Searched for "40101800"
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
480v
- 8" Diameter
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# B1037485S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Complete Heater Unit
- 240v
- 4000/2000w
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Wall or cabinet mounted millivolt thermostat. For use with Williams wall furnaces. Allows you to set optimal comfort for the rooms heated by a Williams wall furnace.
- Standard millivolt thermostat
- Can be cabinet or wall mounted
- No electricity required
- Easy slide for temperature set
Heater Element
- 265V
- 20A
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Installation Kit for 20 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 60,000 BTU or 80,000 BTU burner boxes with 20 ft. tube sets
- Kit includes: thermostat, shut-off valve, stainless steel flex gas connector, vent cap, and chain kit
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Installation Kit for 40 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 100,000 BTU or 125,000 BTU burner boxes with 40 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Williams Monterey rear outlet furnace register allows heat to be diverted into an adjacent room. A chain-operated damper and register fit flush on a wall on the back side of your furnace. The damper adjusts the amount of heat delivered through the register.
- Discharges approximately 10% of the heat into an adjacent room
- Great for bedrooms and bathrooms
- Heavy-gauge metal painted in a soft-white finish
- Damper and register fit flush on a wall on the back side of the furnace
- Chain-operated damper adjusts the amount of heat delivered through register
- Turns your single outlet model into a dual
Heater Element
- 15kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 903905
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# HTR15172
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Add this side register to your Forsaire top vent and direct vent heaters to add heat to a second room. This register mounts on the side wall of a second room and must be within 10 in. of the furnace. Boots, grille, and trim material to duct up to 25% heat into side room.
- Kit includes boots, grille, damper and trim
- Designed for Forsaire top-vent and direct-vent models
- Register comes in soft-white finish
- Easy to install
Heater Element
- 3000w
- 277v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams 24 in. Vent Enclosure fits all Forsaire Top-Vent Counter flow furnaces. The vent enclosure kit is used when the furnace is surface mounted. It encloses the vent pipe from the top of the surface to the ceiling.
- Soft white finish to match furnace
- Durable metal construction
- Fits Forsaire top-vent counter flow furnace models: 6008532, 6008531, 3508732, 3508731, 5008732, 5008731, 6508732, 6508731, 3508332, 3508331, 5508332 and 5508331
- Designed to enclose exposed vent pipes from the top of the furnace to the ceiling
- 12 in. or 36 in. models available to accommodate various ceiling heights
Heater Element
- 120V
- 90W
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 148366P9S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 230 Volt / 60 Hz. / 1 Ph
- 5kw
- 30 amps