Searched for "40101800"
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Heat Strip
- 5kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This high altitude conversion kit contains the necessary orifices for converting Williams heaters to function at elevations up to 1000 ft. A standard wall heater is rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Vent limit switch for Williams furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. Board-mounted design with switch mounted on the extension straps.
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Determines when the air is warm enough to circulate
- Shuts off the burner when the air in the system exceeds a maximum temperature
- Original factory part
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit Williams Direct-Vent Furnaces 14,000 BTU. The blower accessory features a fully automatic fan switch.
- 115-Volt power supply required
- 125 CFM
- Fits direct-vent furnace 14,000 BTU models
- Blower is easy to install
MFG Part# HTR15172
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 3000w
- 277v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Williams Vent Limit Switch for Williams Furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. This is an important safety device for your wall heater.
- Vent limit switch, which is also referred to as a fan limit switch and is typically shaped like a small metal disc, prevents damage to your furnace by shutting the furnace down in the event that it overheats, this prevents the heat exchanger from warping and cracking from temperatures that are too high
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Board-mounted design with switch mounted on the extension straps
- Original factory part
Williams blower accessory for Monterey top vent furnaces improves the circulation of warm air and reduces temperature differences in the room. It features a grille that is painted soft white to match the furnace casing. This blower is an accessory add-on, this is not a standard feature of the furnace.
- Improves the circulation of warm air and reduces temperature differences in the room
- Designed for use with Monterey top-vent furnace models: 2509621, 2509622, 3509621, 3509622, 5009621 and 5009622
- Grille painted soft white to match the furnace casing
- Attaches to top of Monterey furnaces with on/off switch or automatic operation
- 115-Volt
Use Williams Vent Extension to meet your installation needs. This vent extension is designed to accommodate venting through a wall up to 15 in. thick. Vent tubes only, does not include outside cap.
- Galvanized metal
- Includes flue extension tube, air inlet tube and air inlet shield
- For Williams direct-vent gravity models 2203621, 2203622, 3003621 and 3003622
- For wall thicknesses from 9 in. to 15 in.
Heater Element
- 9.6kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Complete Heater Unit
- 480v
- 10kw
- 3 Phase
Heater Element
- 15kw
- 1 Phase
- For BCS2 30/36/37/42/48/60 air handler
The high-altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
480v
- 480V, 90W
- 29-36" DIAMETER
- 64" LEADS
The category 3-horizontal 4 in vent kit provides class 3-single wall ducting for use with Mr. Heater Big Maxx unit heaters, ranging from 50,000, 80,000, and 125,000 BTUs. Complies with US standard (UL1738) and Canadian standard (S636). Designed for horizontal installation only. Kit includes 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone. Stainless steel is required for horizontal installations per new category 3-certifications. Other parts may also be required for your specific installation needs. Please check and adhere to all state and local codes before installation.
- Category 1 horizontal 4 in. vent kit for use with Mr. Heater big maxx or heatstar by enerco brand unit heaters ranging from 50,000, 80,000, and 125,000 BTUs
- Stainless steel 4 in. sealed ducting meets new category 3-certifications
- Includes: 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone
- Complies with US standard (UL1738) and Canadian standard (S636)
- Kit provides the pieces needed for an average installation - additional pieces may be needed
Williams Thin-Wall Collar Kit for use when wall thicknesses is between and 5 in. Designed to fit with all Williams Direct-Vent models. Used to increase thickness with wood strips are undesirable.
- Installs with vent kit on direct-vent models 1403622, 1403621, 2203622, 2203621, 3003622 and 3003621
- Constructed of durable metal
- To be used with Williams furnace vent cap assemblies only
- Original factory part