Hvac Coils
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2 ton fan coil piston
- 6kW electric heat
- 208/240v
- 24v controls
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- HX Series
- Horizontal Fan Coils (Uncased)
- Heat Pump or DX - With Electric Heat
- (Heat pump w/Heat requires kit # 942-1)
- Features:
- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat
- Metering Device: Piston
- For use with R22 or R410A refrigerant
- Dimensions (HxWxD): 10" x 43-1/4" x 21"
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- Shipped with 2.5 ton piston
HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 2.5 ton size
- 208/240-Volt electrical
- 24-Volt controls and compatible with most 24-Volt stats
- Compatible with most 24-Volt stats
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2-ton
- 10-KW electric heat
- 208/240-Volt
- Piston metering
The Goodman 2 Ton Upflow/Downflow Evaporator Coil 21 in. W Model CAPFA2318C6 is equipped with advanced features that ensure the comfort of your space. These features range from the check flowrater for cooling and heat pump applications to an all-aluminum evaporator coil. The evaporator coil is also furnished with a galvanized, leather grain-embossed finish. These are the features that make the Goodman evaporator coil a worthwhile investment.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21 in. depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Galvanized, leather grain-embossed finish
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Uncased coil
- Optimum performance
HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 3 ton size
- 5kW factory installed electric heat
- 240-Volt single connection power
- 24-Volt controls and compatible with most 24-Volt stats
Replacement cooling coil. For model 24VAQ or 24VDX units. Will accept R410a or R22 Refrigerant.
- 16 inches wide
- 16 inches tall
- 3.5 inches deep
- with Piston
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type)
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- 600 CFM unit
- 2 pipe 3 row coil
- 120V
- left hand
The GOODMAN CAPFA1818A6 is a cased A coil for use in upflow or downflow applications. The all-aluminum construction and advanced design of this coil improve its durability and heat transfer efficiency. The CAPFA evaporator coil is designed with a smaller size for use in space constrained areas without sacrificing efficiency. Whether you're replacing a failing coil or installing a new system, you can choose the CAPFA with confidence. GOODMAN pressure tests each coil twice before it leaves the factory and backs them with an excellent warranty.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21" depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Galvanized, leather grain-embossed finish
- Galvanized, leather grain-embossed finish
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
- 10kW factory installed
Cased Painted Upflow/Downflow. All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Slant coil
- Optimum performance
First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.
- OEM coil
- copper tubes
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
Cased Painted Upflow/Downflow. All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Factory installed 5kW electric heat
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- PSC motor
- 120v
- 2 Pipe 3 row coil
- Right hand piping connections
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Slant coil
- Optimum performance
Johnson Controls 5.0 Ton Vertical Cased Coil - 24.5" Cabinet Width
- 5.0 Ton
- Designed in the USA
- Vertical Cased
- 24.5" Cabinet Width