Hvac Tools
Cleans and straightens fins Sliding tension bars adjust to various fin sizes Stainless steel teeth. Cushioned handle is contoured to protect your knuckles. Helps keep air conditioners, condensing units running efficient. Works on most air conditioning and refrigeration coils.
- Stainless steel teeth
- Cushioned red handle to protect your knuckles
- Straightens damaged condenser and evaporator fins quickly and easily
- Increases air conditioner efficiency
SF3813 Features a heavy-duty all brass holder with a textured grip. The brass cap is a valve core wrench tool. SF3813 comes with (3) valve cores. The valve cores are stainless steel and brass and are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Holds 3 cores
- Brass construction
- 3 in. L
- Cores manufactured per ARI 720-97
Gasket replacement part for 1/4 in. quick couplers. Replacement gasket pack of 10. For use with standard hoses.
- Gasket replacement
- 10 pack
- Replacement gasket 1/4 in.
- 1/4 in. gasket
M2 2-Valve classic brass manifold with 60 in. hoses. Full flow free floating dual o-ring sealing system design for faster evacuation and charging. Heavy duty all metal gauge cases for added durability.
- 2-valve classic brass manifold
- 2-1/2 in. gauge size
- Original free floating dual o-ring sealing system
- Comes with CCLE-60 hoses set
Kobra series gasket seal quarter-turn ball valve hose set.Includes 3/8 in. black hose 1/4 in. x 1/4 in. with ball valve.Meets non-venting requirements by trapping refrigerant with ball valve.
- 60 in. ball valve hose set B/Y/R and 3/8 in. black hose
- Kobra gasket seal quarter-turn
- Meets non-venting requirement
- 800 psi working, 4000 psi burst
Fan blade puller used in applications where the fan blade is bound up. Fine thread version provides additional torque and pulling power. Made from heavy-duty steel.
- Steel center shaft
- 4 pull fingers
- Alignment tool included
- Has flats for wrench
The JB ATLAS refrigerant charging scale is designed for the HVAC/R industry. Every day users will appreciate the advanced solid state load cell for superior sensitivity (0.25 oz./ 10 gm) and accuracy. The ATLAS's 220 pound (100 kg) weight capacity, all metal construction, heavy duty plastic storage case, and easy to read hand held combine to make the ATLAS the best overall package in the industry. Pound for Price our 220 pound scale competes at a 110 pound price. Operates with a 9-Volt battery (included). 220 lb. (100 kg) Capacity Pieces are modularized so parts are easily replaced without need to purchase entirely new unit Displays weight in decimal pounds, pounds and ounces, and kilograms Auto shut off after 30 minutes to preserve battery and can be disabled.
- 220 lb. (100Kg) capacity
- Easy to read LCD screen
- Field repairable
- Protective carrying case
Hex Key Adapter. For use 3/16 in. and 5/16 in. hex valve. Heat treated black oxide plated hex key adapter for accessing liquid and suction based valves.
- Hex key adapter
- 3/16 in.
- 5/16 in.
- Hex valve
Core removal tool designed for removing and replacing a in. Schrader in. type core without losing the charge. All brass construction. Not compatible with R-410A.
- Brass construction
- Not compatible with R-410A
- Designed for removing and replacing a Schrader type core without losing the charge
- Made in China
Secure Seal Adapter. 1/4 in. QC x 1/4 in. SAE 90 degree. All brass adapter.
- Secure seal adapter
- 1/4 in. QC x 1/4 in. SAE 90 degree
- UL for R410A
- Solid brass
With 1 hand operation, the MFD10 provides the fastest measurements of capacitor values. The MFD10 capacitor tester can reliably test all capacitors from 0.01F to 9,999F. This includes all types of start and run capacitors used in the refrigeration and air conditioning industries. The MFD10 is designed to meet all industrial specifications and service requirements.
- Range 0.01 to 9,999 MFD
- Soft carrying case included
- Test clip storage within case
- LED display
Kobra high pressure hoses. Series has gasket seal fitting, the depressor is set to ARI standard for the access valve core, and blow-out resistant depressor and barrel gasket. Pressure rating 800 psi and 4000 psi burst. Suitable for R-410A.
- Gasket seal hose
- High pressure charging hose set suitable for R-410A
- Blow-out resistant gasket locks into cup of fitting
- Barbed depressor to guide the valve core into place
Use with existing charging hose. Immediately traps refrigerant discharge from hose when disconnected from access fitting to reduce loss of refrigerant and prevent in.finger burn in.. Replacement parts available.
- 1/4 in. QC x 1/4 in. SAE
- Secure seal apadter
- UL for R410A
- Solid brass
Reform set for producing precision 45 degree single flares. Sizes included: 3/16 in., 1/4 in., 5/16 in., 3/8 in., 1/2 in., and 5/8 in.. Includes flaring tool, 45 degree cone, expander pin, tube cutter and case.
- For producing precision 45 degree single flares and precision sockets on soft and hard tubes
- Use with cooper, brass, aluminium and steel tubes
- Set includes basic tool, 45 degree cone, expander pin, internal and external deburrer
- Plastic case
- Intelligent tip design that senses the condition of the environment, to eliminate the potential of false alarms
- Flexible 15.5†probe for difficult to reach locations
- Sensitivity: HIGH ? 0.15 oz./yr (4 g/yr); MEDIUM ? 0.25 oz/yr (7 g/yr); LOW ? 0.50 oz/yr (14 g/yr)
- Display: Six vertical LED’s (red, yellow or green)
- Detects all refrigerants (CFC’s, HCFC’s, & HFC’s and blends)
- Sensor life: 2000 hours
- Operating temperature range: 0 to 140 °F
- Power: Two C Alkaline 6000 mAh batteries, batteries included
- Flexible 15.5 probe for difficult to reach locations
- Sensitivity: HIGH 0.15 oz./yr (4 g/yr); MEDIUM 0.25 oz/yr (7 g/yr); LOW 0.50 oz/yr (14 g/yr)
- Display: Six vertical LEDs (red, yellow or green)
- Detects all refrigerants (CFCs, HCFCs, & HFCs and blends)
- Sensor life: 2000 hours
- Operating temperature range: 0 to 140
- Power: Two C Alkaline 6000 mAh batteries, batteries included
Core Removal Tool with access port. Specifically designed to valve off the system to remove valve cores, this core remover has a access port. The valve core can be completely removed and replaced without losing system charge.
- Removing valve core without losing system charge
- Quick connect 1/4 in., flare run 1/4 in., side port 1/4 in.
- Features a quarter turn ball valve shut-off fitting and o-ring seals
- Speed up evacuation, recovery, or recharging time through the full flow port
Reversible Ratchet Wrenches. Double Sided Square Or Square/Hex Openings. For Use On A/C System. Hex Adapter Modifies Square Opening To Hex Opening.
- 3/16 in., 1/4 in. square x 1/2 in., 9/16 in. hex port
- Available in offset, hex and square ends
- For use on A/C system service valves
- N/A
Zeppelin 4-Valve Forged Aluminum Manifold with 60 in. hoses. Rubber handwheels for improved grip and reduced turns. Full 3/8 in. bore evacuates 40% faster.
- Zeppelin 4-valve aluminum body manifold
- Rubber handwheel
- Full 3/8 in. bore evacuates 40% faster
- Rubber hand wheels
Single 72 in. (182 cm) yellow standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi working
- 3000 psi burst
- Ideal for use with all standard refrigerant
- Detects all refrigerants HFC,CFC,HCFC and blends
- Heated tin oxide element
- Sensor life 2000 hours
- Response time less than 1 second
- Battery 2 -C
- Operating temperature Range 0 to 120 F
- Probe Intelligent Tip with environment sensing to eliminate false alarms
- 15.5 inch probe, six vertical LED
- Low, medium and high sensitivity ranges
- Detects: Acetone, Acetylene, Ammonia, Benzene, Butane, Butanol, Chlorine, Ethane, Ethanol, Gasoline, Hexane, Hydrogen, Hydrogen Sulfide, Isobutane, Methane (natural gas), Methanol, Methyl Acetate, Methyl Chloride, Methyl Ether, Naptha, N-Butane, Pentane, Propane, Propanol, Sulfer Dioxide & Trichloroethane
- Features include a rolling stop which protects the cutting wheel, a protected screw spindle to defend against dirt and jamming, and a lightweight cast aluminum body
- The deburrer swivels up and spare cutting wheel is stored in the handle
High and low side replacement gauges for the M2-22231. Use with R22, R40A, and R-410A. All steel cases on standard gauges. High impact clear view Lexan lens. JB offers an Exclusive 3- 1/8 in. (80 mm) illuminated gauge. The glow-in-the-dark dials store energy to emit light in dimly lit or dark applications.
- 3-1/8 in. illuminating pressure gauge
- R22, R404A, R410A
- 80 mm pressure gauge
- N/A
M2 2-Valve classic brass manifold with 36 in. hoses. Full flow free floating dual o-ring sealing system design for faster evacuation. Heavy duty all metal gauge cases for added durability.
- 2-valve classic brass manifold
- Full flow free floating dual o-ring sealing system
- Field repairable
- Easy to read color coded refrigerant dials
For use with R22, R404A, and R-410A. Original free floating dual o-ring sealing system for faster evacuation/charging. Angled bar with knuckle clearance. Surge dampened gauges for reduced needle movement. Heavy duty metal gauge cases. Replaceable intake/hose fittings for easy repair. Manifold; includes 60 in. Kobra hose set and 3-1/8 in. glow-in-the-dark gauges. Min. Order: 1 EA.
- 2-valve classic brass manifold
- 3-1/8 in. Illuminating gauge
- Full flow free floating dual o-ring sealing system
- Faster evacuation and charging