The 1250-Watt Surface-Mount Fan-Forced Ceiling Heater from Broan features an enclosed, sheathed element and a built-in fan to help evenly disperse heat. Ideal for a mudroom, bathroom, den, office or other cold areas of the house, this ceiling fan offers a lubricated motor for years of maintenance-free operation. The low-profile design mounts to a standard 3-1/2 in. or 4 in. round electrical box or a 4 in. octagon ceiling box.

• Enclosed, sheathed element produces 1250-Watt of heat at 120-Volt power to disperse warmth evenly
• Automatic overheat protection helps prevent damage
• Durable aluminum construction offers lasting performance
• Built-in fan helps distribute heat uniformly
• Low-profile design mounts easily to a standard 3-1/2 in. or 4 in. round electrical box or 4 in. octagon ceiling box
• Satin aluminum finish complements any interior decor
• Meets UL listing safety standards
• Suitable for indoor use only
• Measures 11 in. Dia x 2.8 in. H
• For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am - 7:00 pm EST.

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 72-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,500-Watt heater effectively warms up to 175 sq. ft. (small to medium-sized rooms)
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in low position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Single pole (2-wire) low setting
• For use with cadet electric baseboards only
• 22 Amp

Visionair 9" 1500/750W Ceramic Heater.

• Ceramic Heater Is The Perfect Option For Those Needing A Reliable Heating Solution
• That Packs Powerful Heat In A Compact Size For Small Or Medium Sized Rooms
• This Heater Features Easy To Use Mechanical Controls, Adjustable Thermostat, Fan-Only Mode For All-Season Use And Durable Safety Grill.
• 1VAHC9

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in off position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Double pole (4-wire) positive off
• For use with cadet electric baseboards only
• 22 Amp

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 120-Volt wiring (single breaker). Before you purchase, confirm you have 120-Volt power supply (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 120-Volt wiring (8.3 Amps, 3,415 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

For true zonal heating in a compact design that fits in anywhere, choose this wall heater. Its fast-response heating element kicks in quickly, providing warmth for your bedroom, bathroom or hallway. The patented CLIP-N-FIT system, thermal fuse and self-hold limit makes installing it on the wall safe and easy.

• Warm up the room rapidly with this reliable wall heater; its fast-response element delivers warmth instantly
• Get reliable zonal heating without cold spots; the unit's multi-layer impeller delivers consistent airflow in an energy-efficient design
• Compact design fits well in bathrooms, bedrooms and hallways for comfortable living all year round
• Unit features a self-hold limit to protect against overheating, with a 1-time thermal fuse backup

The Oscillating Ceramic Heater is perfect for commercial settings where safe supplemental heat is needed such as offices, hospitals, schools, meeting rooms and more. The heater can be set to oscillate for total room coverage or be locked in place for directional warmth. The ceramic heating element provides up to 1500-Watt of supplemental heating power.

• Self-regulating ceramic heating element
• Durable impact resistant plastic construction
• Wide spread oscillation for total room coverage
• 6 ft., 3-conductor grounded cord set
• Top mounted controls with a multi-function remote control
• Programmable thermostat with a 7-hour timer
• Quiet operation
• Carry handle for easy transportation
• Fully assembled

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This almond 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty
• ETL listed for safety
• Lifetime warranty
• Almond color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This almond 30-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 500-Watt heater effectively warms up to 75 sq. ft. (small-sized rooms)
• 500-Watt output with 240-Volt wiring (2.1 Amps, 1,710 BTUs) or 375-Watt output with 208-Volt wiring (1.8 Amps, 1,280 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty
• ETL listed for safety
• Lifetime warranty
• Almond color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. Contemporary design compliments any decor.

• Patented CLIP-N-FIT feature allows installer to change the desired wattage output without moving the jumper wire
• Dual protection: self-hold limit with one-time thermal fuse
• Thermostat with positive off position for added safety on all models
• Efficient quiet operation from smooth running multi-layer impeller

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• Set this commercial wall heater to fan only mode for added air circulation or to keep things cool during the warmer months
• Wall heater has a fan delay feature that waits until the unit warms up to begin blowing air into the room; the fan keeps operating until the unit cools down, so you get maximum heating performance
• Commercial wall heater features an integral double-pole thermostat for easy temperature adjustment whenever you need to make a change
• Wall heater features a permanently lubricated fan motor, so it will be ready for long-term operation with little required maintenance

Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat you need for maximum efficiency. This hard-wired electric heater warms small to medium sized rooms up to 175 sq. ft.

• Hard-wired multi-volt fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply. No need to worry about damaging the heater or whether you have 120-Volt, 208-Volt, or 240-Volt wiring. Before purchasing, confirm your power supply voltage to determine the heater's output (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Multi-Volt options: 1,600-Watt output at 240 volts (6.7 Amps, 5,460 BTUs); 1,500-Watt output at 208 volts (7.2 Amps, 5,120 BTUs); 1,000-Watt output at 120 volts (8.3 Amps, 3,412 BTUs)
• Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in digital thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Complete unit includes wall can, heat box and grill and digital thermostat
• Tamper-proof settings let you lock in minimm and maximum temperature points and a fan-only mode lets you circulate air year round without heat
• ETL listed in the US and Canada for safety compliance
• 5-year limited warranty

Simple to use, twist dial mechanical single-pole thermostat. Can replace most wall-mounted line voltage thermostats and the color-coded wires make installation simple. A cost-effective and easy way to control room temperature.

• For use with line voltage 120, 240 or 208-Volt electric baseboard and wall heaters (controls up to 5,280-Watt at 240-Volt or 2,640-Watt at 120-Volt output)
• Easily replaces most line voltage wall-mounted thermostats
• Simple 2-wire installation (single-pole)
• 22 Amp
• Thermostat temperature range is 40°F - 85°F
• White
• UL listed in the US and Canada for safety compliance
• 1-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

For uniform heat in any room, choose this portable baseboard heater. Its variable wattage element provides comfort from floor to ceiling, without hot or cold spots, using natural convection currents to move warm air instead of a fan or blower. Its low-profile design means you can tuck it away in your den, bathroom, living room or bedroom without worrying about overheating, thanks to its automatic thermal cutoff function.

• Start heating immediately, this portable baseboard heater comes equipped with a standard 120-Volt plug, so you can quickly add it to any room that needs extra warmth
• Keep dust and other particles from circulating, thanks to this hydronic baseboard heaters fan less operation, with no blower or exhaust fan, allergens and dander won't be blowing around the room
• For maximum efficiency, the unit converts all incoming electric energy into heat, according to department of energy standards
• For worry-free warmth, the unit's overheat protection feature prevents the heater from running when its air intake is blocked
• Baseboard heater installs unobtrusively in bedrooms, bathrooms, living rooms and dens, thanks to its low-profile design

Easy to install and operate, this Cadet baseboard-mount single-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position that turns the heater on in cold rooms automatically.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 2-wire installation (single-pole)
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

This Unit Mounted Double Stage, double pole control mounts in the wiring compartment of the unit heater. Provides a positive off for cutting power to heater. All hardware is included.

• For use with all 3 phase unit heaters
• 40-85 degree heat range
• 2-stage, double throw
• All hardware included

These series wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• For wide open spaces like entryways and vestibules, basements, playrooms and mechanical areas, this unit provides fast-acting heat
• 4000-Watt of power provide fast-acting, robust heat right where you need it, with no need for venting or exhaust
• Unit's safety protection will shut the unit off before it overheats if the unit is accidentally blocked
• Prolongs the life of the heating element by keeping the fan off until the element is at the proper temperature
• Factory-installed, double-pole thermostat with a positive On/Off position is included for easy installation and convenient control

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 1000-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 150 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

An ideal choice for heating larger rooms with just one heater--two heaters behind a single grille quickly heat a large area and help eliminate drafts and cold spots in your open areas, such as a foyer. A simple and affordable way to add extra warmth to any living space. The Com-Pak Twin fan-forced in-wall electric heater features a recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat. Built-in thermostat included.

• Hard-wired 4,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Two fans and two fast-heating coil elements quickly warm a space up to 500 sq. ft.
• 4,000-Watt output with 240-Volt wiring (16.7 Amps, 13,650 BTUs) or 3,000-Watt output with 208-Volt wiring (14.4 Amps, 10,240 BTUs)
• Space-saving, recess-mount design for larger rooms. Rough-in dimensions: 14.5 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed for safety
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 500-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 75 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heaters label if replacing

This single pole, single stage non-programmable thermostat control is unit mounted. Range is 45-85 degrees and mounts inside the wiring compartment of the heater. All hardware is included.

• 40-85 degree range
• Non-programmable
• Single pole, single stage
• Compatible with all models except for 5kW, 3 phase models

For quiet, comfortable heating, This 120-Volt, 60 in. 1250-Watt baseboard heater is perfect. These fan-free heating units deliver warmth and comfort in a low-profile housing that's safe to install on the wall or directly on carpet, tile or other flooring. They are suitable for primary heating or secondary heating solutions.

• Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling
• Heat your space without kicking up dust or other allergens, the natural convection airflow doesn't rely on a blower or fan to move warm air throughout the room
• Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp
• For worry-free warmth, these UL Listed baseboard heaters offer an overheat protection feature that prevents the unit from running when its air intake is blocked

Mounts horizontally or vertically Heavy gauge die-formed housing Advanced pull-through air flow design Completely enclosed fan motor Aluminum-finned, copper clad steel sheath heating element has longer useful life Automatic reset linear thermal cut-out 2-speed fan selector switch (25 to 50 kw models) Fan delay feature eliminates cold drafts Individually adjustable discharge louvers to control air flow UL Listed.

• Wall heaters pull-through design draws air in across the heating element, so it runs cooler while providing an even blanket of comfort across its output range
• A linear thermal cutout provides automatic protects the entire length of the heating element, plus, most models feature a 24-Volt control transformer for safer temperature adjustment
• Heater is equipped with individually adjustable louvers that aim your warmth where you need it most, a venturi outlet delivers the additional airflow you need to mount the unit vertically
• Steel sheath heating element is clad in copper and outfitted with aluminum fins, this sophisticated design helps the heater run more safely and cool down faster

These series wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• For wide open spaces like entryways and vestibules, basements, playrooms and mechanical areas, this unit provides fast-acting heat
• 4800-Watt of power provide fast-acting, robust heat right where you need it, with no need for venting or exhaust
• Unit's safety protection will shut the unit off before it overheats if the unit is accidentally blocked
• Prolongs the life of the heating element by keeping the fan off until the element is at the proper temperature
• Factory-installed, double-pole thermostat with a positive On/Off position is included for easy installation and convenient control

The KING Electric PHM-1 Milk house heater is designed for garage/shop applications where supplemental heat is needed. Made completely of metal, this durable little heater will provide plenty of heat for your work bench and other garage/shop applications. The easy to use thermostat allows you to adjust the heat output to the perfect level depending on the size of space needing heat.

• Fan/low/high/off switch
• Ni-chrome heating element
• 6 ft. cord and plug
• Safety tip over switch
• Adjustable thermostat
• Carrying handle
• All metal construction
• Power indicator light

Easy to install and operate, this Cadet baseboard-mount double-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position and additionally an off setting for added peace of mind.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 4-wire installation (double-pole) and includes an off setting
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

Visionair 23" 1500/750W Infrared Radiant Tower Heater.

• This Powerful Heater Is Perfect For Small To Medium Sized Spaces
• Thermostat And Three Quartz Tubes For Maximum Heat Output
• A Durable Safety Grill And Cool Touch Handle Ensure Your Family's Safety
• 1VAHQ23

Visionair 10" 1500/750W Oscillating Ceramic Heater.

• Wide Oscillation Ensures Maximum Heat Dispersion, While Its Adjustable Thermostat And Dual Heat Settings (1500/750 Watt) Allow You To Customize Your Comfort With Ease
• The Fan-Only Mode Provides All-Season Use, And Its Durable Safety Grill
• Cool-Touch Handle, And Quiet Operation
• 1VAHC10

Give your furnace a fresh look with the Williams Face Panel Replacement for Monterey Furnaces. The furnace cover is constructed with heavy-gauge metal for long-lasting use. The soft white finish offers a classic look.

• Durable heavy-gauge metal construction
• Soft white finish
• Replacement cover for your furnace
• For use with monterey furnace models 2509621, 2509622, 3509621, 3509622, 5009621 (2 required) and 5009622 (2 required) (sold separately)
• Original factory replacement part