Searched for "40101700"
The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Superior performance is due to the special composite foam center which is much more structurally sound than cork
- It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
- Most effective vibration dampening pad available on the market
- EVA pad outperforms cork and rubber by a margin of greater than 3:1
- Designed to withstand 50 psi
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 1.5 ton
- 208/240v
- 24v controls
- 6kW with piston
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2-ton
- 10-KW electric heat
- 208/240-Volt
- Piston metering
HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 2.5 ton size
- 208/240-Volt electrical
- 24-Volt controls and compatible with most 24-Volt stats
- Compatible with most 24-Volt stats
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- HX Series
- Horizontal Fan Coils (Uncased)
- Heat Pump or DX - With Electric Heat
- (Heat pump w/Heat requires kit # 942-1)
- Features:
- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat
- Metering Device: Piston
- For use with R22 or R410A refrigerant
- Dimensions (HxWxD): 10" x 43-1/4" x 21"
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- Shipped with 2.5 ton piston
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Replacement cooling coil. For model 24VAQ or 24VDX units. Will accept R410a or R22 Refrigerant.
- 16 inches wide
- 16 inches tall
- 3.5 inches deep
- with Piston
Sturdy and stable, Diversitech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The 1-piece, heavy-duty plastic unit is manufactured in three heights. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise
- Available in 1 or 2 piece risers
- 4 risers can handle up to 2,000 lb. uniform load
- Elevates condensers, heat pumps and air handlers
- Sturdy and stable
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Uncased coil
- Optimum performance
Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.
- Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
- Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
- Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
- Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
- Textured surface prevents equipment sliding
- UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
- Water vapor evaporates through the UltraLite, preventing the expansion of cracks
- UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
- Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation
Condensing Unit Fin Whisk Brush. For Cleaning Debris From Condenser Fins And Evaporator Coils. 3w X 2.13"H. Mfg #FWB1
- For Cleaning Debris From Condenser Fins And Evaporator Coils
- 3w X 2.13"H
- Package Quantity 1
- Product height -0.600 in.
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2 pipe with 3 row coil. 800 cfm left handed model.
- 800 CFM
- 2 pipe 3 row coil
- 120v
- Left hand piping
No job can be completed properly without the right tools and accessories. With HVACR repairs, having the right accessories can help you and your technicians save money and make mney by providing flexible options when replacing expensive OEM designs. Plus, our brand means a better value, helping you meet your budget and enhance profitability.
- 1/2" Bore Universal Hex Hub
- Includes 2 set screws
- Durable
- Reliable
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
Johnson Controls 4.0 Ton Vertical Cased Coil - 21.0" Cabinet Width
- 4.0 Ton
- Designed in the USA
- Vertical Cased
- 21.0" Cabinet Width
Johnson Controls 2 Ton Vertical Cased Coil - 17.5" Cabinet Width
- 2 Ton
- Designed in the USA
- Vertical Cased
- 17.5" Cabinet Width
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Johnson Controls 5 Ton Vertical Cased Coil - 21" Cabinet Width
- 5 Ton
- Designed in the USA
- Vertical Cased
- 21" Cabinet Width
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- 600 CFM unit
- 2 pipe 3 row coil
- 120V
- left hand
AMRAD USA MADE RUN CAPACITOR
- 35.0 MF 370 440 RA2000/37 44-356 +/-10%
- Aluminum casing ensures strength and durability
- 10,000 AFC protected to ensure reliable performance
- OEM approved for safe operations
- Withstands extreme temperatures ranging from -40° to 70°C
Sturdy and stable, Diversitech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The 1-piece, heavy-duty plastic unit is manufactured in three heights. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise
- Available in 1 or 2 piece risers
- 4 risers can handle up to 2,000 lb. uniform load
- Elevates condensers, heat pumps and air handlers
- Sturdy and stable
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
- 10kW factory installed
This is a genuine Goodman replacement part. This condenser fan blade can be used in condensing units. It is gray in color to blend with other components.
- Number of blades: 3
- Diameter: 18 in.
- Pitch degree: 33 degree s
- Rotation: CCW
Generous individually engineered ribbing for optimum self-leveling ground support. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- Diversitechs most popular pad due to its rugged durability, strength, and clean looks
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. Tapcon recommended)
Johnson Controls 2.5 Ton Vertical Cased Coil - 17.5" Cabinet Width
- 2.5 Ton
- Designed in the USA
- Vertical Cased
- 17.5" Cabinet Width
Johnson Controls 3 Ton Vertical Cased Coil - 17.5" Cabinet Width
- 3 Ton
- Designed in the USA
- Vertical Cased
- 17.5" Cabinet Width
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
Johnson Controls 5.0 Ton Vertical Cased Coil - 24.5" Cabinet Width
- 5.0 Ton
- Designed in the USA
- Vertical Cased
- 24.5" Cabinet Width
Air Conditioning Systems are Split Systems which consist of the outdoor air conditioner and the indoor Air Handler (blower, fan coil). The system provides cooling only. For added warmth during the coldest months, heat strips (sold separately) may be installed at time of installation. Our systems provide excellent noise control to reduce noise during operation. Systems come pre-charged with environmentally friendly R-410A refrigerant. Includes outdoor air conditioner and indoor air handler. Copper lines and any other accessories are sold separately. Please consult with your licensed HVAC contractor to ensure system is correct for your installation.
- AHRI certified; ETL listed
- Tonnage: 2.5 - 3.0
- Liquid connection: 3/8 in.
- Suction connection: 3/4 in.
- Dimensions: 17.5 in. W x 21 in. D x 30 in. H
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Each pad is drillable making it easy to secure equipment to the pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- Diversitechs most popular pad due to its rugged durability, strength, and clean looks
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
Cased Painted Upflow/Downflow. All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type) factory installed R410 TXV
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
The All-Aluminum evaporator coil is constructed from aluminum tubing, fins and end plates giving you a single metal solution for outstanding, time-tested, heat transfer performance properties. If you're looking for an evaporator coil that offers enhanced durability, coupled with enhanced performance (as tested in our labs), this is the product for you. At GOODMAN, we believe in American dependability.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21 in. depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Galvanized, leather grain-embossed finish
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type)
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Designed specifically for the hurricane prone regions of Florida and the Gulf Coast, The Hurricane Pad meets stringent local code requirements for wind resistance. Heavier than a normal concrete pad, this 4 pad provides sufficient weight to meet code. For certain taller equipment, The Hurricane T-Class Pad is needed.
- Bracket secures condenser to the Hurricane Pad
- Use #8 self-drilling or self-tapping screws to secure condenser to brackets
- Be sure to place brackets according to local building code requirements
- Easy to install
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Superior performance is due to the special composite foam center which is much more structurally sound than cork
- It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
- Most effective vibration dampening pad available on the market
- EVA pad outperforms cork and rubber by a margin of greater than 3:1
- Designed to withstand 50 psi
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- PSC motor
- 120v
- 2 Pipe 3 row coil
- Right hand piping connections