Ignition Boards & Modules
Designed For Molded Shower Stalls
- The Drain Is Installed On The Shower Unit Before It Is Placed
- Stainless Steel Snap-In Strainer
- Compression Gasket
- Reference #140Nc
- Fits 2" Schedule 40 Plastic Or 2" Cast Iron Pipe
- High-quality stainless steel strainer for enhanced durability
- Compatible with 2 in. Schedule 40 plastic or cast iron pipes
- Can be easily installed on the shower unit for quick setup
- Ideal for use in molded shower stalls
Universal intermittent pilot ignition module replaces multiple field installed intermittent pilot modules supplied by Honeywell, Robertshaw, Johnson and UTEC (HSC). Uses existing intermittent pilot burner. Includes cross reference, instructions and accessories for easy replacement.
- Replaces over 400-white-rogers, robertshaw and honeywell intermittent pilot ignition modules
- Provides ignition sequencing, flame monitoring and safety shutoff for intermittent pilot warm air furnaces and heating appliances
- Provides 100% pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated, ignition trial/delay sequence is repeated until the appliance lights or call for heat is removed
- For use with natural or LP gas
Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120-Volt AC hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
- Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls
- Main burner ignition using a 120-Volt hot surface igniter
- Flame rectification circuit to monitor flame presence
- Monitoring of system pressure switch, high temperature limit and rollout functions
The Robertshaw 780 Series Pilot Controls feature flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. When the thermostat calls for heat, the 780 series control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established.
- Reduces truck stock inventory, saving space and money
- Easy-to-install with complete in-depth installation instructions
- Pilot and main valves draw 1 Amp at 0.5 power factor
- Combined load at 1.5 Amps at 0.4 power factor
- 95% relative humidity noncondensing at 104 degree F
Direct Replacement 2-in-1 Air Handler control for Carrier Single Stage Air Handler with PSC Blowers. Replaces Carrier HK61EA002 and HK61EA006. Direct Replacement Makes Install Quick and Easy.
- Fast drop-in OEM mounting and wiring
- Factory wiring for inline connector or spade terminals
- Dipswitch selectable blower off delay
- Replaces carrier HK61EA002 and HK61EA006
Goodman OEM Control Board
- 2 Stage.
- Genuine OEM Gooman replacement board
- Replaces: PCBBF106S, PCBBF106, PCBBF107, L40-537
- 2-stage
- Ignition control board
York Direct Replacement Integrated Furnace Control Single Stage Hot Surface Ignition. For 120V Ignitors. Replaces York , 265901, 265902, 539617, S1-03100662000, S1-03101250000, S1-03101266000, S1-03101267000, S1-03101267001, S1-03101284000, S1-03101933000,S1-03101972000, S1-03101973000, S1-03109167000, S1-33102956000, S1-33103010000, White-Rodgers 50A56-242, 50A56-243.
- Direct OEM replacement designed for high volume major brand controls
- Diagnostic LED indicators streamline installation and system troubleshooting
- 120-Volt air cleaner output and 120-Volt humidifier output up to 1 Amp maximum
- Factory standard safety timings and adjustable fan delay options
- Replaceable automotive style fuse
The Robertshaw 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.
- Quick and easy installation
- Complete in-depth instructions and troubleshooting information
- Used on natural gas systems only
- Available with one of four different gas valve types to fit a wide range of furnace applications
Goodman Direct Replacement Integrated Furnace Control Single Stage Hot Surface Ignition for 120V Ignitors. Replaces Goodman 0130F00005, 0130F00005S, B1809926, B1809926S, PCBBF110, PCBBF110S, PCBBF112, PCBBF112S, PCBBF123, PCBBF123S, White-Rodgers 50T55-289, 50A55-289. Diagnostic LED indicators streamline installation.
- Direct OEM replacement designed for high volume major brand controls
- Diagnostic LED indicators streamline installation and system troubleshooting
- 120-Volt air cleaner output and 120-Volt humidifier output up to 1 Amp maximum
- Factory standard safety timings and adjustable fan delay options
- Replaceable automotive style fuse
Limit, Reset Manual. Mfg #20162904S
- 150 Open
- 110 Close
- Brown
- Green
Control Board
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
White-Rodgers Integrated Intelligent Valve Retrofit Kit. Cost Competitive Upgrade To Modern Technology For Intelligent Valve Systems. Includes Ip Gas Valve, 120v Nitride Ignitor And Intermittent Pilot Single Stage Furnace Control. Advanced Diagnostics With Standard Furnace Troubleshooting. Fault Recall With Pushbutton. Main Board With Full Cover And Fault Code Label. Selectable Oem Blower Delays Dipswitch. Stock One Kit Instead Of Multiple Parts. Mfg #50I56D-905
- Cost Competitive Upgrade To Modern Technology For Intelligent Valve Systems.
- Includes Ip Gas Valve, 120v Nitride Ignitor And Intermittent Pilot Single Stage Furnace Control.
- Advanced Diagnostics With Standard Furnace Troubleshooting.
- Fault Recall With Pushbutton.
Control Board
- 3 Amp Fuse
- ECM Motor
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 64299-001
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Trane Direct Replacement Integrated Ignition Control. Two Stage Direct Spark Ignition with 45 or 0 Second Cool Fan Off Delay. Used In Commercial Rooftop and Package Units. Also See F50N02-820 Adaptor Board.
- Replaces standard and adaptor board style controls
- For direct spark systems
- Integrated model controls fan functions and provides burner supervision
- 2-stage
MFG Part# 511-330-090
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# RE0100900
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# CE015
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- Includes ground wire
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- Fuse: 3.15A, 250V
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- 2 Stage
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This is a genuine York OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine York OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More York OEM parts available through special orders
MFG Part# BRD0741
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This is a genuine York OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine York OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More York OEM parts available through special orders
Control Board
- PRI: 120V, 50/60HZ
- SEC: 24V, 50/60HZ. 33 VA Ext. Load
- Class 2 Not Wet, Class 3 Wet
MFG Part# 60M10
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
ICP Control Board 1190596. Control Board. Mfg #1190596
- Control Board
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Trane Direct Replacement Non-Integrated Ignition Module Single Stage Hot Surface Ignition for 120-Volt Ignitors Used in Commercial Rooftop and Package Unit. Also Replaces Trane Kit 17852. Applications for Hot Surface Ignition Systems.
- Replaces standard and adaptor board style controls
- For hot surface ignition systems
- Non-integrated model provides burner supervision
- 1-stage
- 120 Vac hot surface ignition
MFG Part# 1021575R
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- 3 Amp Fuse
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- IFC Board
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 64420-002
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Lennox Direct Replacement Proven Pilot Spark Ignition Module for Single Stage Applications. Features LED for System Diagnostics, Order 50D50-843 for Module Only. Replaces Lennox 30W33 Kit.
- Plug in program keys for quick selection of factory timings
- Microprocessor-based ignition control
- Works with single rod or dual rod remote sensor
- Provides ignition, proof of ignition and precise timings
- LED diagnostic indicator
- For use in natural and LP gas applications
Control Board
- 3 Amp Fuse
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This is a genuine York OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine York OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More York OEM parts available through special orders
Control Board
- 24V 50/60HZ
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- 2 Stage
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- Â For B and MX series air handlers
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Genuine Rheem OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine Rheem OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More Rheem OEM parts available through special orders
Control Board
- Nat / LP
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- 24 VAC
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Control Board
- 24VAC, 60HZ, 0.2A
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 80180
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 124361-1
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This is a genuine York OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine York OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More York OEM parts available through special orders
Control Board
- Boiler Control For Atmospheric Venting
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)