Searched for "40141900"
Dundas Jafine's 4 in. aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure. No tool required.
- Ideal for use with flexible or semi-rigid ducts
- Aluminum construction
- No tools necessary
- Easy operation
Heavy Gauge 4 in. Pipe is used to vent boilers, furnaces and hot water heaters. Available in a variety of common lengths, diameters and gauges to help make your next HVAC project a success. A simple snap lock design and sturdy galvanized steel construction combine for a quick and secure installation that you can rely on.
- Easy-to-install snap lock design
- Crimped end with a stop-bead for a secure interlocking fit
- Sturdy 26-Gauge, galvanized steel construction
- Always seal seams with building code approved sealant or duct tape
- Always insulate ductwork for greater system efficiency and comfort
Duct strapping is ideal for use in hanging hot air supply and cold air returns to framing members. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Galvanized steel construction resists corrosion
- Solid strapping, easy to drill or nail
- Can accept fasteners at any point along the length of the strapping
- Convenient cardboard dispenser allows for easy transport
The 5 in. Steel Storm Collar is a Type B fitting made with durable galvanized steel and is typically applied above the flashing to provide a weatherproof seal of the pipe above the roof line. It is designed for use on approved gas appliances.
- Strong, durable galvanized steel
- Apply above the flashing to provide a weatherproof seal of the pipe above the roof line
- 8-5/8 in. Dia x 1-5/8 in. length
- Type B fitting for approved gas appliances
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustible's in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and Liquified Propane (LP) category I appliances with a draft hood
- Directs rain away from the flashing to prevent water penetration in attic
- Apply 500 caulking around the edge of the storm collar and the b-vent to prevent water penetration
- Made from galvanized steel to prevent corrosion
Webbed duct straps are used to hang insulated flexible duct, round pipe or rectangular duct and helps prevent the duct system from sagging over long runs. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitech mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Webbed duct strap possesses high tensile and abrasion resistance
- Made from chemical resistant material and meets UL standard 2043
- Easy to cut and staple to joist
- Can be cut with knife or scissors
- Can be installed using nails or screws
The Model 3EFC5 EXPANDABLE FLEX CONNECTOR is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Model EFC expandable flexible gas vent connector system greatly simplifies most gas appliance vent installations
- No elbows are required for installation
- Expands 1 ft. to 3 ft. - we will need to confirm per SKU
- Limited lifetime warranty
- Integrated draft hood connector
- Provides 360° flexibility
- Connects to 4 in. rigid B-vent and appliance collar
- Allow for 1 in. clearance to combustibles
- Double Wall Design
- Connects to Selkirk Type B-Gas Vent
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and Liquified Propane (LP) category I appliances with a draft hood
- Allows 6 in. Dia DuraVent brand b-vent to be attached to the bottom of a different brand b-vent like Selkirk or MetalFab back to the appliance
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- Maintains UL listing for both brands of b-vent
The Model 4EFC5 Expandable Flex Connector is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Single Wall Expandable Flexible Gas Vent Connector.
- Designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent.
- Expandable Flex Connector eliminates the need for elbows and greatly simplifies most gas appliance vent installations.
- Available in 3" & 4" diameters.
- 3' length expands from 2' to 3.5' in length.
- 5' length expands from 2.5' to 5' in length.
- Galvanized ends
- Easier to expand to desired length
- Save time on the jobsite
- Sleek Design, Reflective Finish
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and Liquified Propane (LP) category I appliances with a draft hood
- Connects two 4 in. Dia b-vent flues to common vent to a larger 5 in. Dia b-vent to handle increased exhaust volume
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Master Flow 26-Gauge 90 Adjustable 8 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.
- Used to make angular or gradual turns in runs of pipe
- Adjustable to any angle through 90
- 26-Gauge, galvanized steel construction
- Always seal seams with building code approved sealant or duct tape (not included)
- Always insulate ductwork for greater system efficiency and comfort (not included)
This 4 in. aluminum duct connector attaches 2-pieces of 4 in. flexible duct together. It is ideal for use as both a duct connector and extending the exhaust collar of your clothes dryer. Product length is 6 in.
- All aluminum construction
- Includes 1-straight end and 1-crimped end for ease of installation
- Can be used with all types of flexible ducts
- Can be used in both gas and electric dryer applications
The 3 in. Steel 90 degree Adjustable Gas Vent Elbow is used when an offset is required to avoid rafters, joists and other construction obstacles. It is a Type B fitting with a strong, durable, galvanized-steel outer pipe and internal spacing bends to assure a uniform insulating air space between pipe walls. Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints. A locktab feature offers the option of installation without sheet-metal screws. It is UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel outer pipe
- Use to provide an offset around rafters, joists and other construction obstacles
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single and multi-story buildings
- Internal spacing bends create a uniform insulating air space between pipe walls
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Gives 4 in. b-vent run flexibility to bend around an obstruction like a stud and maintain 1 in. clearance
- Has 48 in. L to allow multiple bends
- Eliminates the need for b-vent to more easily connect an appliance to the b-vent wye or tee in the mechanical room
Type B Gas Vent adjustable pipe is used to add length to a straight length of Type B Gas Vent. The 12 in L adds 3 in L to 10 in L. This pipe requires a 2 in. overlap.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
- Used when an offset is required to avoid obstructions such asrafters, joists and other construction obstacles
- Three piece adjustable elbow twists for easy offsets
- Adjustable fittings and standard short lengths eliminate all cutting, fitting and special engineering
- Improved joint design provides for a rapid and secure connection in seconds
The Model 4EFC3 Expandable Flex Connector is designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent. Single Wall Expandable-Flexible Gas Vent Connector (EFC) offers a simple connection between appliance and Selkirk Type B vent. UL listed and only requires 1 in. minimum airspace clearance to combustibles and has multiple applications, can be for single vent or combined vent.
- Single Wall Expandable Flexible Gas Vent Connector.
- Designed for use with gas-fired appliances equipped with draft hoods and other appliances listed for use with Type B Gas Vent.
- Expandable Flex Connector eliminates the need for elbows and greatly simplifies most gas appliance vent installations.
- Available in 3" & 4" diameters.
- 3' length expands from 2' to 3.5' in length.
- 5' length expands from 2.5' to 5' in length.
- Easier to expand to desired length
- Save time on the jobsite
- Sleek Design, Reflective Finish
- Limited Lifetime warranty
The Master Flow 6 in. x 5 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 6 in. pipe to a 5 in. pipe in an HVAC system. It is suitable for most HVAC applications.
- Hemmed collar edges for an improved fit and increased strength
- Connects 6 in. pipe to 5 in. pipe in duct run
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
Master Flow 26-Gauge 90 Adjustable 4 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.
- Used to make angular or gradual turns in runs of pipe
- Adjustable to any angle through 90
- 26-Gauge, galvanized steel construction
- Always seal seams with building code approved sealant or duct tape (not included)
- Always insulate ductwork for greater system efficiency and comfort (not included)
Used to vent 2 appliances together where codes allow. Heavy duty construction meets most building codes for single wall use. Crimped branch pipe in the direction of airflow.
- 26-Gauge steel construction
- Y branch allows air to flow easily
- Crimped in the direction of airflow
- Vent multiple appliances where code allows
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Connects 4 in. Dia b-vent to the draft hood of the appliance
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Dundas Jafine's aluminum Elbows can be used to vent most types of heating units. This product features an all-aluminum, 4-piece construction and is fully adjustable to 90 degree . Includes one crimped end and one solid end to ease assembly.
- 0.016-Gauge aluminum
- Heavy-duty
- Fully adjustable to 90 degree
- 4-piece construction
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Allows 5 in. Dia DuraVent brand b-vent to be attached to the bottom of a different brand b-vent like Selkirk or MetalFab back to the appliance
- Aluminum inner wall and galvalume outer wall construction that features a industry leading twist-lock design
- Maintains UL listing for both brands of b-vent
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
The 4 in. x 6 ft. Heavy Duty Semi-Rigid Aluminum Duct with Collars is ideal when all aluminum duct is required x code in some gas and electric dryer applications. It can also be used for bathroom fan venting. This duct is totally noncombustible and has a maximum operating temperature of 435 degree F.
- Aluminum collars on both ends of the duct swivel making for easy attachment to the dryer exhaust port and exterior exhaust hood
- UL2158A listed and marked for safe dryer venting
- New manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor
- UL duct is thicker than the standard non-UL semi-rigid version that allows for a more robust installation
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Designed to meet the rugged demand of the jobsite, with its inner wall recessed to eliminate damage in handling
- 1 in. clearance to combustibles in single and multi-family dwellings
- Innovative system for a lock tight connection called DuraLock
The Master Flow 8 in. x 6 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 8 in. pipe to a 6 in. pipe in an HVAC system. It is suitable for most HVAC applications.
- Hemmed collar edges for an improved fit and increased strength
- Connects 8 in. pipe to 6 in. pipe in duct run
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
The Master Flow 4 in. Goose Neck Vent in Black can be used to cover exhaust pipes extending through your roof or for attic ventilation. This vent is designed to be used on 4 in. round ducts. It's made of zinc-coated galvanized steel for durability and reliability. This vent features a heavy-duty screen which helps protect against small animals from entering your home through the vent. The black finish helps this vent blend into your home's rooftop.
- Designed for 4 in. Round ducts
- Ideal for pitched roofs and being used for attic ventilation or to cover exhaust pipes extending through roofs
- Seal seams with code approved mastic, sealant or duct tape
- Install using appropriate roofing nails (not included)
- Heavy-duty screen helps protect against small animals from entering
- Ample flashing for added leak protection
- Black finish helps blend into rooftops
- Always seal flashing with approved roof sealant
The Master Flow 26 Gauge 7 in. x 6 in. Flat Reducer is made OG galvanized steel. Its short length makes it ideal for tight spaces. The reducer is used to transition from a 7 in. pipe to a 6 in. pipe system. It is suitable for most HVAC applications.
- 26-Gauge, galvanized steel construction for durability
- Connects 7 in. pipe to 6 in. pipe in duct run
- Connect using sheet metal screws (not included)
- Universal - not crimped
- Can be crimped as needed
These Worm Clamps are ideal for attaching aluminum ducts to other aluminum products, including elbows and pipe. Easily adjustable with the turn of a screwdriver, these clamps can be used with all venting applications. A heavy-duty galvanized steel construction ensures longevity through a variety of uses. For optimal performance, it is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.
- Made of heavy duty galvanized steel
- Easily adjustable using a hex or flat head screwdriver
- Adjusts from 5-1/8 in. to 6-1/2 in.
- Can be used in all venting applications
Used to vent 2 appliances together where codes allow. Heavy duty construction meets most building codes for single wall use. Crimped branch pipe in the direction of airflow.
- 26-Gauge steel construction
- Y branch allows air to flow easily
- Crimped in the direction of airflow
- Vent multiple appliances where code allows
Master Flow 4 in. Aluminum Elbow makes venting a boiler, furnace or hot water heater a snap, installing on an angle up to 90 via a crimped-end design that makes it easy to affix. The elbow fits roundest aluminum pipes with 4 in. Dia Ideal for use in high-heat applications. Ships in 90 position.
- Durable aluminum construction
- Designed to fit round piping so that you can vent boilers, furnaces and hot water heaters on an angle
- Light-weight, crimped-end design installs easily and provides a secure fit
- Seam seal using building code approved sealant or duct tape for a quick and easy finishing touch
- Fits most round aluminum pipes with 4 in. Dia
- Adjustable design allows use at angles up to 90
- For reliability in high-heat applications
The Master Flow Air-Tite 6 in. Take-Off provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. The built in damper allows adjusting air flow in the duct run. The Air-Tite Take-Off can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.
- Built-in damper
- Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
- Install with sheet metal screws (not included)
- Fits most HVAC types for universal application
- Tacky gasket helps create a secure, airtight seal
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
The Master Flow 10 in. x 4 in. x 6 in. 90 degree Register Box creates a right-angle transition from round pipe or insulated flexible duct to an air register. This box is made of galvanized steel. It can be installed with sheet metal screws. It is suitable for most HVAC applications.
- Creates a right-angle transition from 6 in. round pipe or insulated flexible duct to a 10 in. x 4 in. air register
- Install with sheet metal screws (not included)
- Always seal seams with code-approved mastic, sealant or duct tape (not included)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
Master Flow 26-Gauge 90 Adjustable 10 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.
- Used to make angular or gradual turns in runs of pipe
- Adjustable to any angle through 90
- 26-Gauge, galvanized steel construction
- Always seal seams with building code approved sealant or duct tape (not included)
- Always insulate ductwork for greater system efficiency and comfort (not included)
The 3 in. x 24 in. Round Type B Gas Vent Pipe adds versatility to installation with the exclusive lock tab feature. Constructed of strong, durable galvanized steel, this pipe is built to last. It is designated for use on approved gas appliances in residential, light commercial and industrial applications.
- Constructed of strong, durable galvanized steel
- Die-formed ends to assure uniform sizing
- For use on approved gas appliances in residential, light commercial and industrial applications
- Exclusive lock tab feature adds versatility to installation
- Fits most 3 in. pipes
- In accordance with national fire protection association NFPA54 and Nfpa211 standards
- Type B gas vent is also referred to as b vent or type b vent
- Some common applications may include warm air furnaces, tank water heaters, residential boilers, common vented appliances and more
- Used on gas-fired category I natural draft appliances
Master Flow Drive Cleats and S Cleats are used to join sections of rectangular duct and stack duct in. HVAC systems. These cleats are sleeves of galvanize steel that help to securely assemble the top and bottom (S) and left and right sides (Drive) of rectangular duct runs. S cleats are used to connect the long side of the duct, while Drive cleats are used to connect the short side.
- Always seal seams with code approved mastic or sealant (or duct tape)
- Always insulate ductwork for greater system efficiency and comfort
- S cleats secure bare edges of rectangular duct
- Insulate ductwork to promote system efficiency
The 4 in. x 4 in. x 4 in. Steel Gas Vent Tee is a Type B fitting used to transition a system from horizontal to vertical orientation. It provides easy access for inspection and maintenance. It has a strong, durable, galvanized-steel outer pipe with internal spacing bends that assure a uniform insulating air space between pipe walls. Each end is die-formed for uniform sizing and strong, easy-to-connect joints. A locktab feature offers the option of installation without sheet-metal screws. It is UL listed for safety in accordance with NFPA standards.
- Strong, durable galvanized steel outer pipe
- Use to transition a system from horizontal to vertical orientation
- Locktab feature can be used instead of sheet-metal screws for ease of installation
- Each end is die-formed to assure uniform sizing for strong, easy-to-connect joints
- Tested and listed per UL 441 for installation in single and multi-story buildings
- Internal spacing bends create a uniform insulating air space between pipe walls
- Easy access for inspection and maintenance
Double Wall Construction
- Non-Positional Locking System Makes Installation A Snap
- No Tools Required For Disassembly
Master Flow Standard 90 Adjustable 3 in. Elbow is used to make turns in runs of round pipe and flexible duct through 90. It has a sturdy galvanized steel construction and is simple to adjust. It is also crimped on 1 end to easily fit into a pipe or other fitting of the same diameter. Ships in 90 position.
- Used to make angular or gradual turns in runs of pipe
- Adjustable to any angle through 90
- 30-Gauge, galvanized steel construction
- Always seal seams with building code approved sealant or duct tape (not included)
- Always insulate ductwork for greater system efficiency and comfort (not included)
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Adds 22.5 in. L to a 5 in. Dia installation
- Aluminum inner wall and galvalume outer wall construction that features an industry leading twist-lock design
- 1 in. clearance to combustibles in a single or multi-family dwelling applications
Flex Adapters connect the Flexible Elbow to the 3.75" (100mm) Duct. . Weather Resistant Pvc, Uv Stabilized & Fire Resistant. Tested To Over 2,000 Hours. Temperature Range -4degree f To 140degree F. Complements any residential or commercial building. Available in SD77 (2 3/4"), SD100 (3 3/4"), SD140 (51/2") and 4 color options (white, ivory, black and brown) . 78" duct lengths and 15 fittings ensure complete flexibility of installation. Mfg #85109
- Flex Adapters connect the Flexible Elbow to the 3.75" (100mm) Duct.
- Weather resistant PVC, UV stabilized & fire resistant. Tested to over 2,000 hours. Temperature range -4degree F to 140degree F
- Complements any residential or commercial building. Available in SD77 (2 3/4"), SD100 (3 3/4"), SD140 (51/2") and 4 color options (white, ivory, black and brown)
- 78" duct lengths and 15 fittings ensure complete flexibility of installation
The Master Flow 10 in. x 10 in. x 8 in. Ceiling Register Box is made of 30-Gauge, zinc-coated, galvanized steel. It is designed for a transition from round pipe or insulated flexible duct to an air register or grille. It can be installed with sheet metal screws (not included).
- Designed for a transition from round pipe or insulated flexible duct to an air register or grille
- Can be installed with sheet metal screws (not included)
- Maximum temperature rating of 390 degree F
- Minimum temperature rating of -100 degree F
Type B Gas Vent designed to the demands of the common category I appliance installation. Engineered to heat up rapidly and remain hot during the appliance operation to allow for minimal condensation. An innovative system for a lock tight connection called DuraLock.
- Use with natural gas and liquified propane (LP) category I appliances with a draft hood
- Replacement tee cap for 6 in. Dia DuraVent B-vent
- Prevents flue gases from leaking out the 6 in. Dia b-vent tee
- Allows easy access to vent run for cleaning and inspection thru the b-vent tee
The Master Flow Air-Tite 6 in. Take-Off provides an airtight seal when connecting insulated flexible duct or round pipe to a flat surface. This take-off can be used to redirect air from any side of the plenum or to transition from a rectangular pipe run. It can be installed with sheet metal screws (sold separately) and is suitable for most HVAC applications.
- Can be used to route air from any side of the plenum or to transition from a rectangular pipe run
- Install with sheet metal screws (not included)
- Fits most HVAC types for universal application
- Tacky gasket helps create a secure, airtight seal
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)