Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 72-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,500-Watt heater effectively warms up to 175 sq. ft. (small to medium-sized rooms)
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The 1250-Watt Surface-Mount Fan-Forced Ceiling Heater from Broan features an enclosed, sheathed element and a built-in fan to help evenly disperse heat. Ideal for a mudroom, bathroom, den, office or other cold areas of the house, this ceiling fan offers a lubricated motor for years of maintenance-free operation. The low-profile design mounts to a standard 3-1/2 in. or 4 in. round electrical box or a 4 in. octagon ceiling box.

• Enclosed, sheathed element produces 1250-Watt of heat at 120-Volt power to disperse warmth evenly
• Automatic overheat protection helps prevent damage
• Durable aluminum construction offers lasting performance
• Built-in fan helps distribute heat uniformly
• Low-profile design mounts easily to a standard 3-1/2 in. or 4 in. round electrical box or 4 in. octagon ceiling box
• Satin aluminum finish complements any interior decor
• Meets UL listing safety standards
• Suitable for indoor use only
• Measures 11 in. Dia x 2.8 in. H
• For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am - 7:00 pm EST.

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in low position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Single pole (2-wire) low setting
• For use with cadet electric baseboards only
• 22 Amp

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 1000-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 150 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. Contemporary design compliments any decor.

• Patented CLIP-N-FIT feature allows installer to change the desired wattage output without moving the jumper wire
• Dual protection: self-hold limit with one-time thermal fuse
• Thermostat with positive off position for added safety on all models
• Efficient quiet operation from smooth running multi-layer impeller

This single pole, single stage non-programmable thermostat control is unit mounted. Range is 45-85 degrees and mounts inside the wiring compartment of the heater. All hardware is included.

• 40-85 degree range
• Non-programmable
• Single pole, single stage
• Compatible with all models except for 5kW, 3 phase models

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

For quiet, comfortable heating, This 120-Volt, 60 in. 1250-Watt baseboard heater is perfect. These fan-free heating units deliver warmth and comfort in a low-profile housing that's safe to install on the wall or directly on carpet, tile or other flooring. They are suitable for primary heating or secondary heating solutions.

• Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling
• Heat your space without kicking up dust or other allergens, the natural convection airflow doesn't rely on a blower or fan to move warm air throughout the room
• Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp
• For worry-free warmth, these UL Listed baseboard heaters offer an overheat protection feature that prevents the unit from running when its air intake is blocked

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Easy to install and operate, this Cadet baseboard-mount double-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position and additionally an off setting for added peace of mind.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 4-wire installation (double-pole) and includes an off setting
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in off position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Double pole (4-wire) positive off
• For use with cadet electric baseboards only
• 22 Amp

The Oscillating Ceramic Heater is perfect for commercial settings where safe supplemental heat is needed such as offices, hospitals, schools, meeting rooms and more. The heater can be set to oscillate for total room coverage or be locked in place for directional warmth. The ceramic heating element provides up to 1500-Watt of supplemental heating power.

• Self-regulating ceramic heating element
• Durable impact resistant plastic construction
• Wide spread oscillation for total room coverage
• 6 ft., 3-conductor grounded cord set
• Top mounted controls with a multi-function remote control
• Programmable thermostat with a 7-hour timer
• Quiet operation
• Carry handle for easy transportation
• Fully assembled

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Mounts horizontally or vertically Heavy gauge die-formed housing Advanced pull-through air flow design Completely enclosed fan motor Aluminum-finned, copper clad steel sheath heating element has longer useful life Automatic reset linear thermal cut-out 2-speed fan selector switch (25 to 50 kw models) Fan delay feature eliminates cold drafts Individually adjustable discharge louvers to control air flow UL Listed.

• Wall heaters pull-through design draws air in across the heating element, so it runs cooler while providing an even blanket of comfort across its output range
• A linear thermal cutout provides automatic protects the entire length of the heating element, plus, most models feature a 24-Volt control transformer for safer temperature adjustment
• Heater is equipped with individually adjustable louvers that aim your warmth where you need it most, a venturi outlet delivers the additional airflow you need to mount the unit vertically
• Steel sheath heating element is clad in copper and outfitted with aluminum fins, this sophisticated design helps the heater run more safely and cool down faster

Simple to use, twist dial mechanical single-pole thermostat. Can replace most wall-mounted line voltage thermostats and the color-coded wires make installation simple. A cost-effective and easy way to control room temperature.

• For use with line voltage 120, 240 or 208-Volt electric baseboard and wall heaters (controls up to 5,280-Watt at 240-Volt or 2,640-Watt at 120-Volt output)
• Easily replaces most line voltage wall-mounted thermostats
• Simple 2-wire installation (single-pole)
• 22 Amp
• Thermostat temperature range is 40°F - 85°F
• White
• UL listed in the US and Canada for safety compliance
• 1-year limited warranty

An ideal choice for heating larger rooms with just one heater--two heaters behind a single grille quickly heat a large area and help eliminate drafts and cold spots in your open areas, such as a foyer. A simple and affordable way to add extra warmth to any living space. The Com-Pak Twin fan-forced in-wall electric heater features a recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat. Built-in thermostat included.

• Hard-wired 4,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Two fans and two fast-heating coil elements quickly warm a space up to 500 sq. ft.
• 4,000-Watt output with 240-Volt wiring (16.7 Amps, 13,650 BTUs) or 3,000-Watt output with 208-Volt wiring (14.4 Amps, 10,240 BTUs)
• Space-saving, recess-mount design for larger rooms. Rough-in dimensions: 14.5 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed for safety
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance

These series wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• For wide open spaces like entryways and vestibules, basements, playrooms and mechanical areas, this unit provides fast-acting heat
• 4000-Watt of power provide fast-acting, robust heat right where you need it, with no need for venting or exhaust
• Unit's safety protection will shut the unit off before it overheats if the unit is accidentally blocked
• Prolongs the life of the heating element by keeping the fan off until the element is at the proper temperature
• Factory-installed, double-pole thermostat with a positive On/Off position is included for easy installation and convenient control

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 500-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 75 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heaters label if replacing

Visionair 9" 1500/750W Ceramic Heater.

• Ceramic Heater Is The Perfect Option For Those Needing A Reliable Heating Solution
• That Packs Powerful Heat In A Compact Size For Small Or Medium Sized Rooms
• This Heater Features Easy To Use Mechanical Controls, Adjustable Thermostat, Fan-Only Mode For All-Season Use And Durable Safety Grill.
• 1VAHC9