Searched for "40101800"
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Heat Strip
- 5kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This high altitude conversion kit contains the necessary orifices for converting Williams heaters to function at elevations up to 1000 ft. A standard wall heater is rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Vent limit switch for Williams furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. Board-mounted design with switch mounted on the extension straps.
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Determines when the air is warm enough to circulate
- Shuts off the burner when the air in the system exceeds a maximum temperature
- Original factory part
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit Williams Direct-Vent Furnaces 14,000 BTU. The blower accessory features a fully automatic fan switch.
- 115-Volt power supply required
- 125 CFM
- Fits direct-vent furnace 14,000 BTU models
- Blower is easy to install
MFG Part# HTR15172
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 3000w
- 277v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Williams Vent Limit Switch for Williams Furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. This is an important safety device for your wall heater.
- Vent limit switch, which is also referred to as a fan limit switch and is typically shaped like a small metal disc, prevents damage to your furnace by shutting the furnace down in the event that it overheats, this prevents the heat exchanger from warping and cracking from temperatures that are too high
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Board-mounted design with switch mounted on the extension straps
- Original factory part
Williams blower accessory for Monterey top vent furnaces improves the circulation of warm air and reduces temperature differences in the room. It features a grille that is painted soft white to match the furnace casing. This blower is an accessory add-on, this is not a standard feature of the furnace.
- Improves the circulation of warm air and reduces temperature differences in the room
- Designed for use with Monterey top-vent furnace models: 2509621, 2509622, 3509621, 3509622, 5009621 and 5009622
- Grille painted soft white to match the furnace casing
- Attaches to top of Monterey furnaces with on/off switch or automatic operation
- 115-Volt
Use Williams Vent Extension to meet your installation needs. This vent extension is designed to accommodate venting through a wall up to 15 in. thick. Vent tubes only, does not include outside cap.
- Galvanized metal
- Includes flue extension tube, air inlet tube and air inlet shield
- For Williams direct-vent gravity models 2203621, 2203622, 3003621 and 3003622
- For wall thicknesses from 9 in. to 15 in.
Heater Element
- 9.6kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Complete Heater Unit
- 480v
- 10kw
- 3 Phase
Heater Element
- 15kw
- 1 Phase
- For BCS2 30/36/37/42/48/60 air handler
The high-altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
480v
- 480V, 90W
- 29-36" DIAMETER
- 64" LEADS
The category 3-horizontal 4 in vent kit provides class 3-single wall ducting for use with Mr. Heater Big Maxx unit heaters, ranging from 50,000, 80,000, and 125,000 BTUs. Complies with US standard (UL1738) and Canadian standard (S636). Designed for horizontal installation only. Kit includes 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone. Stainless steel is required for horizontal installations per new category 3-certifications. Other parts may also be required for your specific installation needs. Please check and adhere to all state and local codes before installation.
- Category 1 horizontal 4 in. vent kit for use with Mr. Heater big maxx or heatstar by enerco brand unit heaters ranging from 50,000, 80,000, and 125,000 BTUs
- Stainless steel 4 in. sealed ducting meets new category 3-certifications
- Includes: 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone
- Complies with US standard (UL1738) and Canadian standard (S636)
- Kit provides the pieces needed for an average installation - additional pieces may be needed
Williams Thin-Wall Collar Kit for use when wall thicknesses is between and 5 in. Designed to fit with all Williams Direct-Vent models. Used to increase thickness with wood strips are undesirable.
- Installs with vent kit on direct-vent models 1403622, 1403621, 2203622, 2203621, 3003622 and 3003621
- Constructed of durable metal
- To be used with Williams furnace vent cap assemblies only
- Original factory part
Heater Element
- 230 Volt / 60 Hz. / 1 Ph
- 5kw
- 30 amps
Complete Heater Unit
- 480v
- 5kw
- 6a
Replacement reflector hangers for the Heatstar ERXL and ER2STG tube systems. Chrome plated. 1 per 10 ft. of reflector.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 1 pair of hangers
- 1 pair per 10 ft. of reflector
- Chrome plated
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 150,000 BTU or 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
MFG Part# 8604-091BX
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Freshen the appearance of your Energy Plus heater with this convenient replacement grille kit in white. Perfect for quickly updating an old, discolored heater grille, this handy kit includes matching screws. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Energy Plus (CE) electric heaters
- Use with Energy Plus electric heaters with built-in digital thermostat
- Kit includes painted screws in white
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white
- 1-year limited warranty
480v
- 70w
- 16" Leads
- 21.8-29" Dia
Low voltage, 24-Volt, thermostat to adjust and maintain the temperature for a variety of heaters. Has a Fahrenheit and Celsius range. Slide control with off position.
- For use with high intensity infrared overhead heaters, low intensity radiant tube heaters, and forced air unit heaters
- 50-90 degree temperature range
- Also has Celsius scale
- Limited 1 year warranty
Installation Kit for 50 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 125,000 BTU, 150,000 BTU, or 175,000 BTU burner boxes with 50 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Williams dual header is designed to fit Monterey Dual-Wall Top-Vent furnace. This is a hardware assembly for the Monterey 50K BTU wall furnace. Also works with the Monterey Plus.
- Replace the part instead of the furnace
- Durable metal
- Comes fully assembled
- Easy to install
This 90 degree elbow tube adapter allows the Heatstar ERXL or ER2STG tube systems to curve left or right. Great for ceilings with limited dimensions or redirecting to another area. Includes coupler and key for install.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 90 degree elbow tube, coupler, and key
- Tube is aluminized steel
- Coupler and key are stainless steel
Heater Element
- 265V
- 20A
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams 24 in. Vent Enclosure fits all Forsaire Top-Vent Counter flow furnaces. The vent enclosure kit is used when the furnace is surface mounted. It encloses the vent pipe from the top of the surface to the ceiling.
- Soft white finish to match furnace
- Durable metal construction
- Fits Forsaire top-vent counter flow furnace models: 6008532, 6008531, 3508732, 3508731, 5008732, 5008731, 6508732, 6508731, 3508332, 3508331, 5508332 and 5508331
- Designed to enclose exposed vent pipes from the top of the furnace to the ceiling
- 12 in. or 36 in. models available to accommodate various ceiling heights
Heater Element
- 2.5kW
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Heater Element
- 20kw
- 1 Phase
- For BCS2 48/60 air handler
Williams Terminal Block Thermocouple is designed to provide high output for impressive performance, making it great for use with your wall furnace. For your convenience, the terminal block thermocouple includes a vent limit switch and a built-in junction box and it can fit many types of Williams furnaces. Perfect for use with your wall furnace.
- Equipped with a built-in junction box to which wires from the vent limit switch are connected
- Vent limit switch sold separately
- 24 in. L
- Fits Williams model numbers 3508731, 3508732, 4007731, 4007732, 5008731, 5008732, 6257731, 6257732, 6508731, and 6508732
MFG Part# 902818
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Hanging chain kit for the Heatstar ERXL and ER2STG tube systems. 1 kit per 10 ft. of reflector. These are also included in the full ERXL and ER2STG install kits.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 2 3 ft. chains and 4 S-hooks
- Tube is aluminized steel
- See instructions for clearances
MFG Part# B1037485S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 480v
- 4.5kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit a variety of Williams furnaces. This blower accessory features an automatic power switch as well as a power cord for added convenience and ease of use.
- Helps improve warm air circulation and reduces temperature differences in the room for comfort
- Mounts easily inside the furnace casing
- Fits Williams model numbers 2203621, 2203622, 3003621 and 3003622
- Includes an automatic fan switch and a power supply cord (115-Volt power supply required) for your convenience
- Moves air at up to 135 CFM for effective use
LP gas conversion kit for Williams furnace model 3509622. Convert your Williams' natural gas furnace, model number 3509622, into a propane gas version. Kit contains all items necessary for conversion from natural gas to propane gas.
- Natural to propane gas (LPG) conversion
- Includes all components to correctly change gas types
- Easy to follow instructions
- Conversion certificate and labels included
Heater Element
- 10kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)