Searched for "40101700"
First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.
- OEM coil
- copper tubes
HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 2.5 ton size
- 208/240-Volt electrical
- 24-Volt controls and compatible with most 24-Volt stats
- Compatible with most 24-Volt stats
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2 ton fan coil piston
- 6kW electric heat
- 208/240v
- 24v controls
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- HX Series
- Horizontal Fan Coils (Uncased)
- Heat Pump or DX - With Electric Heat
- (Heat pump w/Heat requires kit # 942-1)
- Features:
- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat
- Metering Device: Piston
- For use with R22 or R410A refrigerant
- Dimensions (HxWxD): 10" x 43-1/4" x 21"
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- Shipped with 2.5 ton piston
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
Johnson Controls 2.5 Ton Vertical Cased Coil - 21.0" Cabinet Width
- 2.5 Ton
- Designed in the USA
- Vertical Cased
- 21.0" Cabinet Width
HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 3 ton
- 208/240-Volt electrical
- 24-Volt controls
- compatable with most 24-Volt stats
Johnson Controls 2 Ton Vertical Cased Coil - 17.5" Cabinet Width
- 2 Ton
- Designed in the USA
- Vertical Cased
- 17.5" Cabinet Width
First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.
- copper tube
- aluminum fin
Johnson Controls 3 Ton Vertical Cased Coil - 17.5" Cabinet Width
- 3 Ton
- Designed in the USA
- Vertical Cased
- 17.5" Cabinet Width
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Factory installed 5kW electric heat
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- PSC motor
- 120v
- 2 Pipe 3 row coil
- Right hand piping connections
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- low horizontal unit
- 400 cfm
- 2 pipe 3 row
- right hand piping connections
The GOODMAN CAPFA1818A6 is a cased A coil for use in upflow or downflow applications. The all-aluminum construction and advanced design of this coil improve its durability and heat transfer efficiency. The CAPFA evaporator coil is designed with a smaller size for use in space constrained areas without sacrificing efficiency. Whether you're replacing a failing coil or installing a new system, you can choose the CAPFA with confidence. GOODMAN pressure tests each coil twice before it leaves the factory and backs them with an excellent warranty.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21" depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Galvanized, leather grain-embossed finish
- Galvanized, leather grain-embossed finish
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Johnson Controls 4.0 Ton Vertical Cased Coil - 21.0" Cabinet Width
- 4.0 Ton
- Designed in the USA
- Vertical Cased
- 21.0" Cabinet Width
Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- With 2 ton piston
Cased Horizontal Slab.All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Johnson Controls 5.0 Ton Vertical Cased Coil - 24.5" Cabinet Width
- 5.0 Ton
- Designed in the USA
- Vertical Cased
- 24.5" Cabinet Width
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type)
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
Cased Painted Upflow/Downflow. All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Johnson Controls Coil
- MaxAlloy aluminum
- Durable Finish
- Easy installation
- XAFD48FBAN1