The KING Electric PHM-1 Milk house heater is designed for garage/shop applications where supplemental heat is needed. Made completely of metal, this durable little heater will provide plenty of heat for your work bench and other garage/shop applications. The easy to use thermostat allows you to adjust the heat output to the perfect level depending on the size of space needing heat.

• Fan/low/high/off switch
• Ni-chrome heating element
• 6 ft. cord and plug
• Safety tip over switch
• Adjustable thermostat
• Carrying handle
• All metal construction
• Power indicator light

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

The EKB 5000-Watt heater is designed for the garage/shop area that needs the occasional temporary comfort level heating. The perfect garage or shop heater for occasional, temporary comfort heating. Thermostat will control from 40 to 85 degree . Bracket can be wall or ceiling mounted at a minimum of 6 ft. above the floor. Good air distribution and comfort is achieved by swiveling bracket to specific work area.

• Perfect garage or shop heater for occasional, temporary comfort heating
• Operation range 40 degree F to 85 degree F
• Rigid muscovite mica construction with 80-20 nichrome heating wire
• Durable powder coated finish

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

The KING Electric PGH Series garage heater is a rugged portable heater designed to provide a high capacity heating source at an affordable price. Perfectly suited for workshops, garages or construction sites. Use the built-in mechanical thermostat to easily set the desired temperature. The SureStop temperature-limiting feature provides auto-rest protection from overheating. Requires 20A-240V NEMA #6-20R receptacle, will not work with standard 120V receptacle.

• Built-in thermostat and on / off switch
• Carrying handle with built-in cord storage
• Stainless steel heating element
• Auto-reset fan delay increases efficiency
• Overheat safety limit protection
• 6 ft. cord and 240-Volt plug
• Durable scratch and rust resistant finish
• Universal wall / ceiling bracket included
• Requires 20A-240V NEMA #6-20R receptacle, will not work with standard 120V receptacle

The KING Electric PUH utility heater packs a big punch in a small frame. This utility heater is designed to provide supplemental heat for small areas at an affordable price. Made completely of metal, this heater is durable enough for any application. Easily set the desired temperature with the built-in thermostat.

• Built-in thermostat
• Dual on/off switches
• 6 ft. cord and plug
• Rugged metal case
• Comfort grip handle
• Long lasting ceramic heating element
• Power indicator light
• Powder coated finish

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

The KBP is an excellent choice for a garage or shop heater; it easily has the capacity to heat a large space. It has a flow through design which means it pulls the air from the back of the heater and discharges out the front for efficient air movement. This is a rugged heater with quality components that is suitable for commercial applications as well. It comes standard with a 3-position switch and an accurate built-in thermostat that has degrees on the label for precise temperature control. Also comes with fan delay to help dissipate the heat from the elements.

• Quality components
• Suitable for commercial applications
• Built-in thermostat
• Degrees on the label for precise temperature control

The PSH is a higher power portable heater designed to provide a back-up heating source at an affordable price. Perfectly suited for a small workshop, garage or construction sites. The convenient 6 ft. cord allows greater mobility to areas needing heating. Easily set the desired temperature with the built-in thermostat. Sure, stop high-limit temperature control provides overheat protection. 120-Volt 1500-Watt may be plugged into standard NEMA 5-15 120-Volt outlet. Stainless steel construction.

• 120-Volt 1500-Watt may be plugged into a standard NEMA 5-15 120-Volt outlet
• Solid stainless steel construction
• High-limit temperature control
• Built-in thermostat