Ignitors
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC. some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The White-Rodgers 50A55-843 universal silicon carbide integrated hot surfAce ignition replAcement control kit. This ignition module replAces most Trane, York, ICP, Amana and White-Rodgers models. This module offers easy installation with the mounting plate (included in the box).
- Flash code diagnostics for easy service
- Fused to protect low voltage system transformers
- Includes mounting template
- Adjustable blower delay
- Pre-purge 30-seconds
- Delay heat on 30/45
- Delay heat off 60/90//120/180
- Delay cool on 5
- Delay cool off 45/90
- Input voltage 25 VAC 50/60 Hz
The White-Rodgers Hot Rod premium nitride ignitor upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nitride ignitor is connected in the existing HIS (hot surface ignition) system, ensuring consistent performance and long ignitor life. The 21D64-2 kit includes everything needed for a quick installation.
- Nitride Ignitor with 15.5 in. leads - replaces over 150 OEM, White-Rodgers and competitive HIS ignitors
- For gas-fired forced-air furnaces, water heaters and boilers
- Universal breakaway bracket included for easy installation and eliminating the need for multiple brackets
- What's in the box: Nitride Ignitor with 15.5 in. leads, universal mounting bracket, screw mounting adaptor, 2 ceramic wire nuts, furnace labels, instruction booklet
- 5-year warranty
This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.
- Furnace hot surface ignitor
- Fits GOODMAN furnaces
- Manufactured with quality in mind
- Compatible with GOODMAN furnaces
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 750 millivolt power generator is a replacement for similar screw-in type generators or for use with type E31-12 pilot burners. This generator is for 750 millivolt self-generation control systems. The PG9 adapter is also included in the box.
- 36 in. armored cable leads with split spade terminals
- PG9 adapter and clips included
- Mounting nut, spring clips and PG9 adapter sleeve included
- For use with type E1-12 pilot burner
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 1820 Series Uni-Kits are designed to replace those hard-to-find ITT General PG9 type pilots. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. A special 1/4" tubing adaptor is provided that allows use of original tubing with nut and ball sleeve. (No cutting of original tubing is necessary).
- Many flame pattern types available
- Thermocouple or thermopile options
- Spark electrode available
- Horizontal or vertical gas inlet
- Several mounting bracket types available
- Aerated pilots with non-linting characteristics
The Q3200U Universal Hot Surface Igniter Kit is designed to provide a robust field service replacement igniter, in gas fired appliances with Norton / St. Gobain / CoorsTek 120 Vac, silicon carbide, hot surface igniters. Pack of 6 igniters. Replaces over 110 OEM igniter models.
- Each igniter package includes cross reference instructions, six brackets, and installation accessories
- Robust Silicon nitride igniter construction
- Igniter application templates enable quick bracket selection
- Remote flame sense appliance applications only
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC
This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.
- Furnace hot surface ignitor
- Fits GOODMAN furnaces
- Manufactured with quality in mind
- Compatible with GOODMAN furnaces
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 768A series 80-Volt hot surface nitride ignitors feature teflon coated leads. This ignitor should be used with hot surface ignition for residential furnaces (Silicon Nitride replacement only). This ignitor has a 2-terminal AMP receptacle with 0.084 female sockets.
- Teflon coated leads
- 2 terminal AMP receptacle, 0.084 female sockets
- Replaces Lennox 41K5601, 768A-4 and Rheem 62-24134-02
- 2-terminal amp receptacle with 0.084 in. female socket
Universal hot surface ignition module replaces multiple field installed hot surface ignition. Uses a 120 VAC igniter. Includes cross reference, instructions, and accessories for easy replacement.
- Replaces over 800 White-Rodgers, Robert Shaw and Honeywell hot surface ignition models
- For 120 VAC (up to 5.0 Amp) surface igniter (Norton 201/271 or equivalent)
- S8910U 3000 series has LED status indicator and micro ammeter ports for easy trouble shooting
- For local (single rod) or remote (dual rod) rectification type flame sensing
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
This ignitor flame rod assembly is designed for Smart valve pilots. It can be used with the Q313 thermopile generator. This assembly is designed for 750 mV power pile applications.
- Variety of mounting brackets available
- Variety of tip styles provides desired flame pattern
- Interchangeable, color-coded orifice and inlet fittings available
- Convert between natural and LP gas
Universal Integrated Furnace Control Hot Surface Ignition. Includes 21D64-2 Universal Silicon Nitride Ignitor Upgrade Kit. Replaces over 200 OEM & Competitive Ignition Modules Including Carrier, Goodman, Trane, York and S9200U, Kit Replaces over 300 Models and Includes Wire Harnesses K & L to Replace Carrier Controls: HK42FZ004, HK42FZ007, HK42FZ008, HK42FZ009, HK42FZ011 or HK42FZ016.
- Replaces over 200 OEM and competitive single stage ignition modules to make repair quick and easy
- Comes with long lasting universal ignitor which will prevent future breakdowns
- Can be used in 120-Volt silicon carbide and 80-Volt silicon nitride ignition applications
- Fast install kit includes everything you need for quick and accurate replacement
- LED diagnostics for quick troubleshooting
Universal Integrated Furnace Control Two-Stage Hot Surface Ignition for 3-Speed (ECM Blower Motor Systems). Includes 21D64-2 Universal Silicon Nitride Ignitor Upgrade Kit. Replaces White-Rodgers 50V51-xxx and 50V61-xxx 2-Stage HSI Systems with 80-Volt or 120-Volt Ignitors
- Reduces inventory by providing maximum control replacement coverage
- Includes a universal 120V nitride ignitor to allow replacement of 80V and 120V controls
- Diagnostic LED indicators streamline installation and system troubleshooting
- 120V air cleaner output and 120V humidifier output up to 1 Amp max
- Factory standard safety timings and adjustable fan delay options
- Replaceable automotive style fuse
- Fenwall Ignition Control for use with Magic-Pak HWC182, HWC242 and HWC302 Model Units
This is a genuine Goodman replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with Goodman packaged units.
- Furnace hot surface ignitor
- Fits Goodman furnaces
- Manufactured with quality in mind
- Compatible with Goodman furnaces
The White-Rodgers 50E47-843 universal silicon carbide non-integrated hot surface ignition module replacement kit. This ignition module replaces most White-Rodgers 50E47 and most competitive modules. This module offers easy installation with the double-sided foam black tape (included in the box).
- Program keys for multiple timings
- Flash code diagnostics for easy service
- Direct and indirect flame sense compatible
- Includes double sided foam black tape for easy installation
Piezo Ignitor. Pilots,ignitors,electrodes. Mfg #SP14410
- Pilots,ignitors,electrodes
- Pack of 1
- Product weight 0.080 LBS.
- Length of the product is 2.100 ins.
Hot surface ignitor with 5.313 in. Leads, 200-insulation, electrical connection. AMP 1-480699-0, receptacle with .093 in. male pins.
- Works with 15, 17 or 45 second HSI systems
- Includes ceramic wire nuts for cut and strip connections
- Extensive cross reference information on our website or download the WR mobile app
- Operating Voltage-120 Vac, 60 Hz
Carrier direct replacement 120V hot surface ignitor kit. Includes 789A-751A1 hot surface ignitor, mounting bracket, screws and adapter harness. Replaces silicon carbide ignitors on 33-1/3 in. mid-efficiency furnaces. Replaces carrier 331930-751 kit.
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installtion
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
Hot Surface Silicin Carbide120-Volt Ignitor. 5-1/4 in. Leads, NM Style Mounting Block, Receptacle with 0.093 in. Male Pins. Replaces Robertshaw 41-418, Goodman B1401018S, Norton 271NM and Surface Ignitor DS418KJ.
- Multiple mounting styles
- Works with 15, 17 or 45 second HSI systems
- All models includes ceramic wire nuts for cut and strip connections
- Extensive cross reference information on our website or download the WR Mobile App
- Easy install
This is a genuine York OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine York OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More York OEM parts available through special orders
Hot Surface Ignitor
- 24V
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Carrier Direct Replacement 120V Hot Surface Silicon Nitride Ignitor. Replaces Carrier LH33ZG001, ICP 1176919. Direct Replacement Makes Install Quick and Easy.
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installation
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
- Easy install
Hot Surface Ignitor Ignitor. Hot Surface Ignitors. Mfg #767A-361
- Hot Surface Ignitors
- Pack of 1
- Weight of the product is 0.160 lbs.
- Length of the product is 3.100 in
Electrode/Spark Ignitor. Pilots,ignitors,electrodes. Mfg #76714900
- Pilots,ignitors,electrodes
- Pkg of 1
- Product Height: 2.100
- TAA/BAA Compliant
Flame Sensor Probe Kit. Pilots,ignitors,electrodes. Mfg #011752F
- Flame Sensor Probe Kit.
- Pilots,ignitors,electrodes
- Product Weight:0.110 Lbs.
- Package of 1
Nat/Lp Spark Ignitor Pilot Assembly. Pilots,ignitors,electrodes. Mfg #3H0374540001
- Pilots,ignitors,electrodes
- Pkg of 1
- TAA/BAA Compliant
- Height: 6.050
Ignition Electrode
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Silicon Nitride 80-Volt Hot Surface Ignitor. White Teflon Coated Leads, Steatite Insulator, 2 Terminal AMP Receptacle With 0.084 in. Female Socket. Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only). Replaces Trane 768A-5 (X13130524010).
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installation
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
- Easy install
Universal Pilot Burner Shell Style. Pilots,ignitors,electrodes. Mfg #J999MKA-2
- Pilots,ignitors,electrodes
- Pkg of 1
- Product Height: 6.700
- Product Length: 1.450
Hot Surface Ignitor
- .55"
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 257010
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Hot Surface Igniter 1" With Gasket. Hot Surface Ignitors. Mfg #2400-286
- Hot Surface Ignitors
- Pack of 1
- Product weight 0.570 LBS.
- Non Hazardous
Hot Surface Ignitor 120 Vac Silicon Carbide Natural Or Lp Gas 5 1/4" Lead Length. Hot Surface Ignitors. Mfg #Q4100C9054
- Hot Surface Ignitors
- Pkg of 1
- Product Height: 3.050
- Product Length: 2.100
Ignitor 1501-2001. Pilots,ignitors,electrodes. Mfg #100265150
- Pilots,ignitors,electrodes
- Pkg of 1
- TAA/BAA Compliant
- Height: 5.650
Silicon Carbide Hot Surface Ignitor. Hot Surface Ignitors. Mfg #41K56
- Hot Surface Ignitors
- Pkg of 1
- TAA/BAA Compliant
- Height: 2.000
Pilot Assembly Stdg Pilot Natgas. Pilots,ignitors,electrodes. Mfg #110851
- Pilots,ignitors,electrodes
- Pack of 1
- Weight of the product is 0.390 lbs
- TAA/BAA Compliant
Ignition Electrode
- 1.718" Electrode Length
- Electrodes: Kanthal D or Hoskins 815
- Bracket: CRS with copper flash, 430 SS or type 2 electro-deposited zinc coating
Hot Surface Ignitor. Hot Surface Ignitors. Mfg #767A-374
- Hot Surface Ignitors
- Pack of 1
- Product Weight is 0.490 lbs.
- TAA/BAA Compliant