Searched for "40101800"
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
The high-altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Vent limit switch for Williams furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. Board-mounted design with switch mounted on the extension straps.
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Determines when the air is warm enough to circulate
- Shuts off the burner when the air in the system exceeds a maximum temperature
- Original factory part
The high-altitude kit for the Williams 3003822 direct vent wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
Wall or cabinet mounted millivolt thermostat. For use with Williams wall furnaces. Allows you to set optimal comfort for the rooms heated by a Williams wall furnace.
- Standard millivolt thermostat
- Can be cabinet or wall mounted
- No electricity required
- Easy slide for temperature set
The high-altitude kit for the Williams 3501521A room heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Room heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
The high altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Freshen the appearance of your Energy Plus heater with this convenient replacement grille kit in white. Perfect for quickly updating an old, discolored heater grille, this handy kit includes matching screws. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Energy Plus (CE) electric heaters
- Use with Energy Plus electric heaters with built-in digital thermostat
- Kit includes painted screws in white
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white
- 1-year limited warranty
Heater Element
- 4.8kw
- 240v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Install kit for the Heatstar HST45.Heatstar low-intensity infrared heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For use with the HST45N or HST45LP and the HST 10 in. tube set.
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kit
- 24-Volt thermostat with 50-90 degree range
- Chain kit includes 2 ft. - 3 ft. chains and 4 hooks
Heater Element
- 10kw
- 1 Phase
- For BCS2 18/24/30/36/37/42/48/60 air handler
Heater Element
- 230 Volt / 60 Hz. / 1 Ph
- 5kw
- 30 amps
Free Standing Accessory kit allows single-sided furnaces to be surface mounted instead of recessed. Ideal for remodeling in existing masonry wall construction or when wall studs are substandard. Comes in soft-white finish, 102 in. is maximum height.
- Use with Monterey top-vent models
- Heavy-gauge metal
- Matches the texture and color of the furnace to provide a completed finish
- Includes side rails and vent cover
Heater Element
- 10kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 150,000 BTU or 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Add this side register to your Forsaire top vent and direct vent heaters to add heat to a second room. This register mounts on the side wall of a second room and must be within 10 in. of the furnace. Boots, grille, and trim material to duct up to 25% heat into side room.
- Kit includes boots, grille, damper and trim
- Designed for Forsaire top-vent and direct-vent models
- Register comes in soft-white finish
- Easy to install
Williams Thin-Wall Collar Kit for use when wall thicknesses is between and 5 in. Designed to fit with all Williams Direct-Vent models. Used to increase thickness with wood strips are undesirable.
- Installs with vent kit on direct-vent models 1403622, 1403621, 2203622, 2203621, 3003622 and 3003621
- Constructed of durable metal
- To be used with Williams furnace vent cap assemblies only
- Original factory part
This high altitude conversion kit contains the necessary orifices for converting Williams heaters to function at elevations up to 1000 ft. A standard wall heater is rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
MFG Part# 903905
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Complete Heater Unit
- 480v
- 5kw
- 6a
Installation Kit for 20 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 60,000 BTU or 80,000 BTU burner boxes with 20 ft. tube sets
- Kit includes: thermostat, shut-off valve, stainless steel flex gas connector, vent cap, and chain kit
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Heater Element
- 240v
- 10.4kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Use Williams Vent Extension to meet your installation needs. This vent extension is designed to accommodate venting through a wall up to 15 in. thick. Vent tubes only. Does not include outside cap.
- Includes flue extension tube, air inlet tube and air inlet shield
- Galvanized metal
- Designed to fit Williams 1403622, 1403621, 1403822 and 1403821 direct-vent furnaces
- For up to 15 in. wall thickness
MFG Part# BT1420034
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
3-easy functions: On/Off - Thermostat Setting in digital. Operates with Williams Monterey, Direct-Vent Gravity and Hearth Console models. Black in color with velvet-touch casing.
- Easy-to-read LCD screen
- Displays room temperature in Fahrenheit or Celsius
- Battery operated
- 4-button control
Header works with the Monterey 25K and 35K BTU wall furnace. Will also work with the Monterey Plus version. Replace the header without having to replace the entire furnace.
- Replace the part instead of the furnace
- Durable metal
- Comes fully assembled
- Easy to install
Williams blower accessory for Monterey top vent furnaces improves the circulation of warm air and reduces temperature differences in the room. It features a grille that is painted soft white to match the furnace casing. This blower is an accessory add-on, this is not a standard feature of the furnace.
- Improves the circulation of warm air and reduces temperature differences in the room
- Designed for use with Monterey top-vent furnace models: 2509621, 2509622, 3509621, 3509622, 5009621 and 5009622
- Grille painted soft white to match the furnace casing
- Attaches to top of Monterey furnaces with on/off switch or automatic operation
- 115-Volt
Williams Terminal Block Thermocouple is designed to provide high output for impressive performance, making it great for use with your wall furnace. For your convenience, the terminal block thermocouple includes a vent limit switch and a built-in junction box and it can fit many types of Williams furnaces. Perfect for use with your wall furnace.
- Equipped with a built-in junction box to which wires from the vent limit switch are connected
- Vent limit switch sold separately
- 24 in. L
- Fits Williams model numbers 3508731, 3508732, 4007731, 4007732, 5008731, 5008732, 6257731, 6257732, 6508731, and 6508732
480v
- 22" Leads
- 7" Diameter
- 70w
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
This 90 degree elbow tube adapter allows the Heatstar ERXL or ER2STG tube systems to curve left or right. Great for ceilings with limited dimensions or redirecting to another area. Includes coupler and key for install.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 90 degree elbow tube, coupler, and key
- Tube is aluminized steel
- Coupler and key are stainless steel
Installation Kit for 40 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 100,000 BTU or 125,000 BTU burner boxes with 40 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Ideal for larger rooms where faster heat is desired. Designed to fit a variety of Hearth heaters.
- Fits model size 3501522, 5001522, 6501522, 3502522, 5002522 and 6502522
- Includes an automatic and manual fan switch along with a power supply cord
- 120-Volt
- 150 CFM
- Not for use on the 20,000 BTU/hour heaters
Decorative Grid Kit for use with the HS45GSP series tube heaters. Easy to install on either the Natural gas or Propane GSP units. Comes with everything you need to take the unit from commercial to domestic.
- Easy installation
- Creates a pleasing non-industrial appearance
- Steel construction
- Lightweight
Williams furnace conversion kit for Williams natural gas room heaters 5001522A and 5002522A. Includes the components required to change the furnace from natural gas to propane. It contains a regulator and the necessary parts for a proper conversion.
- Contains the necessary components needed to convert a furnace from natural gas to propane
- Designed for the Williams room heater - natural gas to propane gas for 50015A/50019A/50025A/50029A series
- Includes easy to follow instructions
- Contains conversion certificate and labels
Use Williams Vent Extension to meet your installation needs. This vent extension is designed to accommodate venting through a wall up to 15 in. thick. Vent tubes only, does not include outside cap.
- Galvanized metal
- Includes flue extension tube, air inlet tube and air inlet shield
- For Williams direct-vent gravity models 2203621, 2203622, 3003621 and 3003622
- For wall thicknesses from 9 in. to 15 in.
MFG Part# BT1420031
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# B1037485S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This 12 in. tube extension is compatible with Williams Direct Vent Furnaces. To meet your installation needs, all models accommodate optional through the-wall vent which may extend up to a 24 in. maximum. Heavy duty metal for long life.
- Galvanized metal
- Allows for differences in heights
- For direct vent heater installations
- Replacement or new installation
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Heater Element
- 480v
- 4.5kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
480v
- 70w
- 16" Leads
- 27.1" Dia