The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.

• 2 ton fan coil piston
• 6kW electric heat
• 208/240v
• 24v controls

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength and clean looks

First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.

• OEM coil
• copper tubes

Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology

• Optimized for use with R-410A refrigerant
• Check flowrator for cooling applications
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Single-piece access panel with tight seal helps to keep conditioned air from escaping
• Seal tight customized suction and liquid grommets for easy installation and removal
• 21" depth for easier attic access
• Vertical application
• Galvanized, leather grain-embossed finish
• AHRI certified
• ETL listed
• All-aluminum metallurgy provides superior corrosion resistance
• Compatible with R-410A refrigerant
• Multi-louvered aluminum fin design helps support efficient heat transfer
• Hydrophilic fins provide superior condensate management

Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology

• Optimized for use with R-410A refrigerant
• Check flowrator for cooling applications
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Single-piece access panel with tight seal helps to keep conditioned air from escaping
• Seal tight customized suction and liquid grommets for easy installation and removal
• 21" depth for easier attic access
• Vertical application
• Galvanized, leather grain-embossed finish
• AHRI certified
• ETL listed
• All-aluminum metallurgy provides superior corrosion resistance
• Compatible with R-410A refrigerant
• Multi-louvered aluminum fin design helps support efficient heat transfer
• Hydrophilic fins provide superior condensate management

This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.

• Brand Compatibility: Goodman
• coil tubing assy
• Manufactured in the United States
• 2.5 Ton

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

The Goodman 2 Ton Upflow/Downflow Evaporator Coil 21 in. W Model CAPFA2318C6 is equipped with advanced features that ensure the comfort of your space. These features range from the check flowrater for cooling and heat pump applications to an all-aluminum evaporator coil. The evaporator coil is also furnished with a galvanized, leather grain-embossed finish. These are the features that make the Goodman evaporator coil a worthwhile investment.

• Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
• Optimized for use with R-410A refrigerant
• Check flowrator for cooling and heat pump applications
• Vertical application
• 21 in. depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• AHRI certified
• ETL listed
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• Galvanized, leather grain-embossed finish

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

The GOODMAN CAPFA1818A6 is a cased A coil for use in upflow or downflow applications. The all-aluminum construction and advanced design of this coil improve its durability and heat transfer efficiency. The CAPFA evaporator coil is designed with a smaller size for use in space constrained areas without sacrificing efficiency. Whether you're replacing a failing coil or installing a new system, you can choose the CAPFA with confidence. GOODMAN pressure tests each coil twice before it leaves the factory and backs them with an excellent warranty.

• Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
• Optimized for use with R-410A refrigerant
• Check flowrator for cooling and heat pump applications
• Vertical application
• 21" depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• AHRI certified
• ETL listed
• Galvanized, leather grain-embossed finish
• Galvanized, leather grain-embossed finish

Replacement cooling coil. For model 24VAQ or 24VDX units. Will accept R410a or R22 Refrigerant.

• 16 inches wide
• 16 inches tall
• 3.5 inches deep
• with Piston

HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.

• 3 ton
• 208/240-Volt electrical
• 24-Volt controls
• compatable with most 24-Volt stats

Johnson Controls 2.5 Ton Vertical Cased Coil - 21.0" Cabinet Width

• 2.5 Ton
• Designed in the USA
• Vertical Cased
• 21.0" Cabinet Width

HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.

• 2.5 ton size
• 208/240-Volt electrical
• 24-Volt controls and compatible with most 24-Volt stats
• Compatible with most 24-Volt stats

Johnson Controls 2 Ton Vertical Cased Coil - 17.5" Cabinet Width

• 2 Ton
• Designed in the USA
• Vertical Cased
• 17.5" Cabinet Width

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

Air Conditioning Systems are Split Systems which consist of the outdoor air conditioner and the indoor Air Handler (blower, fan coil). The system provides cooling only. For added warmth during the coldest months, heat strips (sold separately) may be installed at time of installation. Our systems provide excellent noise control to reduce noise during operation. Systems come pre-charged with environmentally friendly R-410A refrigerant. Includes outdoor air conditioner and indoor air handler. Copper lines and any other accessories are sold separately. Please consult with your licensed HVAC contractor to ensure system is correct for your installation.

• AHRI certified; ETL listed
• Tonnage: 2.5 - 3.0
• Liquid connection: 3/8 in.
• Suction connection: 3/4 in.
• Dimensions: 17.5 in. W x 21 in. D x 30 in. H

Cased Horizontal "A". All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.

• All-aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications

Generous individually engineered ribbing for optimum self-leveling ground support. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• Diversitechs most popular pad due to its rugged durability, strength, and clean looks

First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.

• copper tube
• aluminum fin

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

The All-Aluminum evaporator coil is constructed from aluminum tubing, fins and end plates giving you a single metal solution for outstanding, time-tested, heat transfer performance properties. If you're looking for an evaporator coil that offers enhanced durability, coupled with enhanced performance (as tested in our labs), this is the product for you. At GOODMAN, we believe in American dependability.

• Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
• Optimized for use with R-410A refrigerant
• Check flowrator for cooling and heat pump applications
• Vertical application
• 21 in. depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• AHRI certified
• ETL listed
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• Galvanized, leather grain-embossed finish

Johnson Controls 2.5 Ton Vertical Cased Coil - 17.5" Cabinet Width

• 2.5 Ton
• Designed in the USA
• Vertical Cased
• 17.5" Cabinet Width

Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.

• Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
• Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
• Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
• Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
• Textured surface prevents equipment sliding
• UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
• Water vapor evaporates through the UltraLite, preventing the expansion of cracks
• UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
• Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation