steel construction for strength and stability with white coated finish
- Use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a closet hanging application
- All hardware included for easy installation
The balance number will be stamped or printed on the metal channel which determines the spring tension. The length of the balance is determined by measuring the metal channel only and do not include the plastic end bracket guides in the measurement. This balance channel width is 9/16 in. x 5/8 in. D. Make sure your balance matches the specs of this balance before ordering as well as any specific end brackets.
- Aluminum metal channel for strength
- Designed for longer life when you change balances on both sides of the sash
- Provides smoother operation when you change balances on both sides of the sash
- For cross eastern, penco, miller, Remington and other brands of windows
Designed for larger jobs, the Everbilt Fixed Mount Metal U clips (48PK) is designed to securely mount the back of your ventilated wire shelving to a wall. Designed for use with the fixed mount installation method when additional support is required. The metal clips lock the back of the shelving into place, while metal shelf support brackets (sold separately) attach to the front of the shelving. For safe support, use 1-shelf clip every 12 in. and 1 at each end of the shelf.
- Package includes 48 clips, 96 anchors and 96 screws
- Clips secure a wire shelf to concrete or drywall by locking the back of the shelving into place
- Sturdy metal construction offers maximum support
- Use 1-shelf clip every 12 in. and 1 at each end of the shelf
- Designed for use with all Everbilt ventilated shelving
Designed for larger projects, these Everbilt Fixed Mount Drywall Back Wall Clips (48PK) are designed to mount ventilated wire shelving to a back wall when you are installing a closet system using the traditional fixed-mount installation method into drywall. The clips anchor directly into the drywall and lock the back of the shelving into place. Use 1-shelf clip every 12 in. and 1 at each end of the shelf. Add shelf support brackets (sold separately) to hold the front of the shelf.
- For use when attaching shelving to drywall
- Locks back of shelf securely into place
- Use in traditional fixed mount applications
- Package includes 48 clips and hardware
- White Finish
Bi-Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This is a top mount bi-fold door pivot that is typically used on Alliance bi-fold doors. The spring loaded 1/4 in. steel pin inserts into a pre-drilled hole in the door and a top bracket above, creating a pivot point for your bi-fold door. Each steel pin is self-adjusting and features a mold injected clear plastic base. No fasteners are required for installation, but a soft mallet can be used with caution.
- Used by alliance and a wide variety of bi-fold door manufacturers
- Top mounted design
- 3/8 in. Dia nylon base
- Steel base with nylon cap
- No fasteners required
- Grooved cone shaped pivot
- Please refer to the line art drawing and compare with your original item before purchasing
By-Pass Closet Door Hardware Part. Repair doors like new. Replace exact part needed.
- Exact original replacement
- For specific brand doors
- Not a universal fit all type part
- Makes your doors operate like new
This is a window balance top sash guide. There is a specific size spec for this to get the proper replacement. Window brand name or age does not determine replacement.
- Non-Handed
- Reversible
- Plastic
- White
Can Be Easily Cut Down For Smaller Sizes. Used For Slimfold Bi-Fold Doors. Length: 6 Ft.
For sliding patio door screens. 2 roller assemblies on bottom of door. Specific size and type rollers needed.
- Replace both bottom rollers for smooth operation
- Standard rollers for light weight application
- Check for other worn parts
- Replacement track may be needed if rollers do not roller smoothly after replacement
These shelf brackets are constructed of stamped steel and come in a gray colored enamel finish. They feature a reinforced design which will support deep shelf boards.
- Used in residential and commercial applications, in storage rooms, closets, pantries, offices, and more
- 8 inch x 10 in
- Gray enamel finish
- Stamped steel construction
- Reinforced design supports deep shelf boards
- For further dimensional information, please see the line drawing
The Everbilt Regular Duty 8 ft. Closet Rod features a 3/4" diameter rod. The sturdy steel construction and smooth white finish allows hangers to slide freely. This rod is compatible with Adjustable and Fixed Mount Closet Systems. Perfect addition for closets and other areas where hanging items are needed. Rod can be cut to desired length.
- 8 ft. length
- 3/4" outside diameter
- Ideal for Regular Duty applications
- Can be cut to custom length
- Sturdy steel construction with smooth white coated finish
These shelf brackets are constructed of stamped steel and come in a gray colored enamel finish. They feature a reinforced design which will support deep shelf boards. Use these shelf support brackets for the installation of shelves in the home, office, garage and more.
- Used in residential and commercial applications, in storage rooms, closets, pantries, offices, and more
- For use in the home, office, garage and more
- Reinforced design supports deep shelf boards
- Stamped steel construction
- Gray enamel finish
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
This top guide pin assembly features a 7/16 in. Dia nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.
- 7/16 in. outside diameter nylon cap
- 9/32 in. outside diameter x 5-1/8 in. steel pin
- Includes black plastic retainer sleeve and coil spring
- Used by float away steel framed doors
- Includes tension spring
- For further dimensional information, please see the line drawing
This balance is for tilt windows. The color of the bearing determines the sash weight range of the balance. The length of the balance is determined by measuring the length of the tube ONLY, and do not include the bearing or rod in the measurement. The rod is a standard rod which extends beyond the tube. The tube diameter is 3/8 in. Make sure your balance matches the specs of this balance before ordering. Specific ends and accessories should also be ordered and replaced with new balances.
- Always replace both balances on each sash to insure proper operation
- You will need to remove the old balance from the window in order to determine the replacement
- Color bearing determines correct sash weight range, and is needed for correct replacement
- Replace balance ends and accessories for best results
Strybuc 6' Strybuc Bi-Fold Closet Door Track Kit For 2 Door Panels Includes hardware, fasteners and instructions For Bi-fold and wardrobe closets Direct replacement for SKU 905693 Mfg #8-562-6
- For 2 Door Panels
- Includes hardware, fasteners and instructions
- For Bi-fold and wardrobe closets
- Direct replacement for SKU 905693
Strybuc Strybuc Bi-Fold Door Floor Guide One Piece Construction For 1-3/8" thick Bi-Fold doors 4-1/4" center to center mounting hole spacing Direct replacement for SKU 838500 Mfg #8-208-4
- One Piece Construction
- For 1-3/8" thick Bi-Fold doors
- 4-1/4" center to center mounting hole spacing
- Direct replacement for SKU 838500
This is a window balance pivot bar. Used with spiral tube balances. There is a specific size spec for these.
- Die cast zinc
- Replace both sides of sash for better operation
- Non-handed
- Reversible
The color of the bearing determines the sash weight range of the balance. The length of the balance is determined by measuring the length of the tube ONLY, and do not include the bearing or rod in the measurement. The rod is a extended rod which extends beyond the tube by 2-5/8 in. The tube diameter is 9/16 in. Make sure your balance matches the specs of this balance before ordering. Specific ends and accessories should also be ordered and replaced with new balances.
- Always replace both balances on each sash to insure proper operation
- You will need to remove the old balance from the window in order to determine the replacement
- Color bearing determines correct sash weight range, and is needed for correct replacement
- Replace balance ends and accessories for best results