Dundas Jafine's 4 in. aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure. No tool required.

• Ideal for use with flexible or semi-rigid ducts
• Aluminum construction
• No tools necessary
• Easy operation

This Aluminum Pipe can be used to vent most types of heating units including gas and electric clothes dryers. This product features an easy to close snap lock system. It's composed of a non-combustible, all aluminum construction.

• 4 in. of diameter x 24 in. L
• Made of 0.012 in. aluminum
• Used for transition ducting, not for in wall use
• For correct and approved installation practices always consult your local building codes

The Duct to Duct Increaser connects 3 in. to 4 in. ducts together. It is ideal for bathroom fan exhaust applications. Finished in black color. The increaser is designed to be a tight fit to reduce air leaks in the connections. When using the increaser with a 3 in or 4 in snap pipe (aluminum or galvanized) , it may be necessary to unsnap the receiving end of the pipe, then insert the increaser and snap the pipe back together.

• Made of polypropylene
• Used when your exhaust port or exhaust hood needs to be increased from 3 in. to accommodate a 4 in. duct
• Consult your local building codes for approved installation practices
• Light weight design

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Heavy Gauge 4 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

This all aluminum elbow has a 4-piece construction and can be adjusted up to 90 to use at various angles. It can be used in many general-purpose applications including the venting of most types of heating units. The aluminum elbow has 1-crimped end and 1-straight end.

• 4-piece all aluminum construction
• Used to vent most types of heating units
• Fully adjustable to 90
• 1 crimped end allows for easy installation

The Master Flow 6 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 6 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 6 in. pipe to 4 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

The Master Flow 4 in. x 3 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 4 in. pipe to a 3 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 4 in. pipe to 3 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

These Worm Clamps are ideal for attaching aluminum ducts to other aluminum products, including elbows and pipe. Easily adjustable with the turn of a screwdriver, these clamps can be used with all venting applications. A heavy-duty galvanized steel construction ensures longevity through a variety of uses. For optimal performance, it is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.

• Made of heavy duty galvanized steel
• Easily adjustable using a hex or flat head screwdriver
• Adjusts from 5-1/8 in. to 6-1/2 in.
• Can be used in all venting applications

Master Flow Metal Pipe is available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. Round pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow pipe creates a quick and secure installation that you can rely on.

• Crimped end for a secure interlocking fit
• Galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Can be cut to needed length with tin snips
• Always insulate ductwork for greater system efficiency and comfort

Duct strapping is ideal for use in hanging hot air supply and cold air returns to framing members. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Galvanized steel construction resists corrosion
• Solid strapping, easy to drill or nail
• Can accept fasteners at any point along the length of the strapping
• Convenient cardboard dispenser allows for easy transport

This 4 in. aluminum duct connector attaches 2-pieces of 4 in. flexible duct together. It is ideal for use as both a duct connector and extending the exhaust collar of your clothes dryer. Product length is 6 in.

• All aluminum construction
• Includes 1-straight end and 1-crimped end for ease of installation
• Can be used with all types of flexible ducts
• Can be used in both gas and electric dryer applications

The Master Flow 10 in. to 8 in. x 8 in. Wye is made of 30-Gauge, galvanized steel. The joint is used to transition from 1 pipe to 2 pipes in a heating and air conditioning application. It can be installed with sheet metal screws (not included). The wye has a maximum temperature rating of 390 degree F.

• Designed to transition from 1-pipe to 2-pipes in a heating and air conditioning application
• Install with sheet metal screws (not included)
• Maximum temperature rating of 390 degrees Fahrenheit
• Always insulate ductwork for greater system efficiency and comfort
• Seal seams with code-approved mastic, sealant or duct tape (not included)

The Master Flow Air-Tite 6 in. Take-Off provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow 4 in. x 3 in. Round Reducer is made of 26-Gauge, galvanized steel. It is used to transition from a 4 in. pipe to a 3 in. pipe in an HVAC system. It features hemmed collar edges for strength and a snug fit. This round reducer is suitable for most HVAC applications.

• Used to transition from a 4 in. pipe to a 3 in. pipe in an HVAC system
• Always seal seams with building code-approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Hemmed collar edges for a snug fit and increased strength

The Master Flow 5 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 5 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 5 in. pipe to 4 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Maximum temperature rating of 390F, minimum temperature rating of -100F

The Master Flow 10 in. x 8 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 10 in. pipe to a 8 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 10 in. pipe to 8 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Hemmed collar edges to provide strength and a snug fit

The Master Flow Air-Tite 8 in. Take-Off is suitable for most HVAC applications. It provides an airtight seal from a flat surface to an insulated flexible duct or round pipe. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed using sheet metal screws (sold separately). It is suitable for most HVAC applications.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps to create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow 26 Gauge 7 in. x 6 in. Flat Reducer is made OG galvanized steel. Its short length makes it ideal for tight spaces. The reducer is used to transition from a 7 in. pipe to a 6 in. pipe system. It is suitable for most HVAC applications.

• 26-Gauge, galvanized steel construction for durability
• Connects 7 in. pipe to 6 in. pipe in duct run
• Connect using sheet metal screws (not included)
• Universal - not crimped
• Can be crimped as needed

Master Flow standard 90 degree Adjustable 6 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90 degree . It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 degree position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90 degree
• 30-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

The Master Flow 4 in. x 4 in. x 4 in. Wyes are made of 30-Gauge, galvanized steel. They are used primarily to transition from 1 pipe to 2 pipes in heating and air conditioning applications. They are easily installed with sheet metal screws (not included). The joints have a maximum temperature rating of 390F.

• Used primarily to transition from 1-pipe to 2-pipes in heating and air conditioning applications
• Can be installed with sheet metal screws (not included)
• Maximum temperature rating of 390F
• Always insulate ductwork for greater system efficiency and comfort
• Seal seams with code-approved mastic, sealant or duct tape (not included)

The Master Flow Air-Tite 12 in. Take-Off is constructed of 30-gauge, galvanized steel for durability. This HVAC part is used to connect 12 in. round pipe or flexible duct to a flat surface. It features a tacky gasket to help create a secure, substantially airtight seal. This take-off has a maximum temperature rating of 390 degrees Fahrenheit.

• Use to connect 12 in. round pipe or flexible duct to a flat surface
• Install with sheet metal screws (not included)
• Always seal seams with code-approved sealant or duct tape (not included)
• Tacky gasket helps to create a secure, substantially airtight seal
• Maximum temperature rating of 390 degrees Fahrenheit, minimum temperature rating of -100 degrees Fahrenheit
• Tacky gasket creates a secure, substantially air-tight seal.
• Use to connect round pipe or flexible duct to flat surface.
• Install with sheet metal screws

Heavy Gauge 3 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 28-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort