Searched for "40101700"
Supply your technicians with only the best components to get the job done the right way the first time. These contactors are manufactured from the highest quality materials. Backed by designs that are tried and tested to perform.
- Accordance with U.L. bulletin no. 508 Industrial control equipment, contactors meet specifications for devices up to 600 VAC
- Coils have class B insulation
- Includes lug, spade terminals, and covers
- Single pole include shunt
Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Normally opened / closed type
- 1/4 in. spade connections 5 pin
- Coils frequency 50 Hz/60 Hz
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 24 Hz
- Coil DC resistance 17.5
- Coil MA 334
- Coil nominal VA 9.5
- Coil inrush VA 22
- Time delay relay. 24 volt coil
- On: 1-25 seconds. Off: 65-115 seconds
- Replacement for Goodman B13707-38
- UL® and CSA® approved
- 24 volt control circuit
- Five second delay between all subsequent stages, unless they function together
- Used on gas and electric units
The Emerson 90-244 2 pole is a definite purpose contactor for air conditioning and heating equipment. This contactor features low VA coil for cooler operation. The universal mounting bracket fits existing mounting holes. 24 VAC. 30 Amp.
- Low voltage coil for increased life
- Quiet operation
- Universal mounting bracket fits most applications
- Double break contacts ensure positive make and break
- 24-Volt AC
- Resistance DC OHMS 11
- Current MA 150
- Nominal VA 6
- Maximum inrush VA 32
24-Volt Heat Sequencer, fan and electric, 2 Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
The Emerson 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.
- Terminal markings are equivalent to other types
- 24-Volt input control
- Multi-poise mounting
- Double quick-connect terminals for combination loads
- 1 switch
- On timings 30 - 90 seconds
- Off timings 1 - 30 seconds
This definite purpose contactor meets UL508 specifications for devices up to 600 Vac. The coils have class B insulation. It includes lugs, spade terminals and covers.
- 180/150/120 locked rotor Amps
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Sequencer B12565-51
- HVAC application
- Dimensions: 0.99 in. x 0.99 in. x 0.99 in.
- Quality build
The Emerson 90-370 heavy-duty general-purpose relay for heating and cooling applications and general switching. This is a totally enclosed relay, which operates in any position. This relay provides general-purpose switching for heating and cooling applications.
- SPDT
- 24V VAC coil, 50/60hz
- Resistive DC OHMS 77
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- HVAC application
- Dimensions: 11.25 in. x 8 in. x 0.5 in.
- For use with GOODMAN and Amana equipment
- PCB, defrost control
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- SEQUENCER B12565-52
- HVAC application
- Dimensions: 4 in. x 23.75 in. x 30.75 in.
- Quality build
Enclosed fan relay type 84, 24-Volt coil, SPNO. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Switch action single pole, normally open
- Coils frequency 50 Hz/60 Hz
- Spade connections
Time delay initiates when power is applied. Load is energized at completion of timing cycle. Timer will reset on power interruption or when thermostat disconnects.
- Delay on break timers (DOB)
- Adjustable time delay on break relay 6 seconds to 5 minutes
- 1/4 in. male quick connect terminals
- Cut the jumper wire to use in 120/240-Volts
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
The Emerson 90-290Q through 90-295Q relays for switching single or two speed fan motors, solenoids, relays, resistive loads, and general-purpose switching. This fan relay features a compact, totally enclosed design, which provides quiet, reliable and economical operation. This relay has SPNO switching. 24 VAC.
- Compact and fully enclosed design
- Quiet operation
- SPDT
- 208/240 VAC coil
- Resistance DC OHMS 90
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
The Emerson 24A34-3 Electric Heat Sequencer is a direct replacement for most fan/heat sequencing functions. This sequencer features 2 switches and multi-poise mounting. This sequencer features 2 switches and multi-poise mounting.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 1-20 sec
- Off timings: 40-110 sec
- 24-Volt input control
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
A very durable contacted that is capable of carrying more amperage. Manufactured with quality material that ensures a good direct contact so the device can function properly. This contactor works with 99% of residential AC units.
- 40 inductive Amps
- 50 resistive Amps
- 240/200/160 locked rotor Amps
- Auxiliary switches sold separately
The Emerson 90-118E fan control center combination transformer and relay combination, SPNO/SPNC, 120 V primary. This fan control center can be installed on on a 4 in. x in. junction box. The pre-wired line voltage connections and color-coded and pre-striped leads provide easy installation. Energy limiting class II transformer design and low voltage connections on terminal board.
- 24 VAC secondary
- Line voltage connections pre-wired
- Color coded pre-stripped leads for easy install
- Low voltage connections on terminal board
- Easy installation on a 4 in. x 4 in. junction box
OEM replacement part for First Co. units. AC and heating control board for HB/MB/UCQ units. This board no longer has yellow wire connections.
- Time delay
- pump timer
- fan delays
- TT connections for boilers
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. They offer an efficient design with low VA coil ratings and straight-through wiring.
- Ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac. All single pole include shunt. It also includes lugs, spade terminals and covers. The coils have class B insulation.
- Definite purpose contactors
- 40 resistive Amps
- 30 inductive Amps
- 180/150/120 locked rotor Amps
TD69 (DOM) Delay on Make timer is designed to protect the compressor from short cycling. TD69 has a 1 Amp maximum load switch capacity. On this control, time delay restart begins when power resumes or the thermostat closes.
- Max inrush amps: 10 Amp
- Adjustable time delay on make relay 6-seconds to 8-minutes
- 1/4 in. male quick connect terminals
- Cut the jumper wire to use in 120-Volt/240-Volt
Operating inlet pressure 10 psig. Temperature capabilites: -20° to 160°C or -29° to 71°C. Compliant with NFPA No. 54 and 58 standards. Green, straight through design. 20 year recommended replacement life. 650,000 BTU/HR. 1/2" FNPT Inlet. 1/2" FNPT Outlet. 9.5" to 13" W.C. Outlet Pressure Rating.
- Designed with a 1/2 in. FNPT inlet and 1/2 in. FNPT outlet
- Features an operating inlet pressure of 10 pig
- Rated for 9.5 in. to 13 in. W.C. outlet pressure
- Meets NFPA No. 54 and 58 standards
Designed to replace 2 pole, 30 Amp contactors used in AC and electric heat applications to control the blower motors. Includes 4 terminals and 4 screws. UL File number E328772.
- Non-positional
- Replaces several brands
- Coil voltage: 24 VAC
- Full load amps: 30A
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac. All single pole include shunt. It also includes lugs, spade terminals and covers. The coils have class B insulation.
- Definite purpose contactors
- Auxiliary switches sold separately
- Includes lugs, spade terminals and covers
- Spade terminals and cover only
24-Volt Heat Sequencer. Fan and electric, 1 switch. On timings, 1-20 Seconds. Off timings 40-110 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). 24-Volt input control Multi-pose mounting Any contacts (except M1 and M) can be used as auxiliary contacts Double quick-connect terminals for combination loads Ambient Temperature Rating: -50 to +165 degree F UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 1 switch
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Small products come with big performance. Designed to perform under stressful conditions. These contactors pack a punch.
- Contactors meet UL508 specifications for devices up to 600 VAC
- Coils have class-B insulation
- Includes lugs, spade terminals and covers
- All single pole include shunt
Small products come with big performance. Designed to perform under stressful conditions. These contactors pack a punch.
- Contactors meet UL508 specifications for devices up to 600 VAC
- Coils have class-B insulation
- Includes lugs, spade terminals and covers
- All single pole include shunt
The Honeywell 120-Volt Switching Relay has an internal transformer and is designed for switching 1-line voltage load. It provides intermediate switching of a line-voltage device from a low-voltage controller. Provides intermediate SPST switching of a line voltage device from a low voltage controller.
- For switching one-line voltage load
- Allows intermediate switching of a line voltage device from a low voltage controller
- 2-wire connection
- Easy to install
Fan And Heat Sequencer. On 1 To 20 Seconds. Off 40 To 110 Seconds. 24 Volt Control Circuit. Five Second Delay Between All Subsequent Stages, Unless They Function Together. 40 To 110 Seconds Off Time. Mfg #ELE-NS103
- On 1 To 20 Seconds
- Off 40 To 110 Seconds
- 24 Volt Control Circuit
- Five Second Delay Between All Subsequent Stages, Unless They Function Together
Magic-Pak Sequencer for use with 36HWC, 48HWC and 60HWC Model Units. The HWC8 V-Series units are self-contained, gas-fired heating with electric cooling models. The unit design has been certified by Intertek Testing Services for compliance with the latest edition of the American National Standard ANSI Z21.47 for direct vent central furnaces. The HWC8 models are certified to be in compliance with the latest edition of A.H.R.I. Standard 390. All models are design certified for heating operation when fired with natural or propane gas.
- Electric Heat Sequencer
- Use with 36HWC
- Use with 48HWC
- Use with 60HWC
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac. All single pole include shunt. It also includes lugs, spade terminals and covers.
- Coils have class B insulation
- Includes lugs, spade terminals and covers
- 50/60 hertz
- Definite purpose contactor
24-Volt Heat Sequencer, fan and electric with 4 switches. On timings, 1-110 Seconds. Off Timings 1-110 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). 24-Volt input control and Multi-pose mounting. UL component recognized.
- Direct replacement for most fan/heat sequencing functions
- 4 switches
- On timings: 1-110 seconds
- Off timings: 1-110 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. They offer an efficient design with low VA coil ratings and straight-through wiring.
- Ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Magic-Pak Time Delay Relay for use with 36HWC, 48HWC, and 60HWC New Style Model Units. The HWC8 V-Series units are self-contained, gas-fired heating with electric cooling models. The unit design has been certified by Intertek Testing Services for compliance with the latest edition of the American National Standard ANSI Z21.47 for direct vent central furnaces. The HWC8 models are certified to be in compliance with the latest edition of A.H.R.I. Standard 390. All models are design certified for heating operation when fired with natural or propane gas.
- Magic-Pak Time Delay Relay
- Use with 36HWC
- Use with 48HWC
- Use with 60HWC
T-Stat 3 Speed On-Off T422
- On-Off
- 3 Fan Speeds
- High-Med-Low
- T422
The Emerson 90-341 two pole double throw semi-enclosed relay is for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This switching relay is a 2 Pole relay with 115/120 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 115/120 Hz
- Coil DC resistance 420
- Coil MA - 66
- Coil nominal VA 9.5
- Coil Inrush VA 22
24-Volt Heat Sequencer, fan and electric, 3 Switches. On timings, 1-110 seconds. Off timings 1-110 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). 24-Volt input control and multi-pose mounting. UL component recognized.
- Direct replacement for most fan/heat sequencing functions
- 3 switches
- On timings: 1-110 seconds
- Off timings: 1-110 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
Definite Purpose Contactor. 30 Amp. Double Pole. 24 Volt Coil. Replaces Cutler-Hammer, Honeywell And Mars. Silver Cadmium Oxide Contacts. Interchangeable Mounting With Many Competitive Contactors. Space Saving Dimensions Allow For Smaller Panels And More Wiring Room. Economically Priced. Mfg #DP30242
- 30 Amp
- Double Pole
- 24 Volt Coil
- Replaces Cutler-Hammer, Honeywell And Mars
CONT2P040024VS GOODMAN Replacement Air Handler Contactor complies with warranty parts requirements for GOODMAN HVAC Equipment. GOODMAN Replacement parts are direct OEM replacements that requires no modifications for ease of replacement. Please review your GOODMAN Equipment Product Specifications to ensure that CONT2P040024VS replacement Ceiling Mount Air Handler Contactor is the applicable replacement part for your system.
- For use in GOODMAN and Amana furnaces
- Genuine OEM replacement part
- Be sure to reference furnace model and version for appropriate replacement part
- OEM part requires no modification for easy installation
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This control features 4x4 junction box for easy installation. The pre-wired line voltage connections and color-coded pre-striped leads provide easy installation.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 208/240 Hz
- Coil DC resistance 1600
- Coil MA 38
- Coil nominal VA 9.5
- Coil inrush VA 22
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine Carrier OEM part. Installation by a licensed professional is recommended. This part is suitable for HVAC applications.
- Genuine Carrier OEM part
- Suitable for use in HVAC applications
- Professional installation recommended
- More Carrier OEM parts available through special orders