Searched for "40101800"
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Heater Element
- 277v
- 2.0kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
480v
- 62" Leads
- 70w
- 6.63" Diameter
Heater Element
- 14.25kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Mr. Heater Overhead Low Intensity Radiant Tube Heater 180° U-Tube Adapter Kit is a comprehensive solution designed to enhance the versatility and functionality of Mr. Heaters's low-intensity radiant tube heaters. This kit includes a 180° 4 in. return component, couplers and detailed installation instructions, making it an indispensable accessory for HVAC professionals and facility managers seeking to optimize their heating systems.
- 180° 4 in. return
- 180° u-tube kit is to increase the amount of btu's in a space where a straight run is not needed or possible
- Includes couplers that are precision-machined to guarantee a secure and leak-free connection
- Comprehensive and easy-to-follow installation instructions
MFG Part# 903905
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Replacement reflector hangers for the Heatstar ERXL and ER2STG tube systems. Chrome plated. 1 per 10 ft. of reflector.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 1 pair of hangers
- 1 pair per 10 ft. of reflector
- Chrome plated
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 150,000 BTU or 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
This 12 in. tube extension is compatible with Williams Direct Vent Furnaces. To meet your installation needs, all models accommodate optional through the-wall vent which may extend up to a 24 in. maximum. Heavy duty metal for long life.
- Galvanized metal
- Allows for differences in heights
- For direct vent heater installations
- Replacement or new installation
MFG Part# HT32TC705
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 0275P00065S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 8604-091BX
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 491225R
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# B1037485S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit a variety of Williams furnaces. This blower accessory features an automatic power switch as well as a power cord for added convenience and ease of use.
- Helps improve warm air circulation and reduces temperature differences in the room for comfort
- Mounts easily inside the furnace casing
- Fits Williams model numbers 2203621, 2203622, 3003621 and 3003622
- Includes an automatic fan switch and a power supply cord (115-Volt power supply required) for your convenience
- Moves air at up to 135 CFM for effective use
The category 3-horizontal 4 in vent kit provides class 3-single wall ducting for use with Mr. Heater Big Maxx unit heaters, ranging from 50,000, 80,000, and 125,000 BTUs. Complies with US standard (UL1738) and Canadian standard (S636). Designed for horizontal installation only. Kit includes 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone. Stainless steel is required for horizontal installations per new category 3-certifications. Other parts may also be required for your specific installation needs. Please check and adhere to all state and local codes before installation.
- Category 1 horizontal 4 in. vent kit for use with Mr. Heater big maxx or heatstar by enerco brand unit heaters ranging from 50,000, 80,000, and 125,000 BTUs
- Stainless steel 4 in. sealed ducting meets new category 3-certifications
- Includes: 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone
- Complies with US standard (UL1738) and Canadian standard (S636)
- Kit provides the pieces needed for an average installation - additional pieces may be needed
MFG Part# 902818
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Use Williams Vent Extension to meet your installation needs. This vent extension is designed to accommodate venting through a wall up to 15 in. thick. Vent tubes only, does not include outside cap.
- Galvanized metal
- Includes flue extension tube, air inlet tube and air inlet shield
- For Williams direct-vent gravity models 2203621, 2203622, 3003621 and 3003622
- For wall thicknesses from 9 in. to 15 in.
Williams furnace conversion kit for Williams natural gas room heaters 5001522A and 5002522A. Includes the components required to change the furnace from natural gas to propane. It contains a regulator and the necessary parts for a proper conversion.
- Contains the necessary components needed to convert a furnace from natural gas to propane
- Designed for the Williams room heater - natural gas to propane gas for 50015A/50019A/50025A/50029A series
- Includes easy to follow instructions
- Contains conversion certificate and labels
3-easy functions: On/Off - Thermostat Setting in digital. Operates with Williams Monterey, Direct-Vent Gravity and Hearth Console models. Black in color with velvet-touch casing.
- Easy-to-read LCD screen
- Displays room temperature in Fahrenheit or Celsius
- Battery operated
- 4-button control
480v
- 90W, 480V
- 28.7-35.7 CIRCUMFERENCE
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 10kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 10kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 9.6kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
MFG Part# 148366P9S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 15kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 230 Volt / 60 Hz. / 1 Ph
- 5kw
- 30 amps
Use Williams' 24 in. Vent Extension to meet your installation needs, this vent extension is designed to accommodate venting through a wall 15 in. to 24 in. thick. Vent tubes only. Does not include outside cap.
- Includes flue extension tube, air inlet tube and air inlet shield
- Galvanized metal
- Designed to fit the Williams 1403621, 1403622, 3003621 and 3003622 direct-vent furnaces
- For up to 24 in. wall thickness
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
MFG Part# 06DA660076
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams Monterey rear outlet furnace register allows heat to be diverted into an adjacent room. A chain-operated damper and register fit flush on a wall on the back side of your furnace. The damper adjusts the amount of heat delivered through the register.
- Discharges approximately 10% of the heat into an adjacent room
- Great for bedrooms and bathrooms
- Heavy-gauge metal painted in a soft-white finish
- Damper and register fit flush on a wall on the back side of the furnace
- Chain-operated damper adjusts the amount of heat delivered through register
- Turns your single outlet model into a dual
480v
- 22" Leads
- 7" Diameter
- 70w
Wall or cabinet mounted millivolt thermostat. For use with Williams wall furnaces. Allows you to set optimal comfort for the rooms heated by a Williams wall furnace.
- Standard millivolt thermostat
- Can be cabinet or wall mounted
- No electricity required
- Easy slide for temperature set
Low voltage, 24-Volt, thermostat to adjust and maintain the temperature for a variety of heaters. Has a Fahrenheit and Celsius range. Slide control with off position.
- For use with high intensity infrared overhead heaters, low intensity radiant tube heaters, and forced air unit heaters
- 50-90 degree temperature range
- Also has Celsius scale
- Limited 1 year warranty
MFG Part# 902824
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
480v
- 150w
- 12-13" Dia
- 22" Leads
1-Way Diffusing Grille for Forsaire Furnaces. The 1-Way Grille Kit is used to direct airflow from the bottom grille. When warm air discharges from the front, a diffusing grille can be used to divert heat to either the right or left. The blades are positioned to achieve the most effective airflow for your application.
- Fits all forsaire furnace models
- Soft-white enamel finish
- Louvers are positioned in 1 direction at 20 left or right
- Snap-on for easy installation
480v
- 70w
- 16" Leads
- 21.8-29" Dia
MFG Part# 903903
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
480v
- 8" Diameter
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 265V
- 20A
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# BT1420034
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The high altitude kit for the Williams 6007731 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included