Searched for "40140000"
Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.
- Isolated end switch
- 24 VAC powered
- For Taco series 570 zone valves (570, 571, 572, and 573)
- Allows for service of valve without removing it
The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.
- Repair part
- Includes casing body bolts
- Easy to install
- 3-year warranty
This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
Cast Iron Construction
- Couples Motor To Pump Inside Bearing Assembly Housing
- Fits B&G Series HV Pumps & Armstrong #H-32
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1/2 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum safe operating pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
The Taco 1 in. cast iron Freedom Flange set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a heating system
- Compatible with a wide variety of Taco circulators
- 1 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Easily Isolates the Pump for Replacement
- Replaces 8 components, eliminates 7 leak paths, saves approximately one hour in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents Electrolysis and Eliminates Galvanic Corrosion
- Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve. This carbon steel tank is pre-charged at 12 PSI, tank volume is 2.1 gallons and features a durable expansion membrane that prevents contact of the water with the air in the tank. This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy finish, mounts to supply piping, 1/2 inch MNPT system connection and a 0.302-32 inch charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements. The maximum working pressure is 75 PSI (5.3 BAR).
- Precharged to 12 psi
- Rugged flexible butyl diaphragm
- Inline and free standing models
- Steel construction
3 Year Warranty
- System Lubricated
- Bronze Body Construction For Potable Water
- 115-volt motor ensures reliable performance
- Pump with 5.2 maximum PSI and 37 maximum GPM
- High-quality bronze body enables long-term use
- Suitable for potable water
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The Taco 3/4 in.cast iron Freedom Flange set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a hydronic heating system
- Compatible with a wide variety of Taco circulators
- 3/4 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve. This carbon steel tank is pre-charged at 12 PSI, tank volume is 4.5 gal. and features a durable expansion membrane that prevents contact of the water with the air in the tank. This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy , mounts to supply piping, 1/2 in. MNPT system connection and a 0.302-32 in. charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements. The maximum working pressure is 75 PSI (5.3 BAR).
- 4.5 gal. tank
- Rugged flexible butyl diaphragm
- Inline and free standing models
- Steel construction
- Precharged to 12 PSI
- Max. Pressure 75 PSI
- Durable expansion membrane prevents contact of water with the air in the tank
- Carbon steal with epoxy
- Commercial and residential applications
- 1/2 in. MNPT system connection
Character size 1/8"
- Steel dies
- Exclusive thumb grip
- Sharp characters for deep impression
- Wood box holder
- Pkg of 27
- Black
- Sharp engraved characters to ensure deep impression
- Features exclusive thumb grip for convenient handling
- Steel dies for durability and versatility
- Wooden box holder for keeping the letter stamps organized
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Electrical connections (in.) screw terminal block
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- Valve designed for cycling (not constantly powered on) applications
- Quick fit pushbutton powerhead makes it easy to remove for service
- Innovative motor technology offers silent operation, water hammer resist and longer life
- Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
- Easy to install and operate
This 3/4 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of chrome plated body, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
ThIS Boiler Rest Control is designed to improve performance in your hot water heating systems by regulating the supply water temperature of a single boiler based on the outdoor temperature. It utilizes a heating curve to set the relationship between outdoor temperature and supply water temperature to provide optimum control and comfort. Thanks to its integral microprocessor, the PC700 Boiler Reset Control is able to continuously adjust the boiler differential to avoid boiler short-cycling and large temperature swings, Standard functions include warm weather shut down, minimum boiler supply temperature setting, and a starting water temperature setting.
- Regulates water supply temperature of a boiler
- Helps avoid short cycling of the boiler
- Liquid crystal display for temperature
- Warm weather shut down feature
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The Taco 1-1/4 in. cast iron Freedom Flanges set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a hydronic heating system
- Compatible with a wide variety of Taco circulators
- 1-1/4 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.
- For use with Astro 220 and 225 SSU models
- 1-1/4 in. NPSM x 3/4 in. sweat
- Lead free
- Set contains 2 half unions and gaskets
- Easy to install
- For use with copper pipe
- Water tight connection
- High quality
- Genuine factory replacement
- Complies with California & Vermont lead free laws
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum Safe Operating Pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
Body only
- Adjustable
- 11-5/8" L x 1-1/2" H x 3-11/16" W
- Non-Handed
- Cushion backstop
- Single or double action
- Center-hung or offset applications
- Dual valve closing control
- Fixed spring power: RD regular duty #4
- Adjustable spring power #2-#4 meets ADA
- Non-hold open
- Degree of opening: 105 degree
- 5 year warranty
- For doors 30" to 42"
- Features individually controlled valves for sweep and latch speeds
- Designed for 30 in. to 42 in. doors
- Suitable for center-hung or offset applications
- Equipped with adjustable spring power