Searched for "40101819"
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 66% AFUE heats approximately 675 sq. ft.
- Sealed combustion makes this a great heater for garage or workshop heating. Requires no inside room air.
- No electricity required - continues working during power outage
- "Matchless" Pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard - Keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.
- Two-sided heating warms 2 adjacent rooms with 25,000 BTU/hour on each side to heat approximately 1,150 sq. ft.
- High-efficient 70% AFUE with 74% thermal efficiency
- No electricity required - continues working during power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
- 1 in. side clearance
- Higher gauge steel for quiet operation
- Optional blowers improve air circulation
- High altitude and gas conversion kits available
- Thermostat sold separately
The Mr. Heater 6,000 BTUs - 18,000 BTU portable cabinet heater is ideal for all outdoor applications. It requires no electricity and is whisper quiet. With clean, odor-free operation, an oxygen depletion sensor (ODS) and accidental tip-over safety shut-off, you'll enjoy years of comfortable, safe heat. Heats up to 450 sqft. and has 3 heat settings - 6,000 BTUs, 12,000 BTUs and 18,000 BTUs. To operate, just connect to a 20 lbs. propane tank using the included hose and regulator, stow the tank in the cabinet behind the burner, then simply push and rotate the knob to pilot and the piezo sparking mechanism will take care of the rest while you enjoy quiet, radiant warmth. Operates up to 72-hours on a 20 lbs. propane tank on low setting and is CSA certified.
- Radiant propane heater with 20 lbs. tank storage cabinet for easy portability
- High-medium-low settings: 18,000 BTUs to 12,000 BTUs to 6,000 BTUs
- Heats up to 450 sq. ft.
- Tip-over safety shut-off switch and low oxygen safety shutoff sensor
- Approximate 72-hour run-time on low setting with a 20 lb. propane tank
- One-button piezo ignition - no electricity required
- Quiet, odorless and clean burning
- Constructed of rugged 0.08 mm steel with heavy-duty lockable casters
- Outdoor use only
- Ideal for: patios, workshops, garages, semi-enclosed indoor and outdoor construction sites and commercial construction environments (proper ventilation required)
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 66% AFUE heats approximately 675 sq. ft.
- Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
- No electricity required - continues working during power outage
- "Matchless" pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 75% AFUE heats approximately 750 sq. ft.
- Intermittent pilot ignition helps ensure a fast start
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low-cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 66% heats approximately 675 sq. ft.
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- Sealed combustion makes this a great heater for garage or workshop heating requires no inside room air
- No electricity required continues working during power outage
- Matchless pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 68% AFUE heats approximately 600 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Product must be installed by licensed contractor
Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 75% AFUE heats approximately 750 sq. ft.
- Intermittent pilot ignition helps ensure a fast start
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Recommended for professional purchase only
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low-cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 67% AFUE heats approximately 550 sq. ft.
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
- No electricity required continues working during power outage
- "Matchless" pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
- Attractive, soft-white finish
Williams Forsaire Direct Vent Wall Heater has a counterflow blower system which uses outside air and circulates the warm air from the ceiling to the floor. This helps equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.
- High-efficient 75% AFUE heats approximately 775 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
- Soft white, heat resistant contemporary finish complements any decor
- Optional side outlet registers deliver additional heat to adjacent room
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Optional vent shield deflector - insulated, galvanized steel for exterior surface protection
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams' Monterey wall heaters is affordable and energy efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.
- High-efficient 71% AFUE with approximately 600 sq. ft.
- No electricity required - continues working during power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
- 4 in. side clearance
- Higher gauge steel for quiet operation
- High altitude and gas conversion kits available
- Optional blowers improve air circulation
- Optional rear outlet registers deliver additional heat to the room behind the heater
- Thermostat sold separately
- Resettable vent limit switch
- May be converted to natural with the purchase of gas conversion kit number 8915
- Durable, ceramic-coated combustion chamber increases efficiency
- Exclusive, patented design for higher efficiency
- Automatic temperature and safety controls
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 71% AFUE heats approximately 575 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% AFUE heats approximately 850 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 70% heats approximately 800 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Factory installed ceramic fiber logs for enhanced fireplace look and added room appeal
- Contemporary black, powder-coat, scratch-resistant finish to compliment any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
This Black Radiant 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution, even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat, warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.
- Blue flame burner for even, convection heat
- Heats up to 1000 sq. ft.
- Automatic low oxygen shutoff system
- Thermostat for automatic temperature control
- Quiet integrated blower for gentle circulation of heated air
- 4,500 ft. high altitude restriction
Williams' Forsaire Direct Vent Wall Heater has a counterflow Blower system which uses outside air and circulates the warm air from the ceiling to the floor. This helps equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.
- High-efficient 75% AFUE heats approximately 775 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
- Soft white, heat resistant contemporary finish complements any decor
- Optional side outlet registers deliver additional heat to adjacent room
- Optional 1-awy or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Optional vent shield deflector insulated, galvanized steel for exterior surface protection
- Vent cap includes built-in bird guard keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
- Product must be installed by licensed contractor
Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.
- High-efficient 66% AFUE heats approximately 700 sq. ft.
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- No electricity required -continues working during power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
- 1 in. side clearance
- Higher gauge steel for quiet operation
- High altitude and gas conversion kits available
- Optional blowers improve air circulation
- Optional rear outlet registers deliver additional heat to the room behind the heater
- Thermostat sold separately
Williams' Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% AFUE heats approximately 1400 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Soft-white finish
- Must be vented vertically through the roof, additional venting material may be required to complete installation
- ANSI certified
Williams Forsaire direct vent wall heater has a counterflow blower system. This uses outside air and circulates the warm air from the ceiling to the floor to help equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.
- High-efficient 77% heats approximately 900 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
- Soft white, heat resistant contemporary finish complements any decor
- Optional side outlet registers deliver additional heat to adjacent room
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Optional vent shield deflector insulated, galvanized steel for exterior surface protection
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 75% AFUE heats approximately 750 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams' Forsaire Direct Vent Wall Heater has a counterflow blower system which uses outside air and circulates the warm air from the ceiling to the floor. This helps equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall. These models include an electrical service cord.
- High-efficient 77% afue heats approximately 900 sq. ft.
- Intermittent pilot ignition helps ensure a fast start
- Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
- Soft white, heat resistant contemporary finish complements any decor
- Optional side outlet registers deliver additional heat to adjacent room
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Optional vent shield deflector - insulated, galvanized steel for exterior surface protection
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% AFUE heats approximately 700 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Requires outside ventilation (venting not included)
- Rated for elevations 0 ft. to 2000 ft.
- Dimensions: 30 in. W x 16 in. D x 32-7/8 in. H
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
- Product must be installed by licensed contractor
Motorized Rear Outlet Register for use when furnace is recessed for Monterey Top-Vent furnaces. Chain operated damper with register flush on rear wall. Adjusts the amount of heat delivered through rear register.
- Adjust the amount of heat from your Monterey furnace
- For use with Williams brand Monterey series furnaces with a recessed installation only
- Motorized for increased airflow
- Manufactured with quality parts
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 70% AFUE heats approximately 800 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- May be converted to natural gas with the purchase of gas conversion kit number 8952 (sold separately)
- Dimensions: 34 in. W x 19-5/8 in. D x 32-7/8 in. H
- Optional blower kit (model 2102) sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
- Product must be installed by licensed contractor
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% AFUE heats approximately 600 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty installation guide for more details
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside. This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Venting material not included.
- High-efficient 68% heats approximately 600 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Recommended for professional purchase only
- Dimensions: 30 in. W x 16 in. D x 32-7/8 in. H
- Optional blower kit (model 2102) sold separately
- For installation be certified technician
- Recommended for professional purchase only
Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.
- 58% AFUE with70% heats approximately 700 sq. ft.
- No electricity required; great for backup heat during a power outage
- Fitted with an automatic floor register grille temperature control
- Resettable vent-limit safety switch and "matchless" pilot igniter
- Long-life and quiet heavy-duty burner controls
- High altitude and gas conversion kits available
- Thermostat sold separately
- Quiet, heavy-duty burner
- Must be vented vertically
- Designed for 24-1/4 in. x 32-3/8 in. floor openings
- 1/2 in. gas connection
- 4 in. vent pipe diameter
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.
- 58% AFUE with 70% thermal efficiency heats approximately 700 sq. ft.
- No electricity required, great for backup heat during a power outage
- Fitted with an automatic floor register grille temperature control
- Resettable vent-limit safety switch and matchless pilot igniter
- Long-life and quiet heavy-duty burner controls
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
- Designed for 24-1/4 in. x 42-3/8 in. floor openings
- 1/2 in. gas connection
- 4 in. vent pipe Dia
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 68% AFUE heats approximately 700 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and glass front for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
Williams is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% heats approximately 900 sq. ft.
- Intermittent pilot ignition helps ensure a fast start
- Heats up to 3-rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
- Recommended for professional purchase only
- Product must be installed by licensed contractor
- Product must be installed by licensed contractor
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
- Product must be installed by licensed contractor
Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, 4-season porch, basement, office or shop.
- High-efficient 70% AFUE heats approximately 575 sq. ft.
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- No electricity required - continues working during power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
- 1 in. side clearance
- Higher gauge steel for quiet operation
- High altitude and gas conversion kits available
- Optional blowers improve air circulation
- Optional rear outlet registers deliver additional heat to the room behind the heater
- Thermostat sold separately
Williams' Monterey wall heaters is affordable and energy efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.
- 2-sided heating warms 2 adjacent rooms with 25,000 BTU/hour on each side to heat approximately 1,150 sq. ft.
- High-efficient 70% AFUE with 74% thermal efficiency
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- No electricity required continues working during power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
- 1 in. side clearance
- Higher gauge steel for quiet operation
- Optional blowers improve air circulation
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% AFUE heats approximately 850 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Heats up to three rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% AFUE heats approximately 700 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Factory-installed blower provides faster heat circulation
- Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% AFUE heats approximately 700 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% heats approximately 700 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and glass front for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Factory installed ceramic fiber logs for enhanced fireplace look and added room appeal
- Contemporary black, powder-coat, Scratch-resistant finish to compliment any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Williams' Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% AFUE heats approximately 1400 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Heats up to 3 rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- May be converted to use natural gas with the purchase of gas conversion kit number 7727
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
- Recommended for professional purchase only
- Product must be installed by licensed contractor
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 68% heats approximately 600 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Recommended for professional purchase only
- Dimensions: 25 in. W x 15-3/8 in. D x 28-7/8 in. H
- Optional blower kit (model 2102) sold separately
- Product must be installed by licensed contractor
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% heats approximately 600 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Factory installed ceramic fiber logs for enhanced fireplace look and added room appeal
- Contemporary black, powder-coat, scratch-resistant finish to compliment any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you are in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 67% AFUE heats approximately 550 sq. ft.
- Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
- No electricity required - continues working during power outage
- Matchless pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
- Great for use in garages
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.
- High-efficient 68% AFUE heats approximately 600 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional floorboard available
- High altitude and gas conversion kits available
- Thermostat sold separately
- May be converted to natural gas with the purchase of gas conversion kit number 8950
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 71% heats approximately 575 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Recommended for professional purchase only
- Recommended for professional purchase only
Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 70% AFUE heats approximately 800 sq. ft.
- No electricity required; great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor.
- High altitude and gas conversion kits available
- Thermostat sold separately
Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.
- High-efficient 68% heats approximately 700 sq. ft.
- No electricity required, great for backup heat during a power outage
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Louvered-top design and front grille for improved heat circulation
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Contemporary black, powder-coat, scratch-resistant finish to complement any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Recommended for professional purchase only
- Dimensions: 25 in. W x 15-3/8 in. D x 28-7/8 in. H
- Optional blower kit (model 2102) sold separately
- Product must be installed by licensed contractor
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low-cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.
- High-efficient 65% heats approximately 400 sq. ft.
- Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
- Sealed combustion makes this a great heater for garage or workshop heating requires no inside room air
- No electricity required continues working during power outage
- Matchless pilot igniter
- All vent material included
- Automatic temperature and safety controls
- Optional blower improves air circulation
- Vent cap includes built-in bird guard keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
- Product must be installed by licensed contractor
- Comes with orifice kit for operation between 0 ft. and 8000 ft.
Williams Forsaire Direct Vent Wall Heater has a counterflow blower system which uses outside air and circulates the warm air from the ceiling to the floor. This helps equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.
- High-efficient 76% heats approximately 1,300 sq. ft.
- Standing pilot ignition helps ensure a fast start time
- Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
- Soft white, heat resistant contemporary finish complements any decor
- Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Optional vent shield deflector - insulated, galvanized steel for exterior surface protection
- Vent cap includes built-in bird guard - keeps birds and rodents from entering
- High altitude and gas conversion kits available
- Thermostat sold separately
Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.
- 58% AFUE with 70% thermal efficiency heats approximately 850 sq. ft.
- No electricity required; great for backup heat during a power outage
- Fitted with an automatic floor register grille temperature control
- Resettable vent-limit safety switch and matchless pilot igniter
- Long-life and quiet heavy-duty burner controls
- High altitude and gas conversion kits available
- Thermostat sold separately
- Must be vented vertically
- Designed for 24-1/4 in. W x 42-3/8 in. L floor opening
- 1/2 in. gas connection
- 4 in. vent pipe diameter
Williams is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.
- High-efficient 76% heats approximately 900 sq. ft.
- Intermittent pilot ignition helps ensure a fast start
- Heats up to 3-rooms with optional outlet accessories
- Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
- Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
- Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
- Soft white, heat resistant contemporary finish complements any decor
- High altitude and gas conversion kits available
- Thermostat sold separately
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty
- Recommended for professional purchase only
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Recommended for professional purchase only