Hvac Controls
The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
Rectorseal Safe-T-Switch SS2 New
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- POP Blister packaged
- Mfg #97087
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- POP Blister packaged
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 24 Hz
- Coil DC resistance 17.5
- Coil MA 334
- Coil nominal VA 9.5
- Coil inrush VA 22
24-Volt Heat Sequencer, fan and electric, 2-Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Normally opened / closed type
- 1/4 in. spade connections 5 pin
- Coils frequency 50 Hz/60 Hz
The 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.
- Terminal markings are equivalent to other types
- 24-Volt input control
- Multi-poise mounting
- Double quick-connect terminals for combination loads
- 1 switch
- On timings 30 - 90 seconds
- Off timings 1 - 30 seconds
Goodman flame sensor
- Genuine OEM replacement Part
- For use with Goodman & Amana equipment
- OEM part requires no modification for easy installation
- Be sure to reference furnace model and version for appropriate replacement part
The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
Supply your technicians with only the best components to get the job done the right way the first time. These contactors are manufactured from the highest quality materials. Backed by designs that are tried and tested to perform.
- Accordance with U.L. bulletin no. 508 Industrial control equipment, contactors meet specifications for devices up to 600 VAC
- Coils have class B insulation
- Includes lug, spade terminals, and covers
- Single pole include shunt
Goodman Oem Control Board. Style: Ecm time delay
- Genuine OEM replacement Part
- For use with Goodman & Amana equipment
- OEM part requires no modification for easy installation
- Be sure to reference furnace model and version for appropriate replacement part
The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
Rectorseal Safe-T-Switch SS3 New
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- POP Blister packaged
- Fits 1" to 2" drain pan height
- Mfg #97089
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- POP Blister packaged
- Time delay relay. 24 volt coil
- On: 1-25 seconds. Off: 65-115 seconds
- Replacement for Goodman B13707-38
- UL® and CSA® approved
- 24 volt control circuit
- Five second delay between all subsequent stages, unless they function together
- Used on gas and electric units
Rectorseal Safe-T-Switch SS1 New - Primary drain line shut-off switch, detects clogged A/C condensate drains
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- Code compliant inline cleanout
- Cleanout Tool
- Mfg #97085
- Condensate Overflow Switch
- Adjustable ratcheting float level
- Magnetic reed switch
- Code compliant inline cleanout
The Emerson 90-244 2 pole is a definite purpose contactor for air conditioning and heating equipment. This contactor features low VA coil for cooler operation. The universal mounting bracket fits existing mounting holes. 24 VAC. 30 Amp.
- Low voltage coil for increased life
- Quiet operation
- Universal mounting bracket fits most applications
- Double break contacts ensure positive make and break
- 24-Volt AC
- Resistance DC OHMS 11
- Current MA 150
- Nominal VA 6
- Maximum inrush VA 32
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw 1950 and 1951 Series Thermopiles lead the industry for gas appliance applications. Their primary function is to ensure a standing pilot light is operative so that on a call for heat, the main burner gas will be properly ignited. Thermopiles are placed in gas applications to detect the existence of a flame for safety purposes by shutting off the potential gas flow to a burner. A thermopile is the assembly of many thermocouples to increase the millivolt output. Robertshaw thermopiles have two types of connections: coaxial and two-wire spade connectors. The 1950 Series Thermopiles, also known as TP-75, are two-wire spade connectors. The 1951 Series Thermopiles, also known as CP-2 (250 to 750 millivolts), are coaxial connectors. The 1950 and 1951 Series Thermopiles (pilot generators) are designed for use on self-powered gas control systems. They can be used to replace similar competitive devices. It includes PG9 Pilot Adaptor.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
A very durable contacted that is capable of carrying more amperage. Manufactured with quality material that ensures a good direct contact so the device can function properly. This contactor works with 99% of residential AC units.
- 40 inductive Amps
- 50 resistive Amps
- 240/200/160 locked rotor Amps
- Auxiliary switches sold separately
The 24A34-3 Electric Heat Sequencer is a direct replacement for most fan/heat sequencing functions. This sequencer features 2 switches and multi-poise mounting. This sequencer features 2 switches and multi-poise mounting.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 1-20 sec
- Off timings: 40-110 sec
- 24-Volt input control
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- SEQUENCER B12565-52
- HVAC application
- Dimensions: 4 in. x 23.75 in. x 30.75 in.
- Quality build
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (Crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 750 millivolt power generator is a replacement for similar screw-in type generators or for use with type E31-12 pilot burners. This generator is for 750 millivolt self-generation control systems. The PG9 adapter is also included in the box.
- 36 in. armored cable leads with split spade terminals
- PG9 adapter and clips included
- Mounting nut, spring clips and PG9 adapter sleeve included
- For use with type E1-12 pilot burner
The 90-370 heavy-duty general-purpose relay for heating and cooling applications and general switching. This is a totally enclosed relay, which operates in any position. This relay provides general-purpose switching for heating and cooling applications.
- SPDT
- 24V VAC coil, 50/60hz
- Resistive DC OHMS 77
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures. Various lengths are available.
- Easy burner installation with attached threaded nut
- Stainless steel outer jacket for long life and resistance to heat blistering
- Combination of copper and nickel alloys for good electrical conductivity
- Mica washer to insulate from shorting conditions
- Tinnerman clip included
- Various lengths available for multiple applications
This definite purpose contactor meets UL508 specifications for devices up to 600 Vac. The coils have class B insulation. It includes lugs, spade terminals and covers.
- 180/150/120 locked rotor Amps
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
Enclosed fan relay type 84, 24-Volt coil, SPNO. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Switch action single pole, normally open
- Coils frequency 50 Hz/60 Hz
- Spade connections
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The White-Rodgers Hot Rod premium nitride ignitor upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nitride ignitor is connected in the existing HIS (hot surface ignition) system, ensuring consistent performance and long ignitor life. The 21D64-2 kit includes everything needed for a quick installation.
- Nitride Ignitor with 15.5 in. leads - replaces over 150 OEM, White-Rodgers and competitive HIS ignitors
- For gas-fired forced-air furnaces, water heaters and boilers
- Universal breakaway bracket included for easy installation and eliminating the need for multiple brackets
- What's in the box: Nitride Ignitor with 15.5 in. leads, universal mounting bracket, screw mounting adaptor, 2 ceramic wire nuts, furnace labels, instruction booklet
- 5-year warranty
Universal hot surface ignition module replaces multiple field installed hot surface ignition. Uses a 120 VAC igniter. Includes cross reference, instructions, and accessories for easy replacement.
- Replaces over 800 White-Rodgers, Robert Shaw and Honeywell hot surface ignition models
- For 120 VAC (up to 5.0 Amp) surface igniter (Norton 201/271 or equivalent)
- S8910U 3000 series has LED status indicator and micro ammeter ports for easy trouble shooting
- For local (single rod) or remote (dual rod) rectification type flame sensing
24-Volt Heat Sequencer. Fan and electric, 1-switch. On timings, 1-20 Seconds. Off timings 40-110 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). 24-Volt input control Multi-pose mounting Any contacts (except M1 and M) can be used as auxiliary contacts Double quick-connect terminals for combination loads Ambient Temperature Rating: -50 to Plus165 ° F UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 1 switch
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-Gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC. some modules are rated for 208-Volt/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
Mr. Heater Original Tank Top replacement thermocouple for original series models MH12-and MH24-. Copper construction and milled brass fittings. Prevents unburned propane releasing.
- Replacement for original series Mr. Heater tank tops models: MH12, MH12C, MH12T, MH12CS, MH12TS, MH24T, MH24TS, MH42T
- Copper construction
- Milled brass fittings
- Prevents unburned propane release
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Sequencer B12565-51
- HVAC application
- Dimensions: 0.99 in. x 0.99 in. x 0.99 in.
- Quality build
The White-Rodgers 50A55-843 universal silicon carbide integrated hot surfAce ignition replAcement control kit. This ignition module replAces most Trane, York, ICP, Amana and White-Rodgers models. This module offers easy installation with the mounting plate (included in the box).
- Flash code diagnostics for easy service
- Fused to protect low voltage system transformers
- Includes mounting template
- Adjustable blower delay
- Pre-purge 30-seconds
- Delay heat on 30/45
- Delay heat off 60/90//120/180
- Delay cool on 5
- Delay cool off 45/90
- Input voltage 25 VAC 50/60 Hz
The 90-290Q through 90-295Q relays for switching single or two speed fan motors, solenoids, relays, resistive loads, and general-purpose switching. This fan relay features a compact, totally enclosed design, which provides quiet, reliable and economical operation. This relay has SPNO switching. 24 VAC.
- Compact and fully enclosed design
- Quiet operation
- SPDT
- 208/240 VAC coil
- Resistance DC OHMS 90
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
This is a genuine GOODMAN replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with GOODMAN packaged units.
- Furnace hot surface ignitor
- Fits GOODMAN furnaces
- Manufactured with quality in mind
- Compatible with GOODMAN furnaces
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- HVAC application
- Dimensions: 11.25 in. x 8 in. x 0.5 in.
- For use with GOODMAN and Amana equipment
- PCB, defrost control
The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems. The applications include: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
Controls high limit and fan motors in forced air heating systems. Turns fan on and off according to plenum temperature via helical bimetal sensing element. High limit stop set at 200 degree F (93C degree ). Breakaway Jumper included. Includes manual and automatic fan on/off settings. Replaces L4064A, B and E.
- 3 wiring terminal options available for easy installation
- Push-in receptacles for stripped wire
- Female receptacles for 1/4 in. male flag connectors
- Auxiliary screw terminals
- Field adjustable fan and high limit settings
- Fenwall Ignition Control for use with Magic-Pak HWC182, HWC242 and HWC302 Model Units
This is a genuine Goodman replacement part. This ignitor can be used in HVAC gas ignition controls. It is compatible with Goodman packaged units.
- Furnace hot surface ignitor
- Fits Goodman furnaces
- Manufactured with quality in mind
- Compatible with Goodman furnaces
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
The 768A series 80-Volt hot surface nitride ignitors feature teflon coated leads. This ignitor should be used with hot surface ignition for residential furnaces (Silicon Nitride replacement only). This ignitor has a 2-terminal AMP receptacle with 0.084 female sockets.
- Teflon coated leads
- 2 terminal AMP receptacle, 0.084 female sockets
- Replaces Lennox 41K5601, 768A-4 and Rheem 62-24134-02
- 2-terminal amp receptacle with 0.084 in. female socket
Universal intermittent pilot ignition module replaces multiple field installed intermittent pilot modules supplied by Honeywell, Robertshaw, Johnson and UTEC (HSC). Uses existing intermittent pilot burner. Includes cross reference, instructions and accessories for easy replacement.
- Replaces over 400-white-rogers, robertshaw and honeywell intermittent pilot ignition modules
- Provides ignition sequencing, flame monitoring and safety shutoff for intermittent pilot warm air furnaces and heating appliances
- Provides 100% pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated, ignition trial/delay sequence is repeated until the appliance lights or call for heat is removed
- For use with natural or LP gas
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The Robertshaw Carbide Series Hot SurfAce Ignitors deliver dependable ignition in heating systems. The applications include: furnAces, boilers, rooftop heaters, infrared burners, unit heaters, and water heaters. They can also be used in many other types of HVAC equipment.
- Made from high-purity recrystallized silicon carbide. (CrystarTM) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in plAce for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120-Volt AC, some modules are rated for 208/240-Volt input, however, the voltage to the ignitor is stepped down to 120-Volt AC
The 1820 Series Uni-Kits are designed to replace those hard-to-find ITT General PG9 type pilots. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. A special 1/4" tubing adaptor is provided that allows use of original tubing with nut and ball sleeve. (No cutting of original tubing is necessary).
- Many flame pattern types available
- Thermocouple or thermopile options
- Spark electrode available
- Horizontal or vertical gas inlet
- Several mounting bracket types available
- Aerated pilots with non-linting characteristics