Ignitors
The Emerson 750 millivolt power generator is a replacement for similar screw-in type generators or for use with type E31-12 pilot burners. This generator is for 750 millivolt self-generation control systems. The PG9 adapter is also included in the box.
- 36 in. armored cable leads with split spade terminals
- PG9 adapter and clips included
- Mounting nut, spring clips and PG9 adapter sleeve included
- For use with type E1-12 pilot burner
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC. some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Emerson Hot Rod premium nitride ignitor upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nitride ignitor is connected in the existing HIS (hot surface ignition) system, ensuring consistent performance and long ignitor life. The 21D64-2 kit includes everything needed for a quick installation.
- Nitride Ignitor with 15.5 in. leads - replaces over 150 OEM, White-Rodgers and competitive HIS ignitors
- For gas-fired forced-air furnaces, water heaters and boilers
- Universal breakaway bracket included for easy installation and eliminating the need for multiple brackets
- What's in the box: Nitride Ignitor with 15.5 in. leads, universal mounting bracket, screw mounting adaptor, 2 ceramic wire nuts, furnace labels, instruction booklet
- 5-year warranty
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.
- Furnace hot surface ignitor
- Fits GOODMAN furnaces
- Manufactured with quality in mind
- Compatible with GOODMAN furnaces
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Emerson 50A55-843 universal silicon carbide integrated hot surfAce ignition replAcement control kit. This ignition module replAces most Trane, York, ICP, Amana and White-Rodgers models. This module offers easy installation with the mounting plate (included in the box).
- Flash code diagnostics for easy service
- Fused to protect low voltage system transformers
- Includes mounting template
- Adjustable blower delay
- Pre-purge 30-seconds
- Delay heat on 30/45
- Delay heat off 60/90//120/180
- Delay cool on 5
- Delay cool off 45/90
- Input voltage 25 VAC 50/60 Hz
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 1820 Series Uni-Kits are designed to replace those hard-to-find ITT General PG9 type pilots. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. A special 1/4" tubing adaptor is provided that allows use of original tubing with nut and ball sleeve. (No cutting of original tubing is necessary).
- Many flame pattern types available
- Thermocouple or thermopile options
- Spark electrode available
- Horizontal or vertical gas inlet
- Several mounting bracket types available
- Aerated pilots with non-linting characteristics
This ignitor flame rod assembly is designed for Smart valve pilots. It can be used with the Q313 thermopile generator. This assembly is designed for 750 mV power pile applications.
- Variety of mounting brackets available
- Variety of tip styles provides desired flame pattern
- Interchangeable, color-coded orifice and inlet fittings available
- Convert between natural and LP gas
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Q3200U Universal Hot Surface Igniter Kit is designed to provide a robust field service replacement igniter, in gas fired appliances with Norton / St. Gobain / CoorsTek 120 Vac, silicon carbide, hot surface igniters. Pack of 6 igniters. Replaces over 110 OEM igniter models.
- Each igniter package includes cross reference instructions, six brackets, and installation accessories
- Robust Silicon nitride igniter construction
- Igniter application templates enable quick bracket selection
- Remote flame sense appliance applications only
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Emerson 768A series 80-Volt hot surface nitride ignitors feature teflon coated leads. This ignitor should be used with hot surface ignition for residential furnaces (Silicon Nitride replacement only). This ignitor has a 2-terminal AMP receptacle with 0.084 female sockets.
- Teflon coated leads
- 2 terminal AMP receptacle, 0.084 female sockets
- Replaces Lennox 41K5601, 768A-4 and Rheem 62-24134-02
- 2-terminal amp receptacle with 0.084 in. female socket
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
This is a genuine Goodman replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with Goodman packaged units.
- Furnace hot surface ignitor
- Fits Goodman furnaces
- Manufactured with quality in mind
- Compatible with Goodman furnaces
This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.
- Furnace hot surface ignitor
- Fits GOODMAN furnaces
- Manufactured with quality in mind
- Compatible with GOODMAN furnaces
Universal hot surface ignition module replaces multiple field installed hot surface ignition. Uses a 120 VAC igniter. Includes cross reference, instructions, and accessories for easy replacement.
- Replaces over 800 White-Rodgers, Robert Shaw and Honeywell hot surface ignition models
- For 120 VAC (up to 5.0 Amp) surface igniter (Norton 201/271 or equivalent)
- S8910U 3000 series has LED status indicator and micro ammeter ports for easy trouble shooting
- For local (single rod) or remote (dual rod) rectification type flame sensing
Universal Integrated Furnace Control Two-Stage Hot Surface Ignition for 3-Speed (ECM Blower Motor Systems). Includes 21D64-2 Universal Silicon Nitride Ignitor Upgrade Kit. Replaces White-Rodgers 50V51-xxx and 50V61-xxx 2-Stage HSI Systems with 80-Volt or 120-Volt Ignitors
- Reduces inventory by providing maximum control replacement coverage
- Includes a universal 120V nitride ignitor to allow replacement of 80V and 120V controls
- Diagnostic LED indicators streamline installation and system troubleshooting
- 120V air cleaner output and 120V humidifier output up to 1 Amp max
- Factory standard safety timings and adjustable fan delay options
- Replaceable automotive style fuse
The Emerson 50E47-843 universal silicon carbide non-integrated hot surface ignition module replacement kit. This ignition module replaces most White-Rodgers 50E47 and most competitive modules. This module offers easy installation with the double-sided foam black tape (included in the box).
- Program keys for multiple timings
- Flash code diagnostics for easy service
- Direct and indirect flame sense compatible
- Includes double sided foam black tape for easy installation
- Fenwall Ignition Control for use with Magic-Pak HWC182, HWC242 and HWC302 Model Units
Universal Integrated Furnace Control Hot Surface Ignition. Includes 21D64-2 Universal Silicon Nitride Ignitor Upgrade Kit. Replaces over 200 OEM & Competitive Ignition Modules Including Carrier, Goodman, Trane, York and S9200U, Kit Replaces over 300 Models and Includes Wire Harnesses K & L to Replace Carrier Controls: HK42FZ004, HK42FZ007, HK42FZ008, HK42FZ009, HK42FZ011 or HK42FZ016.
- Replaces over 200 OEM and competitive single stage ignition modules to make repair quick and easy
- Comes with long lasting universal ignitor which will prevent future breakdowns
- Can be used in 120-Volt silicon carbide and 80-Volt silicon nitride ignition applications
- Fast install kit includes everything you need for quick and accurate replacement
- LED diagnostics for quick troubleshooting
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC
Ignitor Coil. Pilots,ignitors,electrodes. Mfg #RTG20235C
- Pilots,ignitors,electrodes
- Pack of 1
- Product Weight is 0.090 lbs.
- Product length is 2.150 ins.
Hot Surface Ignitor
- Silicon Carbide
- RAPID HEAT-UP
- THERMOFLEX 500 Insulation
This is a genuine Trane OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine Trane OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More Trane OEM parts available through special orders
Ignitor
- Aluminum Oxide Insulation
- Removable Brass Terminal Nut
- Porcelain
Ignitor
- Ignitor Length: 3/4"
- Connection: 2-Pin
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This is a genuine Trane OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine Trane OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More Trane OEM parts available through special orders
Electrode Assembly. Pilots,ignitors,electrodes. Mfg #22-100001-117
- Pilots,ignitors,electrodes
- Pkg of 1
- Product Height: 6.400
- Product Length: 2.600
Spark Pilot Assembly Nat/Lp. Pilots,ignitors,electrodes. Mfg #002003F
- Pilots,ignitors,electrodes
- Pack of 1
- Weight of the product is 0.280 lbs
- Non Hazardous
Replacementignitorkit With Plug. Hot Surface Ignitors. Mfg #903110A
- Hot Surface Ignitors
- Product height : 3.200in.
- Product length : 3.050 in.
- Non -Hazardous
Nordyne Ignitor Kit 208/230V. ter . Mfg #1046528
- Product Height:4.650 In.
- Product Weight:0.360 Lbs.
- Product Length:4.400 In.
- Package of 1
Silicon Nitride 80-Volt Hot Surface Ignitor. With White Teflon Coated Leads, Steatite Insulator With Steel Zinc Plated Mounting Tab, 2 Terminal Amp Receptacle With .084 in. Female Socket. Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only). Replaces Thermo 768A-143 (380650).
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installtion
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
- Easy install
Ignitor
- Includes Gasket
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Pilot Assembly Powerpile Generator. Pilots,ignitors,electrodes. Mfg #P322398
- Pilot Assembly Powerpile Generator.
- Pilots,ignitors,electrodes
- Product Length:1.800 In.
- Non Hazardous
Ignitor Cable
- High Voltage
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Universal Pilot Burner "Y" Channel. Pilots,ignitors,electrodes. Mfg #J999MYA-2
- Pilots,ignitors,electrodes
- Pkg of 1
- TAA/BAA Compliant
- Height: 3.600
Universal Pilot Burner Single Tip Style Natural And Lp Gas U Style Mounting. Pilots,ignitors,electrodes. Mfg #Q314U1001
- Pilots,ignitors,electrodes
- Pack of 1
- Weight of the product is 0.330 lbs.
- Length of the product is 2.500 in
Ignitor 5 1/4" Leads M-Styl Mntg. Hot Surface Ignitors. Mfg #767A-370
- Hot Surface Ignitors
- Package of 1
- Product Height:3.250 In.
- Product Weight:0.200 Lbs.
Goodman Direct Replacement 120-Volt Hot Surface Silicon Nitride Ignitor. Replaces Goodman 0130F00008(S). Direct Replacement Makes Install Quick and Easy.
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installtion
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
- Easy install
Ignitor Direct Spark Ignitor. Pilots,ignitors,electrodes. Mfg #73K38
- Ignitor Direct Spark Ignitor.
- Pilots,ignitors,electrodes
- Package of 1
- Product Height:2.000 In.
MFG Part# 1171306
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Natural Gas Pilot Assembly With Spark Wire. Pilots,ignitors,electrodes. Mfg #240011102
- Pilots,ignitors,electrodes
- Pkg of 1
- TAA/BAA Compliant
- Height: 4.000
Trane Direct Replacement 120-Volt Nitride Ignitor with 4-1/2 in. Leads and 2-Pin Molex Connector. Mounting Bracket and Screws Are Included. Replaces Trane IGN00152 and IGN00146.
- Premium nitride construction
- OEM spec lead length, dimensions and connectors for fast installtion
- White high temperature Teflon coated leads
- Insulation 250 degree C temperature rating
- Easy install
This is a genuine Carrier OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine Carrier OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More Carrier OEM parts available through special orders