Searched for "40141616"
Nibco ACR Copper Coupling
- 0.5" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #039923306944
- 0.5" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
AM-1 series adjusts, maintains and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.
- Offers constant water temperature under changing operating conditions
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
- Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
- Features dual purpose mixing or diverting values
- Lead free products have products numbers end in LF
- Available temperature gauge adapter in lead-free brass material with EPDM O-ring
- Maximum safe operating pressure (psi)150 psi
- Minimum flow rate (gpm) 0.5 GPM
- Includes check valves on hot and cold ports
Nibco ACR Copper 90degree Elbow. 0.88" Od. Dezincification Resistant. NFPA 99 Health Care Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #9055600
- 0.88" Od
- Dezincification Resistant
- NFPA 99 Health Care Facilities Gas And Vacuum Systems
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
Nibco ACR Copper Coupling
- 0.63" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #9001193
- 0.63" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
Watts 1 IN Lead Free Reduced Pressure Zone Backflow Preventer Assembly Features Flood Sensor With Sentryplus Alert Technology To Detect Excessive Water Discharges From The Relief Valve Alert features available with add-on sensor connection kit Lead free copper silicon alloy body NPT inlet and outlet connections Quarter turn full port resilient seated ball valve shutoffs Single access cover and modular check construction for the ease of maintenance Internal relief valve for reduced installation clearances Replaceable seats for an economical repair Test cocks are screwdriver slotted Mfg #88004112
- Features Flood Sensor With Sentryplus Alert Technology To Detect Excessive Water Discharges From The Relief Valve
- Alert features available with add-on sensor connection kit
- Lead free copper silicon alloy body
- NPT inlet and outlet connections
AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.
- Offers constant water temperature under changing operating conditions
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
- Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
- Features dual purpose mixing or diverting values
- Lead free products have products numbers end in LF
- Available temperature gauge adapter in lead-free brass material with EPDM O-ring
- Maximum safe operating pressure (psi)150 psi
- Minimum flow rate (GPM) 0.5 GPM
- Includes check valves on hot and cold ports
The Emerson 1361-102 is a 2-wire valve for zoning Hydronic systems up to 50 PSI. This valve is designed for 0.75 in. I.D. tubing, and features built-in auxiliary contacts to control burner or circulator relay. This zone valve is for 3/4 in. tubing.
- Quiet operation
- Valve position shown at all times
- Auxiliary contacts to control a burner or circulator relay
- Motor can be removed from valve without draining systems
- 240F maximum water temp
- Time cycle: open 45 seconds, closed 45 seconds
Danfoss -- Straight Valve Body. For Ra2000 Units. Connection: 3/4" Npt.
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Silent motor and system operation
- Compatibility with a full range of thermostats
- Quality seal and significantly increases service life
- Robust metal-to metal connection
2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Danfoss -- Straight Valve Body. For Ra2000 Units. Connection: 1/2" Npt.
Single zone switching relay should be standard equipment for every installer. No matter what type of job, our single zone switching relay replaces every brand made by every manufacturer. The single zone switching relays are compatible with conventional and programmable thermostats, ul listed and come with a 3-year warranty. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups.
- Compact design
- UL and CSA approved
- 3 year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
Nibco ACR Copper 90degree Long Radius Elbow
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Mfg #9080400
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- with stop
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Nibco Copper Coupling. Mfg #9020400
- 0.75" Inlet
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Without Stop
Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.
- Standard checkout procedure
- Robust push terminals
- Common-Sense LEDs
- Clean, professional installation
2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
3 ZONE VALVE CONTROL
- Controls (3) Zones
- Built in Switchable Priority
- External Indicator Lights
- Simplified Wiring
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are ul listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3 year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
- Factory tested
- Isolated end switch
- Field replaceable transformer
- Built in priority
1/8 in. IPS male thread connection. Use screwdriver or coin to operate. 5 years warranty against defect.
- Air vent
- Hot water
- Valve only
- Nickel plated
- Silver
- Specifications
- Safety
- 125 psi
- Fits 1/8 in. threads
- Meets ASME standards
Nibco ACR Copper 90degree Long Radius Elbow C x C
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Mfg #108283
- 0.88" OD
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- with stop
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
This 3/4 in. hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater, and solar applications installed at or near the boiler or hot water heater. It consists of a lead free brass body, solder connections, thermostat, stainless steel springs, and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The temperature range is 120 to 160 degree F (49 to 71 degree C).
- Lead free brass body construction
- Solder connections
- Thermostat assembly is easy to maintain, remove and replace
- Dial adjustment cap
- Designed for domestic water supply systems and recommended for tankless heater, water heater, and solar applications installed at or near the boiler or hot water heater
- Temperature range is 120 to 160 degree F
- High capacity for size
Watts 1 IN Lead Free Anti-Siphon Pressure Vacuum Breaker Backflow Preventer Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures Lead free construction Replaceable seat Female NPT inlet and outlet with quarter turn shutoffs Easy internal access Mfg #T792012
- Includes A Freeze Sensor For Use With Sentryplus Alert Technology To Signal Facility Personnel When Temperature Nears And Reaches The Freezing Point
- Available freeze sensor connection kit to activate a monitoring system that trigger alerts for low and freezing temperatures
- Lead free construction
- Replaceable seat
Use this 1/2 in. hot water extender mixing valve with your boilers and water heaters. This valve features a dial adjustment cap, stainless still springs, solder connections, thermostat and a lead-free brass body. It is hydraulically operated and opens a spring-loaded check in the cold water inlet to allow hot and cold water to mix. It's temperature range is 120 to 160 degrees F.
- Lead free brass body construction
- Solder connections
- Thermostat assembly is easy to maintain, remove and replace
- Dial adjustment cap
- Low pressure drop
- Adjustable knob for temperature control
Honeywell AMX series Direct Connect reduces water heater installation time as the cold and hot port position eliminates the need for typical elbows and tees. New design requires a maximum of just two sweat connections. Requires fewer parts than previous models.
- Designed to be directly installed on water heater hot outlet port
- Offers constant water temperature under changing operating conditions
- Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
- Features brass/stainless construction and Teflon coated of wear surfaces
- Used in domestic hot water
- Hot inlet - female NPT; mixed outlet - male NPT
- Mixed water supply--100 degree F to 145 degree F
- Minimum flow rate 0.25 GPM; recirculation port: 1/2 in. NPT; alternate hot port: 1/2 in. NPT
- 2.3 CV capacity
- Maximum safe operating pressure 150 psi
This 3/4 in. steam radiator valve is used as a shutoff valve in steam or hydronic heating systems. It features a bronze body and angle pattern with FIP x male union connections.
- Bronze body
- Angle pattern
- FIP male union connections
- Rising stem
The 5000 Series Mixing Valve is a dual purpose mixing or diverting valve. It is ASSE 1017 approved, providing shut-off reliability on either a hot or cold water supply failure. The high flow and low headloss characteristics make the 5000 Series ideal for domestic water, radiant applications, installations with large variations in flow rate and supply conditions, and installations requiring tightly controlled water temperature. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature throughout the extended 85Ëš-150ËšF range. The 5000 Series provides fail-safe security and the ultimate performance in a mixing valve.
- Fail-Safe on Hot or Cold Supply Failure
- Delivers Stable Mixed Water Temperature
- Outlet temperature strip
- ASSE 1017 Certified
- Dual Purpose Mixing or Diverting Valve
- Ideal for Domestic Water and Radiant Applications
- Tamper-Proof Cap
- To be used with: low temperature and radiant systems, domestic hot water
This 1/2 in. high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union threaded inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).
- Tight seating check valve
- Purge lever
- High capacity
- Stainless steel strainer
- Union threaded inlet connection
- Used to maintain water pressure in commercial and residential hydronic heating systems at all times
- Provides make-up water to the system in the event of system leaks
Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.
- Bellows or globe valve construction ensures positive shut-off and leak proof operation
- Easy to install
- Manual open (bypass) lever
- 24 VAC powered with isolated end switch
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Nibco ACR Copper Reducer Bushing. 0.88 X 0.75" Od. NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas). Mfg #108286
- 0.88 X 0.75" Od
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- ACR Copper Reducer Bushing
Engineered for reliability, Taco Heat Motor Zone Valves provide a time proven method for system zoning and control. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. Available in a variety of sizes and styles to meet the broad demands of today's systems.
- Bellows or globe valve construction ensures positive shut-off
- Easy to install
- Manual open (bypass) lever
- 24 VAC powered with isolated end switch
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternatives that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
- Replaces 4 components, eliminates 3 leak paths, saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Exclusive adjustable flow path allows for draining from either side of the ball
- Creates cleaner-looking more efficient installations
- Reversible handle for added versatility
Danfoss Aveo Remote Sensor
- Easy To Use
- Thermostatic Sensor
- Remote Sensor
- Mfg #015G4292
- Easy To Use
- Thermostatic Sensor
- Remote Sensor
- Danfoss Aveo
Nibco ACR Copper Coupling
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
- Mfg #039923307125
- 0.75" Tubing
- Dezincification Resistant
- NFPA 99 Healthcare Facilities Gas And Vacuum Systems And The Compressed Gas Association, Pamphlet G4.1 (Medical Gas)
- With Stop
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.
- All models may be installed without disassembling the valve
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- Valve returns to automatic position when power is restored
- Compact construction for easy installation
Taco Switching Relays combine clearly labeled PC board layouts with advanced features that allow for total system customization. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups. All switching relays are UL Listed, are compatible with conventional and programmable thermostats.
- Compact design
- UL and CSA approved
- 3-year warranty
- Fuse protected
- Simplified wiring for ease of installation
- Premium sealed relays
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Patent no. 5,988,201
- Light weight
- Proven durability
- Easy to install
- No clog vent
- 360 degree adjustable collar ring for installation flexibility
- Stainless steel concentrator which eliminates gurgling noise
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Nibco Copper Coupling
- 0.5 x 0.5" Copper Coupling
- With Stop
- Mfg #039923307644
- 0.5 x 0.5" Copper Coupling
- With Stop
- 9002003
- 1-1/2" X 1-1/2"
- 4 in 1 alternative replaces a ball valve and 2 tee fittings and 1 boiler drain
- Quickly connect entire system to cold water feed
- Easily install, isolate, drain and replace any expansion tank
- Pressure rated at 600 WOG
- 1/2" FIP x MIP x FIP x HOSE
2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
Honeywell Home's 802360JA/U is a 24-Volt replacement motor for V8043/44 zone valve. It is the ideal choice for contractors because of its easy installation. When it comes to top quality, Honeywell Home's zone valves can be trusted.
- Valve includes motor mounting screw and lead connectors
- Used with V8043A, V8043E, and V8043F
- Frequency-50 Hz, 60 Hz
- 24-Volt electrical connections
- Electrical connections - 6 in. leads; 152 mm leads
This 1 by 1 in lead free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead free brass body construction, 1 in. NPT threaded female union inlet and 1 in. NPT threaded female outlet, with two plastic replaceable check valves, and stainless steel springs. It is designed for non-health hazard residential water system containment, continuous pressure applications and is to be installed immediately downstream of the residential water meter, in a vertical or horizontal position. The minimum working pressure is 10 psi (69 kPa) and maximum working pressure is 175 psi (12 BAR).
- Lead free brass body for durability
- Can be installed vertically or horizontally
- Compact design
- Meets ANSI/ASSE Standard 1024
- 1 in. union female NPT inlet x female NPT outlet
- Designed for non-health hazard residential water system containment
Quiet operation. Self-aligning barrel-type valve stem uses line pressure to seal off without binding on opening and closing. Valve stem made of stainless steel. Automatic recycling manual operator shows valve position at all times. Built-in auxiliary contacts to control burner or circulator relay. Motor can be removed from valve assembly without draining system.
- Made of corrosion-resistant stainless steel for longer life
- Motor can be removed without draining the system for quick and easy replacement
- Screw terminal wiring panel for easy install
- Quiet operation
- Time cycle: 45 seconds to open; 45 seconds too close
- 15 psi maximum differential across valve
- 3/4 in. tubing size