The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

The Emerson 750 millivolt power generator is a replacement for similar screw-in type generators or for use with type E31-12 pilot burners. This generator is for 750 millivolt self-generation control systems. The PG9 adapter is also included in the box.

• 36 in. armored cable leads with split spade terminals
• PG9 adapter and clips included
• Mounting nut, spring clips and PG9 adapter sleeve included
• For use with type E1-12 pilot burner

The 1830 Series Pilot Uni-Kit is designed to be used with all Uni-Line and competitive thermocouples. Kits include an adaptor that converts a threaded thermocouple/thermopile model 2CH to a snap-in thermocouple type, model 2C. Each kit comes with a natural gas orifice installed, and a separate L.P. gas orifice. Pilot tubing size is 1/4 in. tubing. These 1830-Pilot Uni-Kits are aerated type pilots, combining the best feature of an incinerator type pilot and a target type pilot. These pilots have non-linting characteristics, and no air shutters or supplementary shields requiring assembly or adjustment are needed.

• Many flame pattern types available
• Thermocouple or thermopile options
• Spark electrode available
• Horizontal or vertical gas inlet
• Several mounting bracket types available
• Aerated pilots with non-linting characteristics

The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC. some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC

The Robertshaw 1950 and 1951 Series Thermopiles lead the industry for gas appliance applications. Their primary function is to ensure a standing pilot light is operative so that on a call for heat, the main burner gas will be properly ignited. Thermopiles are placed in gas applications to detect the existence of a flame for safety purposes by shutting off the potential gas flow to a burner. A thermopile is the assembly of many thermocouples to increase the millivolt output. Robertshaw thermopiles have two types of connections: coaxial and two-wire spade connectors. The 1950 Series Thermopiles, also known as TP-75, are two-wire spade connectors. The 1951 Series Thermopiles, also known as CP-2 (250 to 750 millivolts), are coaxial connectors. The 1950 and 1951 Series Thermopiles (pilot generators) are designed for use on self-powered gas control systems. They can be used to replace similar competitive devices. It includes PG9 Pilot Adaptor.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

Goodman flame sensor

• Genuine OEM replacement Part
• For use with Goodman & Amana equipment
• OEM part requires no modification for easy installation
• Be sure to reference furnace model and version for appropriate replacement part

The Emerson Hot Rod premium nitride ignitor upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nitride ignitor is connected in the existing HIS (hot surface ignition) system, ensuring consistent performance and long ignitor life. The 21D64-2 kit includes everything needed for a quick installation.

• Nitride Ignitor with 15.5 in. leads - replaces over 150 OEM, White-Rodgers and competitive HIS ignitors
• For gas-fired forced-air furnaces, water heaters and boilers
• Universal breakaway bracket included for easy installation and eliminating the need for multiple brackets
• What's in the box: Nitride Ignitor with 15.5 in. leads, universal mounting bracket, screw mounting adaptor, 2 ceramic wire nuts, furnace labels, instruction booklet
• 5-year warranty

The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.

• Easy burner installation with attached threaded nut
• Stainless steel outer jacket for long life and resistance to heat blistering
• Combination of copper and nickel alloys for good electrical conductivity
• Mica washer to insulate from shorting conditions
• Tinnerman clip included
• Various lengths available for multiple applications

Designed For Molded Shower Stalls

• The Drain Is Installed On The Shower Unit Before It Is Placed
• Stainless Steel Snap-In Strainer
• Compression Gasket
• Reference #140Nc
• Fits 2" Schedule 40 Plastic Or 2" Cast Iron Pipe
• High-quality stainless steel strainer for enhanced durability
• Compatible with 2 in. Schedule 40 plastic or cast iron pipes
• Can be easily installed on the shower unit for quick setup
• Ideal for use in molded shower stalls

The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC

This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.

• Furnace hot surface ignitor
• Fits GOODMAN furnaces
• Manufactured with quality in mind
• Compatible with GOODMAN furnaces

The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC

The Emerson 50A55-843 universal silicon carbide integrated hot surfAce ignition replAcement control kit. This ignition module replAces most Trane, York, ICP, Amana and White-Rodgers models. This module offers easy installation with the mounting plate (included in the box).

• Flash code diagnostics for easy service
• Fused to protect low voltage system transformers
• Includes mounting template
• Adjustable blower delay
• Pre-purge 30-seconds
• Delay heat on 30/45
• Delay heat off 60/90//120/180
• Delay cool on 5
• Delay cool off 45/90
• Input voltage 25 VAC 50/60 Hz

Photoconductive Flame Sensor For Sequencing Oil Burner Systems, Shuts Down Protector lay When Flame Goes Out, 60 in. Leads. Includes Mounting Bracket, Use with Protector lay. On flame failure, the light sensitive cadmium sulfide cell, in conjunction with flame sensing circuitry, causes the Protector lay control to shut down the main oil burner. Glass-to-metal hermetic seal in plug-in cell prevents deterioration by humidity, soot or oil fumes.

• Includes A, B, C, J and P mounting brackets and fuel line adaptor
• Lead wires: NEC class 1, includes 2 flag 1/4 in. quick connects
• Type R bracket
• 120320 replacement cad cell, 7.5 mA minimum sensitivity at 2 ft. candles, 130367 replacement cad cell, 12.0 mA minimum sensitivity at 2 ft. candles

The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC

The 1820 Series Uni-Kits are designed to replace those hard-to-find ITT General PG9 type pilots. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. A special 1/4" tubing adaptor is provided that allows use of original tubing with nut and ball sleeve. (No cutting of original tubing is necessary).

• Many flame pattern types available
• Thermocouple or thermopile options
• Spark electrode available
• Horizontal or vertical gas inlet
• Several mounting bracket types available
• Aerated pilots with non-linting characteristics

This ignitor flame rod assembly is designed for Smart valve pilots. It can be used with the Q313 thermopile generator. This assembly is designed for 750 mV power pile applications.

• Variety of mounting brackets available
• Variety of tip styles provides desired flame pattern
• Interchangeable, color-coded orifice and inlet fittings available
• Convert between natural and LP gas

The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC

The Q3200U Universal Hot Surface Igniter Kit is designed to provide a robust field service replacement igniter, in gas fired appliances with Norton / St. Gobain / CoorsTek 120 Vac, silicon carbide, hot surface igniters. Pack of 6 igniters. Replaces over 110 OEM igniter models.

• Each igniter package includes cross reference instructions, six brackets, and installation accessories
• Robust Silicon nitride igniter construction
• Igniter application templates enable quick bracket selection
• Remote flame sense appliance applications only

The Robertshaw Flame Sensor Assembly and Replacement Sensors have high temperature Kanthol sensor rods that will withstand 1800F (982C). The sensor rod is 4 long and can be cut and bent to match an original unit. Excellent replacement for most manufacturers' flame sensors.

• Includes 30 of Teflon insulated lead wire with a 482 degree F (250 degree C) rating
• Connects to a 1/4 in. quick connect terminal
• Replacement for most OEM flame sensors
• 4 in. sensor rod that can be cut and bent to match an original unit

The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.

• Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
• Designed to reach ignition temperature(s) within 17 seconds
• Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
• Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
• Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC