Searched for "40101700"
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- HX Series
- Horizontal Fan Coils (Uncased)
- Heat Pump or DX - With Electric Heat
- (Heat pump w/Heat requires kit # 942-1)
- Features:
- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat
- Metering Device: Piston
- For use with R22 or R410A refrigerant
- Dimensions (HxWxD): 10" x 43-1/4" x 21"
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- Shipped with 2.5 ton piston
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2 ton fan coil piston
- 6kW electric heat
- 208/240v
- 24v controls
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.
- OEM coil
- copper tubes
HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 2.5 ton size
- 208/240-Volt electrical
- 24-Volt controls and compatible with most 24-Volt stats
- Compatible with most 24-Volt stats
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- 600 CFM unit
- 2 pipe 3 row coil
- 120V
- left hand
The GOODMAN CAPFA1818A6 is a cased A coil for use in upflow or downflow applications. The all-aluminum construction and advanced design of this coil improve its durability and heat transfer efficiency. The CAPFA evaporator coil is designed with a smaller size for use in space constrained areas without sacrificing efficiency. Whether you're replacing a failing coil or installing a new system, you can choose the CAPFA with confidence. GOODMAN pressure tests each coil twice before it leaves the factory and backs them with an excellent warranty.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21" depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Galvanized, leather grain-embossed finish
- Galvanized, leather grain-embossed finish
Johnson Controls 2.5 Ton Vertical Cased Coil - 21.0" Cabinet Width
- 2.5 Ton
- Designed in the USA
- Vertical Cased
- 21.0" Cabinet Width
First Co. Direct OEM replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, and adherence to federal, state and local codes and for valid warranty. Professional installation recommended.
- copper tube
- aluminum fin
HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 3 ton
- 208/240-Volt electrical
- 24-Volt controls
- compatable with most 24-Volt stats
Cased Horizontal Slab. All-Aluminum evaporator coil. Optimized for use with R-410A refrigerant. Some models suitable for use with R-410A or R-22 refrigerant.
- All-aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- low horizontal unit
- 400 cfm
- 2 pipe 3 row
- right hand piping connections
HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 3 ton size
- 5kW factory installed electric heat
- 240-Volt single connection power
- 24-Volt controls and compatible with most 24-Volt stats
Generous individually engineered ribbing for optimum self-leveling ground support. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- Diversitechs most popular pad due to its rugged durability, strength, and clean looks
Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.
- Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
- Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
- Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
- Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
- Textured surface prevents equipment sliding
- UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
- Water vapor evaporates through the UltraLite, preventing the expansion of cracks
- UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
- Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation
Condensing Unit Fin Whisk Brush. For Cleaning Debris From Condenser Fins And Evaporator Coils. 3w X 2.13"H. Mfg #FWB1
- For Cleaning Debris From Condenser Fins And Evaporator Coils
- 3w X 2.13"H
- Package Quantity 1
- Product height -0.600 in.
Johnson Controls 4.0 Ton Vertical Cased Coil - 21.0" Cabinet Width
- 4.0 Ton
- Designed in the USA
- Vertical Cased
- 21.0" Cabinet Width
HBC horizontal recessed fan coil unit. Chilled water and hot water. 2-pipe with 3-row coil. 600 cfm left handed model.
- PSC motor
- 120v
- 2 Pipe 3 row coil
- Right hand piping connections
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks