Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

This Radiant 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shut off for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 750 sq. ft.

This Radiant 10,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 250 sq. ft.

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 72-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,500-Watt heater effectively warms up to 175 sq. ft. (small to medium-sized rooms)
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

This Blue Flame 20,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 500 sq. ft.

This Blue Flame 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 750 sq. ft.

The 1250-Watt Surface-Mount Fan-Forced Ceiling Heater from Broan features an enclosed, sheathed element and a built-in fan to help evenly disperse heat. Ideal for a mudroom, bathroom, den, office or other cold areas of the house, this ceiling fan offers a lubricated motor for years of maintenance-free operation. The low-profile design mounts to a standard 3-1/2 in. or 4 in. round electrical box or a 4 in. octagon ceiling box.

• Enclosed, sheathed element produces 1250-Watt of heat at 120-Volt power to disperse warmth evenly
• Automatic overheat protection helps prevent damage
• Durable aluminum construction offers lasting performance
• Built-in fan helps distribute heat uniformly
• Low-profile design mounts easily to a standard 3-1/2 in. or 4 in. round electrical box or 4 in. octagon ceiling box
• Satin aluminum finish complements any interior decor
• Meets UL listing safety standards
• Suitable for indoor use only
• Measures 11 in. Dia x 2.8 in. H
• For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am - 7:00 pm EST.

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in low position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Single pole (2-wire) low setting
• For use with cadet electric baseboards only
• 22 Amp

This Blue Flame 10,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shut off for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 250 sq. ft.

Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.

• High-efficient 66% AFUE heats approximately 675 sq. ft.
• Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
• No electricity required - continues working during power outage
• "Matchless" pilot igniter
• All vent material included
• Automatic temperature and safety controls
• Optional blower improves air circulation
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 1000-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 150 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. Contemporary design compliments any decor.

• Patented CLIP-N-FIT feature allows installer to change the desired wattage output without moving the jumper wire
• Dual protection: self-hold limit with one-time thermal fuse
• Thermostat with positive off position for added safety on all models
• Efficient quiet operation from smooth running multi-layer impeller

This single pole, single stage non-programmable thermostat control is unit mounted. Range is 45-85 degrees and mounts inside the wiring compartment of the heater. All hardware is included.

• 40-85 degree range
• Non-programmable
• Single pole, single stage
• Compatible with all models except for 5kW, 3 phase models

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cold campsites and frozen lakes call for the warmth of a Big Buddy heater. For your next excursion, the Big Buddy will keep you comfortable with up to 18,000 BTU of heat. Swivel regulators make for easy setup; just screw on two 1-lb propane cylinders or connect to a 20-lb tank using Buddy accessories. The 450 square feet of coverage makes any ice shanty a sauna and any deck a sunroom. With the heaters' registered Life Safety System you won't sweat too much knowing the oxygen depletion sensor, thermal shut-down system, and tip-over switch are keeping you safe. For all of your indoor and outdoor adventures, the Big Buddy is there for you.

• Emits 4,000, 9,000 or 18,000 BTU/hr radiant heat
• Designed and approved for indoor and outdoor use
• Heats up to approximately 400 square feet
• 3 temperature settings: low, medium, and high
• Connects to two 1 lb. cylinders
• Swivel regulators
• Automatic low Oxygen Shut-Off System (ODS)
• Accidental tip-over safety shut-off

Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.

• Two-sided heating warms 2 adjacent rooms with 25,000 BTU/hour on each side to heat approximately 1,150 sq. ft.
• High-efficient 70% AFUE with 74% thermal efficiency
• No electricity required - continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1 in. side clearance
• Higher gauge steel for quiet operation
• Optional blowers improve air circulation
• High altitude and gas conversion kits available
• Thermostat sold separately

For quiet, comfortable heating, This 120-Volt, 60 in. 1250-Watt baseboard heater is perfect. These fan-free heating units deliver warmth and comfort in a low-profile housing that's safe to install on the wall or directly on carpet, tile or other flooring. They are suitable for primary heating or secondary heating solutions.

• Convection heats the room rapidly, without uneven hot and cold zones, providing comfort from floor to ceiling
• Heat your space without kicking up dust or other allergens, the natural convection airflow doesn't rely on a blower or fan to move warm air throughout the room
• Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp
• For worry-free warmth, these UL Listed baseboard heaters offer an overheat protection feature that prevents the unit from running when its air intake is blocked

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Heatstar 125,000 -170,000 BTU Forced Air Propane Heater is built to last with high quality components and heavy-duty design built for the job site. This Thermostatically controlled Heatstar 170,000 BTU Forced Air Propane Heater comes with a standard 20 ft. hose, regulator and all the safety you would expect of a Heatstar product. Equipped with factory installed high limit switch and continuous solid-state ignition, you can feel comfortable using this heater on any job site. Just plug the heater into a 110-Volt outlet, then hook up the included hose and regulator to a 100 lb. propane tank or larger and you are ready to take the chill out of any job. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency or gas supplier.

• Heats up to 4,000 sq. ft.
• Rugged and durable steel construction
• Economical, efficient and clean burning
• Includes a heavy duty high output fan, 20 ft. hose and regulator

Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.

• High-efficient 66% AFUE heats approximately 675 sq. ft.
• Sealed combustion makes this a great heater for garage or workshop heating. Requires no inside room air.
• No electricity required - continues working during power outage
• "Matchless" Pilot igniter
• All vent material included
• Automatic temperature and safety controls
• Optional blower improves air circulation
• Vent cap includes built-in bird guard - Keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately