Searched for "40141900"
The 4 in. Steel Round Gas Vent Top is a Type B, galvanized-steel fitting that helps prevent rain and debris from entering the vent. It is not for use with wood-burning applications. The end is die-formed for uniform sizing and a strong, easy-to-connect joint. The cap is tested and UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel
- Prevents rain and debris from entering the vent
- Not to be used with wood-burning applications
- Tested and listed per UL 441 for installation in single and multi-story buildings
Designated for use on approved gas appliances, the 3 in. x 60 in. Round Type B Gas Vent Pipe is ideal for residential, light commercial and industrial applications. The exclusive locktab feature adds versatility to installation. Selkirk Gas Vent pipe and fittings have been tested and listed per UL 441 for installation as Type B and BW gas vents to be installed in single and multi-story buildings in accordance with the standards of The National Fire Protection Association NFPA54 and NFPA211.
- Made of strong, durable galvanized steel, this vent pipe is built to last
- Die-formed ends to assure uniform sizing
- For use on approved gas appliances in residential, light commercial and industrial applications
- Exclusive locktab feature adds versatility to installation
- Fits most 3 in. pipes
- In accordance with National Fire Protection Association Nfpa54 and Nfpa211 standards
- Type B gas vent is also referred to as b vent or type b vent
- Some common applications may include warm air furnaces, tank water heaters, residential boilers, common vented appliances and more
- Used on gas-fired category I natural draft appliances
Use to vent condensing appliances. Includes 1 Locking Clamp. PolyPro is an engineered alternative for condensing gas appliances. Engineered for venting, it is easier and faster to install than PVC, saving the contractor time and money. Polypropylene has a higher operating temperature limit of 230 degree F/110 degree C (PVC is 149 degree F/65 degree C max and CPVC is 194 degree F/90 degree C). PolyPro is engineered with a condensation management system.
- PolyPro is a polypropylene vent pipe for use with ANSI category II and IV gas-burning appliances, including high efficiency water heaters, condensing boilers and warm air furnaces
- 0 in. clearance to combustibles for exhaust temperatures up to 194 degree F / 90 degree C and 0 in. clearance for vertical installations up to exhaust temperatures of 230 degree F / 110 degree C and 1/4 in. / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230 degree F / 110 degree C
- Check with appliance manufacturer, Intertek / ETL Listed to ULC-S636 Listed as a class IIA, IIB, and IIC vent system
- PolyPro is an environmentally safe and engineered alternative, for condensing gas appliances
- Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals
- PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over 20 years
- PolyPro is engineered with a corrosion-free, condensation management system
- Rigid pipe constructed of 2.2 mm (minimum) thick PolyPro
- Easy to install lightweight, assembles quickly, can be disassembled for inspection or cut to desired length
- Gasketed joint system, no adhesives nor primers required, no curing times and no special training, no mess
The Model 4EFC5 Expandable Flex Connector is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Single Wall Expandable Flexible Gas Vent Connector.
- Designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent.
- Expandable Flex Connector eliminates the need for elbows and greatly simplifies most gas appliance vent installations.
- Available in 3" & 4" diameters.
- 3' length expands from 2' to 3.5' in length.
- 5' length expands from 2.5' to 5' in length.
- Galvanized ends
- Easier to expand to desired length
- Save time on the jobsite
- Sleek Design, Reflective Finish
The 4 in. Steel Male Universal Gas Vent Adapter is a Type B round fitting designed for approved gas appliances in residential, light commercial and industrial applications. It is made of strong, durable galvanized steel. The ends are die-formed to assure uniform sizing for strong, easy-to-connect joints. A locktab feature offers the option of installation without sheet-metal screws. It is UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel outer pipe
- For use on approved gas appliances
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Ends are die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single- and multi-story buildings
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specially tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. To calculate installed length, subtract one 12 from each connection of vent. A 1 clearance (air space) to combustible materials must be maintained. To calculate OD add 58.
- Type B gas vent designed to the demands of the common category I appliance installation
- Use with natural gas and liquefied propane (LP) category I appliances with a draft hood
- 1 in. clearance to combustibles in single and multi-family dwellings
- Available in 3 in. Dia to 8 in. Dia
- Limited lifetime warranty
- Listed to UL 441, UL 1777 and ULC S816
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Allows a 4 in. Dia b-vent run to be increased to 5 in. for added draft
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Gives 4 in. b-vent run flexibility to bend around an obstruction like a stud and maintain 1 in. clearance
- Has 48 in. L to allow multiple bends
- Eliminates the need for b-vent to more easily connect an appliance to the b-vent wye or tee in the mechanical room
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and Liquified Propane (LP) category I appliances with a draft hood
- Directs rain away from the flashing to prevent water penetration in attic
- Apply 500 caulking around the edge of the storm collar and the b-vent to prevent water penetration
- Made from galvanized steel to prevent corrosion
Use to vent condensing appliances. Includes 1 Locking Clamp. PolyPro is an engineered alternative for condensing gas appliances. Engineered for venting, it is easier and faster to install than PVC, saving the contractor time and money. Polypropylene has a higher operating temperature limit of 230 degree F/110 degree C (PVC is 149 degree F/65 degree C max and CPVC is 194 degree F/90 degree C). PolyPro is engineered with a condensation management system.
- PolyPro is a polypropylene vent pipe for use with ANSI category II and IV gas-burning appliances, including high efficiency water heaters, condensing boilers and warm air furnaces
- 0 in. clearance to combustibles for exhaust temperatures up to 194 degree F / 90 degree C and 0 in. clearance for vertical installations up to exhaust temperatures of 230 degree F / 110 degree C and 1/4 in. / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230 degree F / 110 degree C
- Check with appliance manufacturer, Intertek / ETL Listed to ULC-S636 Listed as a class IIA, IIB, and IIC vent system
- PolyPro is an environmentally safe and engineered alternative, for condensing gas appliances
- Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals
- PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over 20 years
- PolyPro is engineered with a corrosion-free, condensation management system
- Rigid pipe constructed of 2.2 mm (minimum) thick PolyPro
- Easy to install lightweight, assembles quickly, can be disassembled for inspection or cut to desired length
- Gasketed joint system, no adhesives nor primers required, no curing times and no special training, no mess
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Allows a 3 in. Dia b-vent run to be increased to 4 in. for added draft
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
The Model 3EFC5 Expandable Flex Connector is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Model EFC expandable flexible gas vent connector system greatly simplifies most gas appliance vent installations
- No elbows are required for installation
- Integrated draft hood connector
- Expands 1 ft. to 3 ft.
- Limited lifetime warranty
- Check appliance installation instructions for details
- Industry best warranty contact Selkirk for details
- requires 1 in. minimum airspace clearance to combustibles
- can be for single vent or combined vent
- Provides 360° flexibility
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Connects 4 in. Dia b-vent to the draft hood of the appliance
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Use for horizontal through-the-wall terminations. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. FasNSeal is for use with natural gas or propane Categories II, III and IV appliances or Canada's Type BH Gas Vent Systems, having a maximum rated operating temperature of 480°F and a maximum positive pressure of 15" (FasNSeal Flex 6") water column.
- FASNSEAL can be used on a wide range of applications, including: high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters, or tankless water heaters
- Patented built-in mechanical locking band and triple-lipped directional gaskets
- Engineered with smooth clean welds located 90 degree from mechanical locking bands
- All FASNSEAL components which come in contact with exhaust gases and condensates are now silicone free, important design and manufacturing feature greatly reduces the chances of system breakdown and failure
- Welded seams ensure a leak-free product that is meant to last
Type B Gas Vent Wye is used to combine connectors from 2 or more appliances into a common vent. Branch swivels for alignment. Swivels on male end.
- Type B gas vent designed to the demands of the common category I appliance installation
- Use with natural gas and liquefied propane (LP) category I appliances with a draft hood
- Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation; an innovative system for a lock tight connection called DuraLock
- 1 in. clearance to combustibles in single and multi-family dwellings
- Available in 3 in. to 8 in. Dia
- Limited lifetime warranty
- Listed to UL 441, UL 1777, and ULC S868
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Enables the angle of the 4 in. Dia vent run to be adjusted up to 90 degree from vertical, all vent runs must return to vertical before termination
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Allows 5 in. Dia DuraVent brand b-vent to be attached to the bottom of a different brand b-vent like Selkirk or MetalFab back to the appliance
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- Maintains UL listing for both brands of b-vent
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 10.5 in. L to a 3 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Made of strong, durable galvanized steel, the 4 in. x 36 in. Round Type B Gas Vent Pipe is built to last. The exclusive locktab feature adds versatility to installation on approved gas appliances in residential, light commercial and industrial applications. Rugged construction, assured safety and fully tested and listed per UL441.
- Constructed of strong, durable galvanized steel, this vent pipe is built to last
- Die-formed ends to assure uniform sizing
- For use on approved gas appliances in residential, light commercial and industrial applications
- Exclusive locktab feature adds versatility to installation
- Fits most 4 in. pipes
- In accordance with National Fire Protection Association Nfpa54 and Nfpa211 standards
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category i appliances with a draft hood
- Directs rain away from the flashing to prevent water penetration in attic
- Apply 500 caulking around the edge of the storm collar and the b-vent to prevent water penetration
- Made from galvanized steel to prevent corrosion
The Model 4EFC3 Expandable Flex Connector is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Single Wall Expandable Flexible Gas Vent Connector.
- Designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent.
- Expandable Flex Connector eliminates the need for elbows and greatly simplifies most gas appliance vent installations.
- Available in 3" & 4" diameters.
- 3' length expands from 2' to 3.5' in length.
- 5' length expands from 2.5' to 5' in length.
- Easier to expand to desired length
- Save time on the jobsite
- Sleek Design, Reflective Finish
- Limited Lifetime warranty
The 4 in. x 60 in. Steel Round Gas Vent Pipe is made of durable galvanized steel and die-formed for uniform sizing and strong, easy-to-connect joints. A locktab feature allows the option of installation without using sheet-metal screws. This Type B round fitting is designed for use on approved gas appliances in residential, light commercial and industrial applications. It is tested and UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel
- Gas vent pipe for use on approved gas appliances
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single- and multi-story buildings
- Type B gas vent is also referred to as b vent or type b vent
- Some common applications may include warm air furnaces, tank water heaters, residential boilers, common vented appliances and more
- Used on gas-fired category I natural draft appliances
The 5 in. Steel 90 degree Adjustable Gas Vent Elbow is ideal when you need an offset around rafters, joists and other construction obstacles. It has a strong, durable, galvanized-steel outer pipe and internal spacing bends to assure a uniform insulating air space between pipe walls. Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints. A locktab feature offers the option of installation without sheet-metal screws. This Type B fitting is UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel outer pipe
- Use to create an offset around rafters, joists and other construction obstacles
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single and multi-story buildings
- Internal spacing bends create a uniform insulating air space between pipe walls
Type B Gas Vent is used for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. A 1 in. clearance to combustible material must be maintained. To calculate OD add 5/8 in.
- Type B gas vent designed to the demands of the common category I appliance installation
- Use with natural gas and liquified propane (lp) category I appliances with a draft hood
- Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation
- An innovative system for a lock tight connection called DuraLock
- 1 in. clearance to combustibles in single and multi-family dwellings
- Available in 3 in. thru 8 in. Dia
- To calculate installed length, subtract 1-1/2 in. from each connection of vent
- To calculate OD add 5/8 in.
- Limited lifetime warranty
- Listed to UL 441 and ULC S693
Use to support offsets and pipe used in vertical rise or horizontal runs as per installation instructions. PolyPro and PVC/CPVC: PVC pipes are commonly used for venting water heaters, condensing boilers and warm air furnaces, yet PVC was never designed for such use. PolyPro is an engineered alternative for condensing gas appliances. Engineered for venting, it is easier and faster to install than PVC, saving the contractor time and money.
- PolyPro is a Polypropylene vent pipe for use with ANSI category II and IV gas-burning appliances, including high efficiency water heaters, condensing boilers and warm air furnaces
- 0 in. clearance to combustibles for exhaust temperatures up to 194 degree F / 90 degree C and 0 in. clearance for vertical installations up to exhaust temperatures of 230 degree F / 110 degree C and 1/4 in. / 6 mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230 degree F / 110 degree C
- Check with appliance manufacturer, Intertek / ETL Listed to ULC-S636 Listed as a class IIA, IIB, and IIC vent system
- PolyPro is an environmentally safe and engineered alternative, for condensing gas appliances
- Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals
- PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over 20 years
- PolyPro is engineered with a corrosion-free, condensation management system
- Rigid pipe constructed of 2.2 mm (minimum) thick PolyPro
- Easy to install lightweight, assembles quickly, can be disassembled for inspection or cut to desired length
- Gasketed joint system, no adhesives nor primers required, no curing times and no special training, no mess
5 in. x 60 in. Round Type B Gas Vent Pipe is built to last with its strong, durable galvanized steel construction. The exclusive locktab feature add versatility to your installation.
- Constructed of strong, durable galvanized steel, this vent pipe is built to last
- Die-formed ends to assure uniform sizing
- For use on approved gas appliances in residential, light commercial and industrial applications
- Exclusive locktab feature adds versatility to installation
- Fits most 5 in. pipes
- In accordance with National Fire Protection Association Nfpa54 and Nfpa211 standards
- Type B gas vent is also referred to as b vent or type b vent
- Some common applications may include warm air furnaces, tank water heaters, residential boilers, common vented appliances and more
- Used on gas-fired category I natural draft appliances
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 10.5 in. L to a 4 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 22.5 in. L to a 5 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 58.5 in. L to a 4 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
DuraConnect and DuraConnect II is a flexible aluminum connector system. Can not to be enclosed and cannot penetrate through walls, floors, or ceilings. Twist-lock connectors on each end for fast, easy professional installations.
- Can be used when type B gas vent double wall connector is required
- Not to be enclosed and cannot penetrate through walls, floors and ceilings
- Twist lock connectors on each end
- 1 in. clearance to combustibles
The 5 in. Steel Storm Collar is a Type B fitting made with durable galvanized steel and is typically applied above the flashing to provide a weatherproof seal of the pipe above the roof line. It is designed for use on approved gas appliances.
- Strong, durable galvanized steel
- Apply above the flashing to provide a weatherproof seal of the pipe above the roof line
- 8-5/8 in. Dia x 1-5/8 in. length
- Type B fitting for approved gas appliances
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 16.5 in. L to a 4 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 22.5 in. L to a 6 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and Liquified Propane (LP) category I appliances with a draft hood
- Connects two 4 in. Dia b-vent flues to common vent to a larger 5 in. Dia b-vent to handle increased exhaust volume
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent adjustable pipe is used to add length to a straight length of Type B Gas Vent. The 12 in L adds 3 in L to 10 in L. This pipe requires a 2 in. overlap.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Allows 4 in. Dia DuraVent brand b-vent to be attached to the bottom of a different brand b-vent like Selkirk or metal fab back to the appliance
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- Maintains UL Listing for both brands of b-vent
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
The Model 3EFC5 EXPANDABLE FLEX CONNECTOR is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Model EFC expandable flexible gas vent connector system greatly simplifies most gas appliance vent installations
- No elbows are required for installation
- Expands 1 ft. to 3 ft. - we will need to confirm per SKU
- Limited lifetime warranty
- Integrated draft hood connector
- Provides 360° flexibility
- Connects to 4 in. rigid B-vent and appliance collar
- Allow for 1 in. clearance to combustibles
- Double Wall Design
- Connects to Selkirk Type B-Gas Vent
DuraConnect and DuraConnect II is a flexible aluminum connector system. Can not to be enclosed and cannot penetrate through walls, floors, or ceilings. Twist-lock connectors on each end for fast, easy professional installations.
- Can be used when type B gas vent double wall connector is required
- Not to be enclosed and cannot penetrate through walls, floors and ceilings
- Twist lock connectors on each end
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustible's in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
The 5 in. x 36 in. Steel Round Gas Vent Pipe is made of durable galvanized steel. Each end is die-formed for uniform sizing and strong, easy-to-connect joints. A locktab feature allows the option of installation without using sheet-metal screws. This Type B round fitting is designed for use on approved gas appliances in residential, light commercial and industrial applications. It is tested and UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel
- Gas vent pipe for use on approved gas appliances
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single- and multi-story buildings
- Type B gas vent is also referred to as b vent or type b vent
- Some common applications may include warm air furnaces, tank water heaters, residential boilers, common vented appliances and more
- Used on gas-fired category I natural draft appliances
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called duralock
The 3 in. Steel 90 degree Adjustable Gas Vent Elbow is used when an offset is required to avoid rafters, joists and other construction obstacles. It is a Type B fitting with a strong, durable, galvanized-steel outer pipe and internal spacing bends to assure a uniform insulating air space between pipe walls. Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints. A locktab feature offers the option of installation without sheet-metal screws. It is UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel outer pipe
- Use to provide an offset around rafters, joists and other construction obstacles
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single and multi-story buildings
- Internal spacing bends create a uniform insulating air space between pipe walls
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
