Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in off position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Double pole (4-wire) positive off
• For use with cadet electric baseboards only
• 22 Amp

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The 1250-Watt Surface-Mount Fan-Forced Ceiling Heater from Broan features an enclosed, sheathed element and a built-in fan to help evenly disperse heat. Ideal for a mudroom, bathroom, den, office or other cold areas of the house, this ceiling fan offers a lubricated motor for years of maintenance-free operation. The low-profile design mounts to a standard 3-1/2 in. or 4 in. round electrical box or a 4 in. octagon ceiling box.

• Enclosed, sheathed element produces 1250-Watt of heat at 120-Volt power to disperse warmth evenly
• Automatic overheat protection helps prevent damage
• Durable aluminum construction offers lasting performance
• Built-in fan helps distribute heat uniformly
• Low-profile design mounts easily to a standard 3-1/2 in. or 4 in. round electrical box or 4 in. octagon ceiling box
• Satin aluminum finish complements any interior decor
• Meets UL listing safety standards
• Suitable for indoor use only
• Measures 11 in. Dia x 2.8 in. H
• For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am - 7:00 pm EST.

This Radiant 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shut off for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 750 sq. ft.

This Blue Flame 20,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 500 sq. ft.

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 72-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,500-Watt heater effectively warms up to 175 sq. ft. (small to medium-sized rooms)
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate. You can install it easily on either end of the baseboard heater and avoid additional wiring.

• Easy to use with large adjusting twist dial
• Eliminates the need for extra wiring
• Conveniently mounts to either end of Cadet baseboard heater
• Use with 120, 208, or 240-Volt cadet standard baseboard heaters
• White color to match your baseboard heater
• When fully turned counterclockwise, thermostat is in low position
• Temperature range: 45 degree F - 80 degree F (7 degree C to 27 degree C)
• Single pole (2-wire) low setting
• For use with cadet electric baseboards only
• 22 Amp

This Radiant 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED FOR SALE IN CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shut off for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 750 sq. ft.

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

This Radiant 10,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 250 sq. ft.

The benchmark in top-vent wall furnace heating, the Monterey features a draft hood design, heat disseminating baffles, and a porcelain coated chamber, adding valuable efficiency longevity and energy savings. Affordable and energy-efficient, this furnace is a traditional home comfort system that delivers both quality performance and low operating costs. Recessed or surface-mounted installation.

• Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop
• High-efficient 66% AFUE with 70% thermal efficiency
• Approximately 800 sq. ft. heating area
• No electricity required - continues working during power outage
• 1 in. side clearance
• Thermostat sold separately
• Higher gauge steel provides decreased acoustic noise

Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.

• High-efficient 70% AFUE heats approximately 575 sq. ft.
• No electricity required - continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1" side clearance
• Higher gauge steel for quiet operation
• High altitude and gas conversion kits available
• Optional blowers improve air circulation
• Optional rear outlet registers deliver additional heat to the room behind the heater
• Thermostat sold separately

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.

• Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
• Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
• Simple 2-wire installation (single-pole)
• Almond knob matches your Com-Pak heater (White color available)
• 22 Amp
• Temperature range is 40°F - 85°F
• Accessory to UL listing of Cadet Com-Pak heaters
• 1-year limited warranty
• Choose the right thermostat for your heater and your home.

This Blue Flame 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 750 sq. ft.

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

This Radiant 18,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED FOR SALE IN CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens, and hoop style greenhouses
• Heats up to 500 sq. ft.

Easy to install and operate, this Cadet baseboard-mount single-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position that turns the heater on in cold rooms automatically.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 2-wire installation (single-pole)
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

For true zonal heating in a compact design that fits in anywhere, choose this wall heater. Its fast-response heating element kicks in quickly, providing warmth for your bedroom, bathroom or hallway. The patented CLIP-N-FIT system, thermal fuse and self-hold limit makes installing it on the wall safe and easy.

• Warm up the room rapidly with this reliable wall heater; its fast-response element delivers warmth instantly
• Get reliable zonal heating without cold spots; the unit's multi-layer impeller delivers consistent airflow in an energy-efficient design
• Compact design fits well in bathrooms, bedrooms and hallways for comfortable living all year round
• Unit features a self-hold limit to protect against overheating, with a 1-time thermal fuse backup

This Radiant 20,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. Multiple burner tiles utilize radiant heat warming your space like the power of the sun. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. Restricted for sale in California.

• Oxygen Depletion Sensor (ODS) shutoff for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 500 sq. ft.

This Blue Flame 10,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. with a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat. RESTRICTED for SALE in CALIFORNIA.

• Oxygen Depletion Sensor (ODS) shut off for safety and 99.9% efficient
• Thermostat controlled
• Unit comes standard with 2 install options: a bracket for permanent wall mounting and a foot kit for securing to the floor
• Outer shell is a sleek, 2-piece design that is easy to maintain
• Great for enclosed porches, workshops, rec rooms, dens and hoop style greenhouses
• Heats up to 250 sq. ft.

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. Contemporary design compliments any decor.

• Patented CLIP-N-FIT feature allows installer to change the desired wattage output without moving the jumper wire
• Dual protection: self-hold limit with one-time thermal fuse
• Thermostat with positive off position for added safety on all models
• Efficient quiet operation from smooth running multi-layer impeller

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty