Dundas Jafine's 4 in. aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure. No tool required.

• Ideal for use with flexible or semi-rigid ducts
• Aluminum construction
• No tools necessary
• Easy operation

Heavy Gauge 4 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Duct can be cut to length as needed
• Steel section connectors - resist chemical, increases the life of the boiler
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 4 in. Round Duct Cap, also called a tee-cap or clean-out plug, is constructed of galvanized steel for durability. The duct cap is used to terminate or block off a rectangular duct run in HVAC systems. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.

• Use to cap off a round or rectangular duct run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

Duct strapping is ideal for use in hanging hot air supply and cold air returns to framing members. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Galvanized steel construction resists corrosion
• Solid strapping, easy to drill or nail
• Can accept fasteners at any point along the length of the strapping
• Convenient cardboard dispenser allows for easy transport

Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems. These cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.

• Always seal seams with code approved mastic or sealant (or duct tape)
• Always insulate ductwork for greater system efficiency and comfort
• S cleats secure bare edges of rectangular duct
• Insulate ductwork to promote system efficiency

The Master Flow Air-Tite 6 in. Take-Off provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow Air-Tite 8 in. Take-Off is suitable for most HVAC applications. It provides an airtight seal from a flat surface to an insulated flexible duct or round pipe. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed using sheet metal screws (sold separately). It is suitable for most HVAC applications.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps to create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow Air-Tite 10 in. Take-Off can be installed with sheet metal screws (sold separately). It provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps to create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow 6 in. x 5 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 6 in. pipe to a 5 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 6 in. pipe to 5 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

The Master Flow 10 in. x 4 in. x 6 in. 90 degree Register Box creates a right-angle transition from round pipe or insulated flexible duct to an air register. This box is made of galvanized steel. It can be installed with sheet metal screws. It is suitable for most HVAC applications.

• Creates a right-angle transition from 6 in. round pipe or insulated flexible duct to a 10 in. x 4 in. air register
• Install with sheet metal screws (not included)
• Always seal seams with code-approved mastic, sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

This Master Flow 10 in. x 6 in. to 6 in. Diameter Universal Register Box creates a straight (in-line) transition from round pipe or insulated flexible duct to an air register or grille. It can be installed with sheet metal screws. It is suitable for most HVAC applications. This universal register box is made of galvanized steel.

• Creates a straight, in-line transition from round pipe or insulated flexible duct to an air register or grille
• Installs with sheet-metal screws
• Insulate ductwork for system efficiency and comfort
• Seal seams with code-approved mastic, sealant or duct tape (not included)

Master Flow Metal Pipe is available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. Round pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow pipe creates a quick and secure installation that you can rely on.

• Crimped end for a secure interlocking fit
• Galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Can be cut to needed length with tin snips
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 8 in. x 7 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 8 in. pipe to a 7 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 8 in. pipe to 7 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

The Master Flow 10 in. x 10 in. x 8 in. Ceiling Register Box is made of 30-Gauge, zinc-coated, galvanized steel. It is designed for a transition from round pipe or insulated flexible duct to an air register or grille. It can be installed with sheet metal screws (not included).

• Designed for a transition from round pipe or insulated flexible duct to an air register or grille
• Can be installed with sheet metal screws (not included)
• Maximum temperature rating of 390 degree F
• Minimum temperature rating of -100 degree F

Master Flow heavy gauge pipe is used to vent boilers, furnaces and hot water heaters. Master Flow metal pipe is available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 5 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 5 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 5 in. pipe to 4 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Maximum temperature rating of 390F, minimum temperature rating of -100F

Master Flow 26-Gauge 90 Adjustable 8 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

The Master Flow 12 in. x 10 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 12 in. pipe to a 10 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 12 in. pipe to 10 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

The Master Flow 10 in. x 8 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 10 in. pipe to a 8 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 10 in. pipe to 8 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Hemmed collar edges to provide strength and a snug fit

Master Flow standard 90 degree Adjustable 6 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90 degree . It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 degree position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90 degree
• 30-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

The Master Flow 6 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 6 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 6 in. pipe to 4 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

Master Flow Heavy Gauge Pipe is used to vent boilers, furnaces and hot water heaters. Master Flow metal pipe is available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Maximum temperature rating of 390 degree F, minimum temperature rating of -100 degree F

The Master Flow Air-Tite 14 in. Take-Off provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.

• Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Tacky gasket helps create a secure, airtight seal
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

Heavy Gauge 3 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.

• Easy-to-install snap lock design
• Crimped end with a stop-bead for a secure interlocking fit
• Sturdy 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 14 in. x 6 in. x 8 in. Universal Register Box creates a straight (in-line) transition from round pipe or insulated flexible duct to an air register or grille. It can be installed with sheet metal screws. It is suitable for most HVAC applications. This universal register box is made of galvanized steel.

• Creates a straight (in-line) transition from 8 in. round pipe or insulated flexible duct to a 14 in. x 6 in. air register or grille
• Install with sheet metal screws (not included)
• Always seal seams with building code-approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

Dundas Jafine's aluminum Elbows can be used to vent most types of heating units. This product features an all-aluminum, 4-piece construction and is fully adjustable to 90 degree . Includes one crimped end and one solid end to ease assembly.

• 0.016-Gauge aluminum
• Heavy-duty
• Fully adjustable to 90 degree
• 4-piece construction

Master Flow 28-Gauge 90Adjustable 3 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ship in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 28-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Heavy Gauge Adjustable Elbows are used to make angular turns in round pipe to vent boilers, furnaces and hot water heaters where allowed by code. They have a sturdy galvanized steel construction and are simple to adjust. They are also crimped on one end to easily fit into a pipe or other fitting of the same diameter.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90 degree
• 28-Gauge, galvanized steel construction
• Crimped end for easy installation
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

Master Flow 26-Gauge 90 Adjustable 8 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

The Master Flow 14 in. Starting Collar is suitable for most HVAC applications. It provides a transition from a flat surface like a plenum (made from metal, ductboard or insulated) to round pipe or insulated flexible duct. It can be used with ductboard, an internally lined or unlined plenum. This galvanized steel starting collar features extra-long tabs to fit most duct board thicknesses.

• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Can be used with an internally lined or unlined plenum
• Extra-long tabs to fit most ductboard thicknesses through 1-1/2 in. (or R-6 value)
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow 5 in. Round Duct Cap, also called a tee-cap or clean-out plug, is constructed of galvanized steel for durability. The duct cap is used to terminate or block off a rectangular duct run in HVAC systems. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.

• Use to cap off a round or rectangular duct run
• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems, these cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.

• Always seal seams with code approved mastic or sealant (or duct tape)
• Always insulate ductwork for greater system efficiency and comfort
• Can be hammered in place
• Insulate ductwork to promote system efficiency

The Master Flow 4 in. x 3 in. Round Reducer is made of 26-Gauge, galvanized steel. It is used to transition from a 4 in. pipe to a 3 in. pipe to vent boilers, furnaces and hot water heaters where allowed by code.It's 1-piece design means no seams to seal or leak.

• Used to transition from a 4 in. pipe to a 3 in. pipe in an HVAC system
• Always seal seams with building code-approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)
• Hemmed collar edges for a snug fit and increased strength

Rectorseal Slimduct 5.5" -3.75" Reducer, White 140-100. Reducers Offer An Aesthetically Pleasing Transition From A 5.5" (140mm) Duct To A 3.75" (100mm) Duct. Weather resistant PVC, UV stabilized & fire resistant. Tested to over 2,000 hours. Temperature range -4degree F to 140degree F. Complements any residential or commercial building. Available in SD77 (2 3/4"), SD100 (3 3/4"), SD140 (51/2") and 4 color options (white, ivory, black and brown). 78" duct lengths and 15 fittings ensure complete flexibility of installation. Mfg #86206

• Reducers offer an aesthetically pleasing transition from a 5.5" (140mm) duct to a 3.75" (100mm) duct.
• Weather resistant PVC, UV stabilized & fire resistant. Tested to over 2,000 hours. Temperature range -4degree F to 140degree F
• Complements any residential or commercial building. Available in SD77 (2 3/4"), SD100 (3 3/4"), SD140 (51/2") and 4 color options (white, ivory, black and brown)
• 78" duct lengths and 15 fittings ensure complete flexibility of installation

Master Flow 26-Gauge 90 Adjustable 14 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90
• 26-Gauge, galvanized steel construction
• Always seal seams with building code approved sealant or duct tape (not included)
• Always insulate ductwork for greater system efficiency and comfort (not included)

Master Flow Beaded Metal Pipe is available to help make your next HVAC project a success. Beaded pipe can be used as a main trunk line or branch line, as well as in return air situations. It maintains the most efficient characteristics for airflow and is common throughout the country. A simple snap lock design and sturdy galvanized steel construction on Master Flow beaded pipe creates a quick and secure installation that you can rely on.

• Beaded for strength
• Easy-to-install snap lock design
• Crimped end for a secure interlocking fit
• Can be cut to needed length with tin snips
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 10 in. Starting Collar is suitable for most HVAC applications. It provides a transition from a flat surface like a plenum (made from metal, ductboard or insulated) to round pipe or insulated flexible duct. It can be used with ductboard, an internally lined or unlined plenum. This galvanized steel starting collar features extra-long tabs to fit most duct board thicknesses.

• Install with sheet metal screws (not included)
• Fits most HVAC types for universal application
• Can be used with an internally lined or unlined plenum
• Extra-long tabs to fit most ductboard thicknesses through 1-1/2 in. (or R-6 value)
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)

The Master Flow 5 in. Starting Collar is suitable for most HVAC applications. It provides a transition from a flat surface like a plenum (made from metal or lined duct) to round pipe or insulated flexible duct. A Damper can be added to this model if needed.

• Connects round pipe or insulated flexible duct to a flat surface to start a duct run
• Fits most HVAC types for universal application
• Can be used with an internally lined or unlined plenum
• Extra-long tabs to fit most duct board thicknesses through 1-1/2 in. (or R-6 value)

Master Flow 4 in. Aluminum Elbow makes venting a boiler, furnace or hot water heater a snap, installing on an angle up to 90 via a crimped-end design that makes it easy to affix. The elbow fits roundest aluminum pipes with 4 in. Dia Ideal for use in high-heat applications. Ships in 90 position.

• Durable aluminum construction
• Designed to fit round piping so that you can vent boilers, furnaces and hot water heaters on an angle
• Light-weight, crimped-end design installs easily and provides a secure fit
• Seam seal using building code approved sealant or duct tape for a quick and easy finishing touch
• Fits most round aluminum pipes with 4 in. Dia
• Adjustable design allows use at angles up to 90
• For reliability in high-heat applications

Used to vent 2 appliances together where codes allow. Heavy duty construction meets most building codes for single wall use. Crimped branch pipe in the direction of airflow.

• 26-Gauge steel construction
• Y branch allows air to flow easily
• Crimped in the direction of airflow
• Vent multiple appliances where code allows

The Master Flow 7 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 7 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.

• Hemmed collar edges for an improved fit and increased strength
• Connects 7 in. pipe to 4 in. pipe in duct run
• Seal seams with code-approved mastic, sealant or duct tape (sold separately)
• Always insulate ductwork for greater system efficiency and comfort (insulation not included)

Heavy Gauge Adjustable Elbows are used to make angular turns in round pipe to vent boilers, furnaces and hot water heaters where allowed by code. They have a sturdy galvanized steel construction and are simple to adjust. They are also crimped on one end to easily fit into a pipe or other fitting of the same diameter.

• Used to make angular or gradual turns in runs of pipe
• Adjustable to any angle through 90 degree
• 28-Gauge, galvanized steel construction
• Crimped end for easy installation
• Always seal seams with building code approved sealant or duct tape
• Always insulate ductwork for greater system efficiency and comfort

The Master Flow 6 in. Starting Collar is suitable for most HVAC applications. It provides a transition from a flat surface like a plenum (made from metal or lined duct) to round pipe or insulated flexible duct. A Damper can be added to this model if needed.

• Connects round pipe or insulated flexible duct to a flat surface to start a duct run
• Fits most HVAC types for universal application
• Can be used with an internally lined or unlined plenum
• Extra-long tabs to fit most duct board thicknesses through 1-1/2 in. (or R-6 value)

Used to vent two appliances together where codes allow. Heavy duty construction meets most building codes for single wall use. Crimped branch pipe in the direction of airflow.

• 26-Gauge steel construction
• "Y" branch allows air to flow easily
• Crimped in the direction of airflow
• Vent multiple appliances where code allows